drivers: misc: ti_dac7512: Remove duplicate driver

The Texas Instruments DAC7512 has the exact same pinout, programming interface and power-down modes as the Texas Instruments DAC121S101 and Analog Devices AD5320, which are already supported by the IIO driver ad5446.c. Remove the duplicate misc driver. This requires user space to migrate to the standardized IIO sysfs ABI. (In other words, it needs to change a filename.) The IIO driver supports the chip's features more fully, e.g. the ability to power down the output or choose one of the available powerdown modes. There is an oddity with the misc driver in that it initializes the SPI slave to SPI_MODE_0, in contradiction to the datasheet which specifies that data is latched in on the falling edge, implying that SPI_MODE_1 or SPI_MODE_2 must be used. Another oddity is that Kconfig and the MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it actually has 12-bit. Datasheets: http://www.ti.com/lit/ds/symlink/dac7512.pdf http://www.ti.com/lit/ds/symlink/dac121s101.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Daniel Mack <daniel@zonque.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
mariux64 · Sep 13, 2017 · 49b3f87 · 49b3f87
1 parent 9cad3b9
commit 49b3f87
Show file tree

Hide file tree

Showing 6 changed files with 14 additions and 116 deletions.
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
@@ -219,7 +219,8 @@ CONFIG_AD525X_DPOT_I2C=m
 CONFIG_ICS932S401=m
 CONFIG_APDS9802ALS=m
 CONFIG_ISL29003=m
-CONFIG_TI_DAC7512=m
+CONFIG_IIO=m
+CONFIG_AD5446=m
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_SPI=m
 CONFIG_IDE=m

diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
@@ -37,7 +37,8 @@ CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ISL29003=y
-CONFIG_TI_DAC7512=y
+CONFIG_IIO=y
+CONFIG_AD5446=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y

diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
@@ -463,10 +463,19 @@ static const struct spi_device_id ad5446_spi_ids[] = {
 	{"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */
 	{"dac101s101", ID_AD5310},
 	{"dac121s101", ID_AD5320},
+	{"dac7512", ID_AD5320},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
 
+#ifdef CONFIG_OF
+static const struct of_device_id ad5446_of_ids[] = {
+	{ .compatible = "ti,dac7512" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad5446_of_ids);
+#endif
+
 static int ad5446_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
@@ -483,6 +492,7 @@ static int ad5446_spi_remove(struct spi_device *spi)
 static struct spi_driver ad5446_spi_driver = {
 	.driver = {
 		.name	= "ad5446",
+		.of_match_table = of_match_ptr(ad5446_of_ids),
 	},
 	.probe		= ad5446_spi_probe,
 	.remove		= ad5446_spi_remove,

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
@@ -393,16 +393,6 @@ config SPEAR13XX_PCIE_GADGET
 	 entry will be created for that controller. User can use these
 	 sysfs node to configure PCIe EP as per his requirements.
 
-config TI_DAC7512
-	tristate "Texas Instruments DAC7512"
-	depends on SPI && SYSFS
-	help
-	  If you say yes here you get support for the Texas Instruments
-	  DAC7512 16-bit digital-to-analog converter.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called ti_dac7512.
-
 config VMWARE_BALLOON
 	tristate "VMware Balloon Driver"
 	depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_ISL29020)		+= isl29020.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/

diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c