Merge tag 'for-net-next-2022-07-22' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add support for IM Networks PID 0x3568
 - Add support for BCM4349B1
 - Add support for CYW55572
 - Add support for MT7922 VID/PID 0489/e0e2
 - Add support for Realtek RTL8852C
 - Initial support for Isochronous Channels/ISO sockets
 - Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING quirk

* tag 'for-net-next-2022-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (58 commits)
  Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet
  Bluetooth: btusb: Add support for ISO packets
  Bluetooth: ISO: Add broadcast support
  Bluetooth: Add initial implementation of BIS connections
  Bluetooth: Add BTPROTO_ISO socket type
  Bluetooth: Add initial implementation of CIS connections
  Bluetooth: hci_core: Introduce hci_recv_event_data
  Bluetooth: Convert delayed discov_off to hci_sync
  Bluetooth: Remove update_scan hci_request dependancy
  Bluetooth: Remove dead code from hci_request.c
  Bluetooth: btrtl: Fix typo in comment
  Bluetooth: MGMT: Fix holding hci_conn reference while command is queued
  Bluetooth: mgmt: Fix using hci_conn_abort
  Bluetooth: Use bt_status to convert from errno
  Bluetooth: Add bt_status
  Bluetooth: hci_sync: Split hci_dev_open_sync
  Bluetooth: hci_sync: Refactor remove Adv Monitor
  Bluetooth: hci_sync: Refactor add Adv Monitor
  Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING
  Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR
  ...
====================

Link: https://lore.kernel.org/r/20220723002232.964796-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml

@@ -23,6 +23,8 @@ properties:
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
+      - brcm,bcm4349-bt
+      - infineon,cyw55572-bt
 
   shutdown-gpios:
     maxItems: 1
@@ -92,6 +94,13 @@ properties:
        pcm-sync-mode: slave, master
        pcm-clock-mode: slave, master
 
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
   interrupts:
     items:
       - description: Handle to the line HOST_WAKE used to wake
@@ -108,6 +117,22 @@ properties:
 required:
   - compatible
 
+dependencies:
+  brcm,requires-autobaud-mode: [ 'shutdown-gpios' ]
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - brcm,bcm20702a1
+            - brcm,bcm4329-bt
+            - brcm,bcm4330-bt
+then:
+  properties:
+    reset-gpios: false
+
 additionalProperties: false
 
 examples:

drivers/bluetooth/btbcm.c

@@ -403,6 +403,13 @@ static int btbcm_read_info(struct hci_dev *hdev)
 	bt_dev_info(hdev, "BCM: chip id %u", skb->data[1]);
 	kfree_skb(skb);
 
+	return 0;
+}
+
+static int btbcm_print_controller_features(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
 	/* Read Controller Features */
 	skb = btbcm_read_controller_features(hdev);
 	if (IS_ERR(skb))
@@ -454,6 +461,8 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x6606, "BCM4345C5"	},	/* 003.006.006 */
 	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
 	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
+	{ 0x420d, "BCM4349B1"	},	/* 002.002.013 */
+	{ 0x420e, "BCM4349B1"	},	/* 002.002.014 */
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
 	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
@@ -514,7 +523,7 @@ static const char *btbcm_get_board_name(struct device *dev)
 #endif
 }
 
-int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
 {
 	u16 subver, rev, pid, vid;
 	struct sk_buff *skb;
@@ -551,9 +560,16 @@ int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
 		if (err)
 			return err;
 	}
-	err = btbcm_print_local_name(hdev);
-	if (err)
-		return err;
+
+	if (!use_autobaud_mode) {
+		err = btbcm_print_controller_features(hdev);
+		if (err)
+			return err;
+
+		err = btbcm_print_local_name(hdev);
+		if (err)
+			return err;
+	}
 
 	bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table :
 						    bcm_uart_subver_table;
@@ -636,13 +652,13 @@ int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
 }
 EXPORT_SYMBOL_GPL(btbcm_initialize);
 
-int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done)
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
 {
 	int err;
 
 	/* Re-initialize if necessary */
 	if (*fw_load_done) {
-		err = btbcm_initialize(hdev, fw_load_done);
+		err = btbcm_initialize(hdev, fw_load_done, use_autobaud_mode);
 		if (err)
 			return err;
 	}
@@ -658,15 +674,16 @@ EXPORT_SYMBOL_GPL(btbcm_finalize);
 int btbcm_setup_patchram(struct hci_dev *hdev)
 {
 	bool fw_load_done = false;
+	bool use_autobaud_mode = false;
 	int err;
 
 	/* Initialize */
-	err = btbcm_initialize(hdev, &fw_load_done);
+	err = btbcm_initialize(hdev, &fw_load_done, use_autobaud_mode);
 	if (err)
 		return err;
 
 	/* Re-initialize after loading Patch */
-	return btbcm_finalize(hdev, &fw_load_done);
+	return btbcm_finalize(hdev, &fw_load_done, use_autobaud_mode);
 }
 EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
 

drivers/bluetooth/btbcm.h

@@ -62,8 +62,8 @@ int btbcm_write_pcm_int_params(struct hci_dev *hdev,
 int btbcm_setup_patchram(struct hci_dev *hdev);
 int btbcm_setup_apple(struct hci_dev *hdev);
 
-int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done);
-int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done);
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode);
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode);
 
 #else
 
@@ -104,12 +104,12 @@ static inline int btbcm_setup_apple(struct hci_dev *hdev)
 	return 0;
 }
 
-static inline int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done)
+static inline int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
 {
 	return 0;
 }
 
-static inline int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done)
+static inline int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
 {
 	return 0;
 }

drivers/bluetooth/btmtksdio.c

@@ -1282,6 +1282,13 @@ static void btmtksdio_cmd_timeout(struct hci_dev *hdev)
 	hci_reset_dev(hdev);
 }
 
+static bool btmtksdio_sdio_inband_wakeup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	return device_may_wakeup(bdev->dev);
+}
+
 static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
 {
 	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
@@ -1349,6 +1356,14 @@ static int btmtksdio_probe(struct sdio_func *func,
 	hdev->shutdown = btmtksdio_shutdown;
 	hdev->send     = btmtksdio_send_frame;
 	hdev->wakeup   = btmtksdio_sdio_wakeup;
+	/*
+	 * If SDIO controller supports wake on Bluetooth, sending a wakeon
+	 * command is not necessary.
+	 */
+	if (device_can_wakeup(func->card->host->parent))
+		hdev->wakeup = btmtksdio_sdio_inband_wakeup;
+	else
+		hdev->wakeup = btmtksdio_sdio_wakeup;
 	hdev->set_bdaddr = btmtk_set_bdaddr;
 
 	SET_HCIDEV_DEV(hdev, &func->dev);

drivers/bluetooth/btrtl.c

@@ -330,7 +330,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 	/* Loop from the end of the firmware parsing instructions, until
 	 * we find an instruction that identifies the "project ID" for the
 	 * hardware supported by this firwmare file.
-	 * Once we have that, we double-check that that project_id is suitable
+	 * Once we have that, we double-check that project_id is suitable
 	 * for the hardware we are working with.
 	 */
 	while (fwptr >= btrtl_dev->fw_data + (sizeof(*epatch_info) + 3)) {

drivers/bluetooth/btusb.c

@@ -427,6 +427,18 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Realtek 8852CE Bluetooth devices */
+	{ USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cb8, 0xc558), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3587), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
 	  .driver_info = BTUSB_REALTEK },
@@ -477,6 +489,12 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e2), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Additional Realtek 8723AE Bluetooth devices */
 	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
@@ -893,11 +911,21 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
 		hci_skb_expect(skb) -= len;
 
 		if (skb->len == HCI_ACL_HDR_SIZE) {
+			__u16 handle = __le16_to_cpu(hci_acl_hdr(skb)->handle);
 			__le16 dlen = hci_acl_hdr(skb)->dlen;
+			__u8 type;
 
 			/* Complete ACL header */
 			hci_skb_expect(skb) = __le16_to_cpu(dlen);
 
+			/* Detect if ISO packet has been sent over bulk */
+			if (hci_conn_num(data->hdev, ISO_LINK)) {
+				type = hci_conn_lookup_type(data->hdev,
+							    hci_handle(handle));
+				if (type == ISO_LINK)
+					hci_skb_pkt_type(skb) = HCI_ISODATA_PKT;
+			}
+
 			if (skb_tailroom(skb) < hci_skb_expect(skb)) {
 				kfree_skb(skb);
 				skb = NULL;
@@ -1762,6 +1790,13 @@ static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 
 		hdev->stat.sco_tx++;
 		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
 	}
 
 	return -EILSEQ;
@@ -2069,7 +2104,6 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 		 * without these the controller will lock up.
 		 */
 		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
-		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
 		set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
 		set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
 
@@ -2255,6 +2289,13 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 
 		hdev->stat.sco_tx++;
 		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
 	}
 
 	return -EILSEQ;
@@ -3352,7 +3393,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 	 * work with the likes of HSP/HFP mSBC.
 	 */
 	set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
-	set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
 
 	return 0;
 }
@@ -3795,6 +3835,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->manufacturer = 70;
 		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
 		hdev->set_bdaddr = btmtk_set_bdaddr;
+		set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 		data->recv_acl = btusb_recv_acl_mtk;
 	}