Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts, no adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

.mailmap

@@ -72,6 +72,8 @@ Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andrzej Hajda <andrzej.hajda@intel.com> <a.hajda@samsung.com>
 André Almeida <andrealmeid@igalia.com> <andrealmeid@collabora.com>
 Andy Adamson <andros@citi.umich.edu>
+Andy Shevchenko <andy@kernel.org> <andy@smile.org.ua>
+Andy Shevchenko <andy@kernel.org> <ext-andriy.shevchenko@nokia.com>
 Anilkumar Kolli <quic_akolli@quicinc.com> <akolli@codeaurora.org>
 Anirudh Ghayal <quic_aghayal@quicinc.com> <aghayal@codeaurora.org>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
@@ -217,6 +219,7 @@ Geliang Tang <geliang@kernel.org> <geliang.tang@suse.com>
 Geliang Tang <geliang@kernel.org> <geliangtang@xiaomi.com>
 Geliang Tang <geliang@kernel.org> <geliangtang@gmail.com>
 Geliang Tang <geliang@kernel.org> <geliangtang@163.com>
+Geliang Tang <geliang@kernel.org> <tanggeliang@kylinos.cn>
 Georgi Djakov <djakov@kernel.org> <georgi.djakov@linaro.org>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>

Documentation/admin-guide/mm/transhuge.rst

@@ -467,11 +467,11 @@ anon_fault_fallback_charge
 	instead falls back to using huge pages with lower orders or
 	small pages even though the allocation was successful.
 
-anon_swpout
+swpout
 	is incremented every time a huge page is swapped out in one
 	piece without splitting.
 
-anon_swpout_fallback
+swpout_fallback
 	is incremented if a huge page has to be split before swapout.
 	Usually because failed to allocate some continuous swap space
 	for the huge page.

Documentation/cdrom/cdrom-standard.rst

@@ -217,7 +217,7 @@ current *struct* is::
 		int (*media_changed)(struct cdrom_device_info *, int);
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
-		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, unsigned long);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -396,7 +396,7 @@ action need be taken, and the return value should be 0.
 
 ::
 
-	int select_speed(struct cdrom_device_info *cdi, int speed)
+	int select_speed(struct cdrom_device_info *cdi, unsigned long speed)
 
 Some CD-ROM drives are capable of changing their head-speed. There
 are several reasons for changing the speed of a CD-ROM drive. Badly

Documentation/devicetree/bindings/input/elan,ekth6915.yaml

@@ -18,9 +18,12 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ekth6915
-      - ilitek,ili2901
+    oneOf:
+      - items:
+          - enum:
+              - elan,ekth5015m
+          - const: elan,ekth6915
+      - const: elan,ekth6915
 
   reg:
     const: 0x10
@@ -33,6 +36,12 @@ properties:
   reset-gpios:
     description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
 
+  no-reset-on-power-off:
+    type: boolean
+    description:
+      Reset line is wired so that it can (and should) be left deasserted when
+      the power supply is off.
+
   vcc33-supply:
     description: The 3.3V supply to the touchscreen.
 
@@ -58,8 +67,8 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      ap_ts: touchscreen@10 {
-        compatible = "elan,ekth6915";
+      touchscreen@10 {
+        compatible = "elan,ekth5015m", "elan,ekth6915";
         reg = <0x10>;
 
         interrupt-parent = <&tlmm>;

Documentation/devicetree/bindings/input/ilitek,ili2901.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+  - Jiri Kosina <jkosina@suse.com>
+
+description:
+  Supports the Ilitek ILI2901 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2901
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@41 {
+        compatible = "ilitek,ili2901";
+        reg = <0x41>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };

Documentation/kbuild/kconfig-language.rst

@@ -150,6 +150,12 @@ applicable everywhere (see syntax).
 	That will limit the usefulness but on the other hand avoid
 	the illegal configurations all over.
 
+	If "select" <symbol> is followed by "if" <expr>, <symbol> will be
+	selected by the logical AND of the value of the current menu symbol
+	and <expr>. This means, the lower limit can be downgraded due to the
+	presence of "if" <expr>. This behavior may seem weird, but we rely on
+	it. (The future of this behavior is undecided.)
+
 - weak reverse dependencies: "imply" <symbol> ["if" <expr>]
 
   This is similar to "select" as it enforces a lower limit on another
@@ -184,7 +190,7 @@ applicable everywhere (see syntax).
   ability to hook into a secondary subsystem while allowing the user to
   configure that subsystem out without also having to unset these drivers.
 
-  Note: If the combination of FOO=y and BAR=m causes a link error,
+  Note: If the combination of FOO=y and BAZ=m causes a link error,
   you can guard the function call with IS_REACHABLE()::
 
 	foo_init()
@@ -202,6 +208,10 @@ applicable everywhere (see syntax).
 	imply BAR
 	imply BAZ
 
+  Note: If "imply" <symbol> is followed by "if" <expr>, the default of <symbol>
+  will be the logical AND of the value of the current menu symbol and <expr>.
+  (The future of this behavior is undecided.)
+
 - limiting menu display: "visible if" <expr>
 
   This attribute is only applicable to menu blocks, if the condition is

Documentation/userspace-api/media/v4l/dev-subdev.rst

@@ -582,7 +582,7 @@ depending on the hardware. In all cases, however, only routes that have the
 Devices generating the streams may allow enabling and disabling some of the
 routes or have a fixed routing configuration. If the routes can be disabled, not
 declaring the routes (or declaring them without
-``VIDIOC_SUBDEV_STREAM_FL_ACTIVE`` flag set) in ``VIDIOC_SUBDEV_S_ROUTING`` will
+``V4L2_SUBDEV_STREAM_FL_ACTIVE`` flag set) in ``VIDIOC_SUBDEV_S_ROUTING`` will
 disable the routes. ``VIDIOC_SUBDEV_S_ROUTING`` will still return such routes
 back to the user in the routes array, with the ``V4L2_SUBDEV_STREAM_FL_ACTIVE``
 flag unset.

MAINTAINERS

@@ -15825,7 +15825,7 @@ F:	drivers/nfc/virtual_ncidev.c
 F:	tools/testing/selftests/nci/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <trond.myklebust@hammerspace.com>
+M:	Trond Myklebust <trondmy@kernel.org>
 M:	Anna Schumaker <anna@kernel.org>
 L:	linux-nfs@vger.kernel.org
 S:	Maintained

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Baby Opossum Posse
 
 # *DOCUMENTATION*

arch/arm/kernel/ftrace.c

@@ -232,11 +232,24 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	unsigned long old;
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+err_out:
 		return;
 
 	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) {
-		/* FP points one word below parent's top of stack */
-		frame_pointer += 4;
+		/*
+		 * Usually, the stack frames are contiguous in memory but cases
+		 * have been observed where the next stack frame does not live
+		 * at 'frame_pointer + 4' as this code used to assume.
+		 *
+		 * Instead, dereference the field in the stack frame that
+		 * stores the SP of the calling frame: to avoid unbounded
+		 * recursion, this cannot involve any ftrace instrumented
+		 * functions, so use the __get_kernel_nofault() primitive
+		 * directly.
+		 */
+		__get_kernel_nofault(&frame_pointer,
+				     (unsigned long *)(frame_pointer - 8),
+				     unsigned long, err_out);
 	} else {
 		struct stackframe frame = {
 			.fp = frame_pointer,

arch/arm64/include/asm/io.h

@@ -153,8 +153,9 @@ extern void __memset_io(volatile void __iomem *, int, size_t);
  * emit the large TLP from the CPU.
  */
 
-static inline void __const_memcpy_toio_aligned32(volatile u32 __iomem *to,
-						 const u32 *from, size_t count)
+static __always_inline void
+__const_memcpy_toio_aligned32(volatile u32 __iomem *to, const u32 *from,
+			      size_t count)
 {
 	switch (count) {
 	case 8:
@@ -196,24 +197,22 @@ static inline void __const_memcpy_toio_aligned32(volatile u32 __iomem *to,
 
 void __iowrite32_copy_full(void __iomem *to, const void *from, size_t count);
 
-static inline void __const_iowrite32_copy(void __iomem *to, const void *from,
-					  size_t count)
+static __always_inline void
+__iowrite32_copy(void __iomem *to, const void *from, size_t count)
 {
-	if (count == 8 || count == 4 || count == 2 || count == 1) {
+	if (__builtin_constant_p(count) &&
+	    (count == 8 || count == 4 || count == 2 || count == 1)) {
 		__const_memcpy_toio_aligned32(to, from, count);
 		dgh();
 	} else {
 		__iowrite32_copy_full(to, from, count);
 	}
 }
+#define __iowrite32_copy __iowrite32_copy
 
-#define __iowrite32_copy(to, from, count)                  \
-	(__builtin_constant_p(count) ?                     \
-		 __const_iowrite32_copy(to, from, count) : \
-		 __iowrite32_copy_full(to, from, count))
-
-static inline void __const_memcpy_toio_aligned64(volatile u64 __iomem *to,
-						 const u64 *from, size_t count)
+static __always_inline void
+__const_memcpy_toio_aligned64(volatile u64 __iomem *to, const u64 *from,
+			      size_t count)
 {
 	switch (count) {
 	case 8:
@@ -255,21 +254,18 @@ static inline void __const_memcpy_toio_aligned64(volatile u64 __iomem *to,
 
 void __iowrite64_copy_full(void __iomem *to, const void *from, size_t count);
 
-static inline void __const_iowrite64_copy(void __iomem *to, const void *from,
-					  size_t count)
+static __always_inline void
+__iowrite64_copy(void __iomem *to, const void *from, size_t count)
 {
-	if (count == 8 || count == 4 || count == 2 || count == 1) {
+	if (__builtin_constant_p(count) &&
+	    (count == 8 || count == 4 || count == 2 || count == 1)) {
 		__const_memcpy_toio_aligned64(to, from, count);
 		dgh();
 	} else {
 		__iowrite64_copy_full(to, from, count);
 	}
 }
-
-#define __iowrite64_copy(to, from, count)                  \
-	(__builtin_constant_p(count) ?                     \
-		 __const_iowrite64_copy(to, from, count) : \
-		 __iowrite64_copy_full(to, from, count))
+#define __iowrite64_copy __iowrite64_copy
 
 /*
  * I/O memory mapping functions.

arch/arm64/kernel/armv8_deprecated.c

@@ -462,6 +462,9 @@ static int run_all_insn_set_hw_mode(unsigned int cpu)
 	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
 		struct insn_emulation *insn = insn_emulations[i];
 		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->status == INSN_UNAVAILABLE)
+			continue;
+
 		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
 			pr_warn("CPU[%u] cannot support the emulation of %s",
 				cpu, insn->name);

arch/arm64/mm/contpte.c

@@ -376,7 +376,7 @@ void contpte_clear_young_dirty_ptes(struct vm_area_struct *vma,
 	 * clearing access/dirty for the whole block.
 	 */
 	unsigned long start = addr;
-	unsigned long end = start + nr;
+	unsigned long end = start + nr * PAGE_SIZE;
 
 	if (pte_cont(__ptep_get(ptep + nr - 1)))
 		end = ALIGN(end, CONT_PTE_SIZE);
@@ -386,7 +386,7 @@ void contpte_clear_young_dirty_ptes(struct vm_area_struct *vma,
 		ptep = contpte_align_down(ptep);
 	}
 
-	__clear_young_dirty_ptes(vma, start, ptep, end - start, flags);
+	__clear_young_dirty_ptes(vma, start, ptep, (end - start) / PAGE_SIZE, flags);
 }
 EXPORT_SYMBOL_GPL(contpte_clear_young_dirty_ptes);
 

arch/riscv/mm/fault.c

@@ -293,8 +293,8 @@ void handle_page_fault(struct pt_regs *regs)
 	if (unlikely(access_error(cause, vma))) {
 		vma_end_read(vma);
 		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
-		tsk->thread.bad_cause = SEGV_ACCERR;
-		bad_area_nosemaphore(regs, code, addr);
+		tsk->thread.bad_cause = cause;
+		bad_area_nosemaphore(regs, SEGV_ACCERR, addr);
 		return;
 	}
 

arch/riscv/mm/init.c

@@ -250,18 +250,19 @@ static void __init setup_bootmem(void)
 		kernel_map.va_pa_offset = PAGE_OFFSET - phys_ram_base;
 
 	/*
-	 * memblock allocator is not aware of the fact that last 4K bytes of
-	 * the addressable memory can not be mapped because of IS_ERR_VALUE
-	 * macro. Make sure that last 4k bytes are not usable by memblock
-	 * if end of dram is equal to maximum addressable memory.  For 64-bit
-	 * kernel, this problem can't happen here as the end of the virtual
-	 * address space is occupied by the kernel mapping then this check must
-	 * be done as soon as the kernel mapping base address is determined.
+	 * Reserve physical address space that would be mapped to virtual
+	 * addresses greater than (void *)(-PAGE_SIZE) because:
+	 *  - This memory would overlap with ERR_PTR
+	 *  - This memory belongs to high memory, which is not supported
+	 *
+	 * This is not applicable to 64-bit kernel, because virtual addresses
+	 * after (void *)(-PAGE_SIZE) are not linearly mapped: they are
+	 * occupied by kernel mapping. Also it is unrealistic for high memory
+	 * to exist on 64-bit platforms.
 	 */
 	if (!IS_ENABLED(CONFIG_64BIT)) {
-		max_mapped_addr = __pa(~(ulong)0);
-		if (max_mapped_addr == (phys_ram_end - 1))
-			memblock_set_current_limit(max_mapped_addr - 4096);
+		max_mapped_addr = __va_to_pa_nodebug(-PAGE_SIZE);
+		memblock_reserve(max_mapped_addr, (phys_addr_t)-max_mapped_addr);
 	}
 
 	min_low_pfn = PFN_UP(phys_ram_base);