Merge remote-tracking branches 'regulator/fix/88pm800', 'regulator/fi…

…x/max8973', 'regulator/fix/s2mps11' and 'regulator/fix/supply' into regulator-linus

drivers/regulator/88pm800.c

@@ -130,7 +130,7 @@ struct pm800_regulators {
 		.owner	= THIS_MODULE,					\
 		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
 		.vsel_reg	= PM800_##vreg##_VOUT,			\
-		.vsel_mask	= 0x1f,					\
+		.vsel_mask	= 0xf,					\
 		.enable_reg	= PM800_##ereg,				\
 		.enable_mask	= 1 << (ebit),				\
 		.volt_table	= ldo_volt_table,			\

drivers/regulator/core.c

@@ -109,6 +109,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  struct device *dev,
 					  const char *supply_name);
+static void _regulator_put(struct regulator *regulator);
 
 static const char *rdev_get_name(struct regulator_dev *rdev)
 {
@@ -1105,6 +1106,9 @@ static int set_supply(struct regulator_dev *rdev,
 
 	rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
 
+	if (!try_module_get(supply_rdev->owner))
+		return -ENODEV;
+
 	rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
 	if (rdev->supply == NULL) {
 		err = -ENOMEM;
@@ -1402,8 +1406,11 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	/* Cascade always-on state to supply */
 	if (_regulator_is_enabled(rdev)) {
 		ret = regulator_enable(rdev->supply);
-		if (ret < 0)
+		if (ret < 0) {
+			if (rdev->supply)
+				_regulator_put(rdev->supply);
 			return ret;
+		}
 	}
 
 	return 0;

drivers/regulator/max8973-regulator.c

@@ -450,7 +450,7 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
 		pdata->control_flags  |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
 
 	if (of_property_read_bool(np, "maxim,enable-bias-control"))
-		pdata->control_flags  |= MAX8973_BIAS_ENABLE;
+		pdata->control_flags  |= MAX8973_CONTROL_BIAS_ENABLE;
 
 	return pdata;
 }

drivers/regulator/s2mps11.c

@@ -34,6 +34,8 @@
 #include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 
+/* The highest number of possible regulators for supported devices. */
+#define S2MPS_REGULATOR_MAX		S2MPS13_REGULATOR_MAX
 struct s2mps11_info {
 	unsigned int rdev_num;
 	int ramp_delay2;
@@ -49,7 +51,7 @@ struct s2mps11_info {
 	 * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
 	 * the suspend mode was enabled.
 	 */
-	unsigned long long s2mps14_suspend_state:50;
+	DECLARE_BITMAP(suspend_state, S2MPS_REGULATOR_MAX);
 
 	/* Array of size rdev_num with GPIO-s for external sleep control */
 	int *ext_control_gpio;
@@ -500,15 +502,15 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 	switch (s2mps11->dev_type) {
 	case S2MPS13X:
 	case S2MPS14X:
-		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+		if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
 			val = S2MPS14_ENABLE_SUSPEND;
 		else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
 			val = S2MPS14_ENABLE_EXT_CONTROL;
 		else
 			val = rdev->desc->enable_mask;
 		break;
 	case S2MPU02:
-		if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+		if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
 			val = S2MPU02_ENABLE_SUSPEND;
 		else
 			val = rdev->desc->enable_mask;
@@ -562,7 +564,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 	if (ret < 0)
 		return ret;
 
-	s2mps11->s2mps14_suspend_state |= (1 << rdev_get_id(rdev));
+	set_bit(rdev_get_id(rdev), s2mps11->suspend_state);
 	/*
 	 * Don't enable suspend mode if regulator is already disabled because
 	 * this would effectively for a short time turn on the regulator after
@@ -960,18 +962,22 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	case S2MPS11X:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
 		regulators = s2mps11_regulators;
+		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
 		break;
 	case S2MPS13X:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators);
 		regulators = s2mps13_regulators;
+		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
 		break;
 	case S2MPS14X:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
 		regulators = s2mps14_regulators;
+		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
 		break;
 	case S2MPU02:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
 		regulators = s2mpu02_regulators;
+		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid device type: %u\n",