Skip to content

Commit

Permalink
mtd: omap2: fix some typos in comments
Browse files Browse the repository at this point in the history
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
  • Loading branch information
Peter Meerwald authored and David Woodhouse committed Sep 29, 2012
1 parent bf7a01b commit 4cacbe2
Showing 1 changed file with 5 additions and 5 deletions.
10 changes: 5 additions & 5 deletions drivers/mtd/nand/omap2.c
Original file line number Diff line number Diff line change
Expand Up @@ -347,7 +347,7 @@ static void omap_nand_dma_callback(void *data)
}

/*
* omap_nand_dma_transfer: configer and start dma transfer
* omap_nand_dma_transfer: configure and start dma transfer
* @mtd: MTD device structure
* @addr: virtual address in RAM of source/destination
* @len: number of data bytes to be transferred
Expand Down Expand Up @@ -463,7 +463,7 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
}

/*
* omap_nand_irq - GMPC irq handler
* omap_nand_irq - GPMC irq handler
* @this_irq: gpmc irq number
* @dev: omap_nand_info structure pointer is passed here
*/
Expand Down Expand Up @@ -1205,8 +1205,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)

/*
* If RDY/BSY line is connected to OMAP then use the omap ready
* funcrtion and the generic nand_wait function which reads the status
* register after monitoring the RDY/BSY line.Otherwise use a standard
* function and the generic nand_wait function which reads the status
* register after monitoring the RDY/BSY line. Otherwise use a standard
* chip delay which is slightly more than tR (AC Timing) of the NAND
* device and read status register until you get a failure or success
*/
Expand Down Expand Up @@ -1287,7 +1287,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)

info->nand.verify_buf = omap_verify_buf;

/* selsect the ecc type */
/* select the ecc type */
if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
info->nand.ecc.mode = NAND_ECC_SOFT;
else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
Expand Down

0 comments on commit 4cacbe2

Please sign in to comment.