Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "From the irqchip departement you get:

   - regression fix for omap-intc

   - regression fix for atmel-aic-common

   - functional correctness fix for hip04

   - type mismatch fix for gic-v3-its

   - proper error pointer check for mtd-sysirq

  Mostly one and two liners except for the omap regression fix which is
  slightly larger than desired"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
  irqchip: omap-intc: Fix legacy DMA regression
  irqchip: gic-v3-its: Fix use of max with decimal constant
  irqchip: hip04: Initialize hip04_cpu_map to 0xffff
  irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check

drivers/irqchip/irq-atmel-aic-common.c

@@ -28,7 +28,7 @@
 #define AT91_AIC_IRQ_MIN_PRIORITY	0
 #define AT91_AIC_IRQ_MAX_PRIORITY	7
 
-#define AT91_AIC_SRCTYPE		GENMASK(7, 6)
+#define AT91_AIC_SRCTYPE		GENMASK(6, 5)
 #define AT91_AIC_SRCTYPE_LOW		(0 << 5)
 #define AT91_AIC_SRCTYPE_FALLING	(1 << 5)
 #define AT91_AIC_SRCTYPE_HIGH		(2 << 5)
@@ -74,7 +74,7 @@ int aic_common_set_type(struct irq_data *d, unsigned type, unsigned *val)
 		return -EINVAL;
 	}
 
-	*val &= AT91_AIC_SRCTYPE;
+	*val &= ~AT91_AIC_SRCTYPE;
 	*val |= aic_type;
 
 	return 0;

drivers/irqchip/irq-gic-v3-its.c

@@ -1053,7 +1053,7 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
 	 * of two entries. No, the architecture doesn't let you
 	 * express an ITT with a single entry.
 	 */
-	nr_ites = max(2, roundup_pow_of_two(nvecs));
+	nr_ites = max(2UL, roundup_pow_of_two(nvecs));
 	sz = nr_ites * its->ite_size;
 	sz = max(sz, ITS_ITT_ALIGN) + ITS_ITT_ALIGN - 1;
 	itt = kmalloc(sz, GFP_KERNEL);

drivers/irqchip/irq-hip04.c

@@ -381,7 +381,7 @@ hip04_of_init(struct device_node *node, struct device_node *parent)
 	 * It will be refined as each CPU probes its ID.
 	 */
 	for (i = 0; i < NR_HIP04_CPU_IF; i++)
-		hip04_cpu_map[i] = 0xff;
+		hip04_cpu_map[i] = 0xffff;
 
 	/*
 	 * Find out how many interrupts are supported.

drivers/irqchip/irq-mtk-sysirq.c

@@ -137,9 +137,9 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		return -ENOMEM;
 
 	chip_data->intpol_base = of_io_request_and_map(node, 0, "intpol");
-	if (!chip_data->intpol_base) {
+	if (IS_ERR(chip_data->intpol_base)) {
 		pr_err("mtk_sysirq: unable to map sysirq register\n");
-		ret = -ENOMEM;
+		ret = PTR_ERR(chip_data->intpol_base);
 		goto out_free;
 	}
 

drivers/irqchip/irq-omap-intc.c

@@ -263,7 +263,7 @@ static int __init omap_init_irq_of(struct device_node *node)
 	return ret;
 }
 
-static int __init omap_init_irq_legacy(u32 base)
+static int __init omap_init_irq_legacy(u32 base, struct device_node *node)
 {
 	int j, irq_base;
 
@@ -277,7 +277,7 @@ static int __init omap_init_irq_legacy(u32 base)
 		irq_base = 0;
 	}
 
-	domain = irq_domain_add_legacy(NULL, omap_nr_irqs, irq_base, 0,
+	domain = irq_domain_add_legacy(node, omap_nr_irqs, irq_base, 0,
 			&irq_domain_simple_ops, NULL);
 
 	omap_irq_soft_reset();
@@ -301,10 +301,26 @@ static int __init omap_init_irq(u32 base, struct device_node *node)
 {
 	int ret;
 
-	if (node)
+	/*
+	 * FIXME legacy OMAP DMA driver sitting under arch/arm/plat-omap/dma.c
+	 * depends is still not ready for linear IRQ domains; because of that
+	 * we need to temporarily "blacklist" OMAP2 and OMAP3 devices from using
+	 * linear IRQ Domain until that driver is finally fixed.
+	 */
+	if (of_device_is_compatible(node, "ti,omap2-intc") ||
+			of_device_is_compatible(node, "ti,omap3-intc")) {
+		struct resource res;
+
+		if (of_address_to_resource(node, 0, &res))
+			return -ENOMEM;
+
+		base = res.start;
+		ret = omap_init_irq_legacy(base, node);
+	} else if (node) {
 		ret = omap_init_irq_of(node);
-	else
-		ret = omap_init_irq_legacy(base);
+	} else {
+		ret = omap_init_irq_legacy(base, NULL);
+	}
 
 	if (ret == 0)
 		omap_irq_enable_protection();