drm/bridge: tc358767: fix single lane configuration

PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use.

Set PHY_2LANE only when 2 lanes are used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com

drivers/gpu/drm/bridge/tc358767.c

@@ -543,6 +543,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	unsigned long rate;
 	u32 value;
 	int ret;
+	u32 dp_phy_ctrl;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -567,7 +568,10 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
 
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN);
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
@@ -860,7 +864,9 @@ static int tc_main_link_setup(struct tc_data *tc)
 	tc_write(SYS_PLLPARAM, value);
 
 	/* Setup Main Link */
-	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN |  PHY_M0_EN;
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 	msleep(100);