Merge tag 'fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.7-rc2

DWC3 learns how to properly set maxpacket limit and got a fix for a
request completion bug. The raw gadget got a fix for
copy_to/from_user() checks. Atmel got an improvement on vbus
disconnect handling.

We're also adding support for another SoC to the Renesas DRD driver.

* tag 'fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: raw-gadget: Fix copy_to/from_user() checks
  usb: raw-gadget: fix raw_event_queue_fetch locking
  usb: gadget: udc: atmel: Fix vbus disconnect handling
  usb: dwc3: gadget: Fix request completion check
  usb: dwc3: gadget: Do link recovery for SS and SSP
  dt-bindings: usb: renesas,usb3-peri: add r8a77961 support
  dt-bindings: usb: renesas,usbhs: add r8a77961 support
  dt-bindings: usb: usb-xhci: add r8a77961 support
  docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file
  usb: dwc3: gadget: Properly set maxpacket limit
  usb: dwc3: Fix GTXFIFOSIZ.TXFDEP macro name
  usb: gadget: udc: bdc: Remove unnecessary NULL checks in bdc_req_complete

Documentation/devicetree/bindings/usb/qcom,dwc3.txt

@@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt    - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
 
 Example device nodes:
 

Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml

@@ -18,6 +18,7 @@ properties:
           - renesas,r8a774c0-usb3-peri # RZ/G2E
           - renesas,r8a7795-usb3-peri  # R-Car H3
           - renesas,r8a7796-usb3-peri  # R-Car M3-W
+          - renesas,r8a77961-usb3-peri # R-Car M3-W+
           - renesas,r8a77965-usb3-peri # R-Car M3-N
           - renesas,r8a77990-usb3-peri # R-Car E3
       - const: renesas,rcar-gen3-usb3-peri

Documentation/devicetree/bindings/usb/renesas,usbhs.yaml

@@ -40,6 +40,7 @@ properties:
               - renesas,usbhs-r8a774c0 # RZ/G2E
               - renesas,usbhs-r8a7795  # R-Car H3
               - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
               - renesas,usbhs-r8a77965 # R-Car M3-N
               - renesas,usbhs-r8a77990 # R-Car E3
               - renesas,usbhs-r8a77995 # R-Car D3

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -16,7 +16,8 @@ Required properties:
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
-    - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a7796" for r8a77960 SoC
+    - "renesas,xhci-r8a77961" for r8a77961 SoC
     - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,xhci-r8a77990" for r8a77990 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible

drivers/usb/dwc3/core.h

@@ -307,10 +307,14 @@
 
 /* Global TX Fifo Size Register */
 #define DWC31_GTXFIFOSIZ_TXFRAMNUM	BIT(15)		/* DWC_usb31 only */
-#define DWC31_GTXFIFOSIZ_TXFDEF(n)	((n) & 0x7fff)	/* DWC_usb31 only */
-#define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
+#define DWC31_GTXFIFOSIZ_TXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n)	((n) & 0xffff)
+
 /* Global Event Size Registers */
 #define DWC3_GEVNTSIZ_INTMASK		BIT(31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)

drivers/usb/dwc3/gadget.c

@@ -1728,7 +1728,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	u32			reg;
 
 	u8			link_state;
-	u8			speed;
 
 	/*
 	 * According to the Databook Remote wakeup request should
@@ -1738,16 +1737,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	 */
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
-	speed = reg & DWC3_DSTS_CONNECTSPD;
-	if ((speed == DWC3_DSTS_SUPERSPEED) ||
-	    (speed == DWC3_DSTS_SUPERSPEED_PLUS))
-		return 0;
-
 	link_state = DWC3_DSTS_USBLNKST(reg);
 
 	switch (link_state) {
+	case DWC3_LINK_STATE_RESET:
 	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
 	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+	case DWC3_LINK_STATE_RESUME:
 		break;
 	default:
 		return -EINVAL;
@@ -2227,7 +2223,6 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
 	int mdwidth;
-	int kbytes;
 	int size;
 
 	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
@@ -2236,24 +2231,24 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 
 	size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1));
 	if (dwc3_is_usb31(dwc))
-		size = DWC31_GTXFIFOSIZ_TXFDEF(size);
+		size = DWC31_GTXFIFOSIZ_TXFDEP(size);
 	else
-		size = DWC3_GTXFIFOSIZ_TXFDEF(size);
+		size = DWC3_GTXFIFOSIZ_TXFDEP(size);
 
 	/* FIFO Depth is in MDWDITH bytes. Multiply */
 	size *= mdwidth;
 
-	kbytes = size / 1024;
-	if (kbytes == 0)
-		kbytes = 1;
-
 	/*
-	 * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for
-	 * internal overhead. We don't really know how these are used,
-	 * but documentation say it exists.
+	 * To meet performance requirement, a minimum TxFIFO size of 3x
+	 * MaxPacketSize is recommended for endpoints that support burst and a
+	 * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
+	 * support burst. Use those numbers and we can calculate the max packet
+	 * limit as below.
 	 */
-	size -= mdwidth * (kbytes + 1);
-	size /= kbytes;
+	if (dwc->maximum_speed >= USB_SPEED_SUPER)
+		size /= 3;
+	else
+		size /= 2;
 
 	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 
@@ -2271,8 +2266,39 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
+	int mdwidth;
+	int size;
+
+	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
 
-	usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
+	/* MDWIDTH is represented in bits, convert to bytes */
+	mdwidth /= 8;
+
+	/* All OUT endpoints share a single RxFIFO space */
+	size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+	if (dwc3_is_usb31(dwc))
+		size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+	else
+		size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+
+	/* FIFO depth is in MDWDITH bytes */
+	size *= mdwidth;
+
+	/*
+	 * To meet performance requirement, a minimum recommended RxFIFO size
+	 * is defined as follow:
+	 * RxFIFO size >= (3 x MaxPacketSize) +
+	 * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+	 *
+	 * Then calculate the max packet limit as below.
+	 */
+	size -= (3 * 8) + 16;
+	if (size < 0)
+		size = 0;
+	else
+		size /= 3;
+
+	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 	dep->endpoint.max_streams = 15;
 	dep->endpoint.ops = &dwc3_gadget_ep_ops;
 	list_add_tail(&dep->endpoint.ep_list,
@@ -2484,14 +2510,7 @@ static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep,
 
 static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
 {
-	/*
-	 * For OUT direction, host may send less than the setup
-	 * length. Return true for all OUT requests.
-	 */
-	if (!req->direction)
-		return true;
-
-	return req->request.actual == req->request.length;
+	return req->num_pending_sgs == 0;
 }
 
 static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
@@ -2515,8 +2534,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 
 	req->request.actual = req->request.length - req->remaining;
 
-	if (!dwc3_gadget_ep_request_completed(req) ||
-			req->num_pending_sgs) {
+	if (!dwc3_gadget_ep_request_completed(req)) {
 		__dwc3_gadget_kick_transfer(dep);
 		goto out;
 	}

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -1951,10 +1951,10 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 			usba_start(udc);
 		} else {
 			udc->suspended = false;
-			usba_stop(udc);
-
 			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
 		}
 		udc->vbus_prev = vbus;
 	}

drivers/usb/gadget/udc/bdc/bdc_ep.c

@@ -540,7 +540,7 @@ static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req,
 {
 	struct bdc *bdc = ep->bdc;
 
-	if (req == NULL  || &req->queue == NULL || &req->usb_req == NULL)
+	if (req == NULL)
 		return;
 
 	dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status);