Merge branch 'phy_check_downshift'

Heiner Kallweit says:

====================
net: phy: add and use phy_check_downshift

So far PHY drivers have to check whether a downshift occurred to be
able to notify the user. To make life of drivers authors a little bit
easier move the downshift notification to phylib. phy_check_downshift()
compares the highest mutually advertised speed with the actual value
of phydev->speed (typically read by the PHY driver from a
vendor-specific register) to detect a downshift.

v2: Add downshift hint to phy_print_status().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/aquantia_main.c

@@ -290,17 +290,6 @@ static int aqr_read_status(struct phy_device *phydev)
 	return genphy_c45_read_status(phydev);
 }
 
-static int aqr107_read_downshift_event(struct phy_device *phydev)
-{
-	int val;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS1);
-	if (val < 0)
-		return val;
-
-	return !!(val & MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT);
-}
-
 static int aqr107_read_rate(struct phy_device *phydev)
 {
 	int val;
@@ -377,13 +366,7 @@ static int aqr107_read_status(struct phy_device *phydev)
 		break;
 	}
 
-	val = aqr107_read_downshift_event(phydev);
-	if (val <= 0)
-		return val;
-
-	phydev_warn(phydev, "Downshift occurred! Cabling may be defective.\n");
-
-	/* Read downshifted rate from vendor register */
+	/* Read possibly downshifted rate from vendor register */
 	return aqr107_read_rate(phydev);
 }
 
@@ -506,9 +489,6 @@ static int aqr107_config_init(struct phy_device *phydev)
 	if (!ret)
 		aqr107_chip_info(phydev);
 
-	/* ensure that a latched downshift event is cleared */
-	aqr107_read_downshift_event(phydev);
-
 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
 }
 
@@ -533,9 +513,6 @@ static int aqcs109_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	/* ensure that a latched downshift event is cleared */
-	aqr107_read_downshift_event(phydev);
-
 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
 }
 

drivers/net/phy/marvell.c

@@ -867,21 +867,6 @@ static int m88e1011_set_tunable(struct phy_device *phydev,
 	}
 }
 
-static void m88e1011_link_change_notify(struct phy_device *phydev)
-{
-	int status;
-
-	if (phydev->state != PHY_RUNNING)
-		return;
-
-	/* we may be on fiber page currently */
-	status = phy_read_paged(phydev, MII_MARVELL_COPPER_PAGE,
-				MII_M1011_PHY_SSR);
-
-	if (status > 0 && status & MII_M1011_PHY_SSR_DOWNSHIFT)
-		phydev_warn(phydev, "Downshift occurred! Cabling may be defective.\n");
-}
-
 static int m88e1116r_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -2201,7 +2186,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1011_get_tunable,
 		.set_tunable = m88e1011_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1111,
@@ -2223,7 +2207,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1111_get_tunable,
 		.set_tunable = m88e1111_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1118,
@@ -2264,7 +2247,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1011_get_tunable,
 		.set_tunable = m88e1011_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1318S,
@@ -2308,7 +2290,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1111_get_tunable,
 		.set_tunable = m88e1111_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1149R,
@@ -2364,7 +2345,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1011_get_tunable,
 		.set_tunable = m88e1011_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1510,
@@ -2390,7 +2370,6 @@ static struct phy_driver marvell_drivers[] = {
 		.set_loopback = genphy_loopback,
 		.get_tunable = m88e1011_get_tunable,
 		.set_tunable = m88e1011_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1540,
@@ -2413,7 +2392,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1540_get_tunable,
 		.set_tunable = m88e1540_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1545,
@@ -2436,7 +2414,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1540_get_tunable,
 		.set_tunable = m88e1540_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E3016,
@@ -2479,7 +2456,6 @@ static struct phy_driver marvell_drivers[] = {
 		.get_stats = marvell_get_stats,
 		.get_tunable = m88e1540_get_tunable,
 		.set_tunable = m88e1540_set_tunable,
-		.link_change_notify = m88e1011_link_change_notify,
 	},
 };
 

drivers/net/phy/phy-core.c

@@ -329,6 +329,44 @@ void phy_resolve_aneg_linkmode(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
 
+/**
+ * phy_check_downshift - check whether downshift occurred
+ * @phydev: The phy_device struct
+ *
+ * Check whether a downshift to a lower speed occurred. If this should be the
+ * case warn the user.
+ * Prerequisite for detecting downshift is that PHY driver implements the
+ * read_status callback and sets phydev->speed to the actual link speed.
+ */
+void phy_check_downshift(struct phy_device *phydev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+	int i, speed = SPEED_UNKNOWN;
+
+	phydev->downshifted_rate = 0;
+
+	if (phydev->autoneg == AUTONEG_DISABLE ||
+	    phydev->speed == SPEED_UNKNOWN)
+		return;
+
+	linkmode_and(common, phydev->lp_advertising, phydev->advertising);
+
+	for (i = 0; i < ARRAY_SIZE(settings); i++)
+		if (test_bit(settings[i].bit, common)) {
+			speed = settings[i].speed;
+			break;
+		}
+
+	if (speed == SPEED_UNKNOWN || phydev->speed >= speed)
+		return;
+
+	phydev_warn(phydev, "Downshift occurred from negotiated speed %s to actual speed %s, check cabling!\n",
+		    phy_speed_to_str(speed), phy_speed_to_str(phydev->speed));
+
+	phydev->downshifted_rate = 1;
+}
+EXPORT_SYMBOL_GPL(phy_check_downshift);
+
 static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(common);

drivers/net/phy/phy.c

@@ -96,9 +96,10 @@ void phy_print_status(struct phy_device *phydev)
 {
 	if (phydev->link) {
 		netdev_info(phydev->attached_dev,
-			"Link is Up - %s/%s - flow control %s\n",
+			"Link is Up - %s/%s %s- flow control %s\n",
 			phy_speed_to_str(phydev->speed),
 			phy_duplex_to_str(phydev->duplex),
+			phydev->downshifted_rate ? "(downshifted) " : "",
 			phy_pause_str(phydev));
 	} else	{
 		netdev_info(phydev->attached_dev, "Link is Down\n");
@@ -507,6 +508,7 @@ static int phy_check_link_status(struct phy_device *phydev)
 		return err;
 
 	if (phydev->link && phydev->state != PHY_RUNNING) {
+		phy_check_downshift(phydev);
 		phydev->state = PHY_RUNNING;
 		phy_link_up(phydev);
 	} else if (!phydev->link && phydev->state != PHY_NOLINK) {

include/linux/phy.h

@@ -365,6 +365,7 @@ struct macsec_ops;
  * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus.
  * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
  * loopback_enabled: Set true if this phy has been loopbacked successfully.
+ * downshifted_rate: Set true if link speed has been downshifted.
  * state: state of the PHY for management purposes
  * dev_flags: Device-specific flags used by the PHY driver.
  * irq: IRQ number of the PHY's interrupt (-1 if none)
@@ -405,6 +406,7 @@ struct phy_device {
 	unsigned suspended_by_mdio_bus:1;
 	unsigned sysfs_links:1;
 	unsigned loopback_enabled:1;
+	unsigned downshifted_rate:1;
 
 	unsigned autoneg:1;
 	/* The most recently read link state */
@@ -698,6 +700,7 @@ static inline bool phy_is_started(struct phy_device *phydev)
 
 void phy_resolve_aneg_pause(struct phy_device *phydev);
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
+void phy_check_downshift(struct phy_device *phydev);
 
 /**
  * phy_read - Convenience function for reading a given PHY register