Merge branch 'for-greg' of git://gitorious.org/usb/usb into usb-next

* 'for-greg' of git://gitorious.org/usb/usb:
  usb: ehci-omap: Show fatal probing time errors to end user
  usb: musb: introduce api for dma code to check compatibility with usb request
  usb: musb: maintain three states for buffer mappings instead of two
  usb: musb: disable double buffering when it's broken
  usb: musb: hsdma: change back to use musb_read/writew
  usb: musb: core: fix IRQ check
  usb: musb: fix kernel panic during s2ram(v2)

drivers/usb/host/ehci-omap.c

@@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
 			dev_name(&pdev->dev));
 	if (!hcd) {
-		dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+		dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
 		ret = -ENOMEM;
 		goto err_create_hcd;
 	}
@@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	ret = omap_start_ehc(omap, hcd);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
 		goto err_start;
 	}
 
@@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
 	}
 

drivers/usb/musb/blackfin.c

@@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb)
 		musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
+	musb->double_buffer_not_ok = true;
 
 	return 0;
 }

drivers/usb/musb/musb_core.c

@@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
 
 static inline struct musb *dev_to_musb(struct device *dev)
 {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	/* usbcore insists dev->driver_data is a "struct hcd *" */
-	return hcd_to_musb(dev_get_drvdata(dev));
-#else
 	return dev_get_drvdata(dev);
-#endif
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev,
 	musb = kzalloc(sizeof *musb, GFP_KERNEL);
 	if (!musb)
 		return NULL;
-	dev_set_drvdata(dev, musb);
 
 #endif
-
+	dev_set_drvdata(dev, musb);
 	musb->mregs = mbase;
 	musb->ctrl_base = mbase;
 	musb->nIrq = -ENODEV;
@@ -2191,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev)
 	void __iomem	*base;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem || irq == 0)
+	if (!iomem || irq <= 0)
 		return -ENODEV;
 
 	base = ioremap(iomem->start, resource_size(iomem));

drivers/usb/musb/musb_core.h

@@ -488,6 +488,18 @@ struct musb {
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
+	/*
+	 * FIXME: Remove this flag.
+	 *
+	 * This is only added to allow Blackfin to work
+	 * with current driver. For some unknown reason
+	 * Blackfin doesn't work with double buffering
+	 * and that's enabled by default.
+	 *
+	 * We added this flag to forcefully disable double
+	 * buffering until we get it working.
+	 */
+	unsigned                double_buffer_not_ok:1 __deprecated;
 
 	u8			address;
 	u8			test_mode_nr;

drivers/usb/musb/musb_dma.h

@@ -169,6 +169,9 @@ struct dma_controller {
 							dma_addr_t dma_addr,
 							u32 length);
 	int			(*channel_abort)(struct dma_channel *);
+	int			(*is_compatible)(struct dma_channel *channel,
+							u16 maxpacket,
+							void *buf, u32 length);
 };
 
 /* called after channel_program(), may indicate a fault */

drivers/usb/musb/musb_gadget.c

@@ -92,11 +92,33 @@
 
 /* ----------------------------------------------------------------------- */
 
+#define is_buffer_mapped(req) (is_dma_capable() && \
+					(req->map_state != UN_MAPPED))
+
 /* Maps the buffer to dma  */
 
 static inline void map_dma_buffer(struct musb_request *request,
-				struct musb *musb)
+			struct musb *musb, struct musb_ep *musb_ep)
 {
+	int compatible = true;
+	struct dma_controller *dma = musb->dma_controller;
+
+	request->map_state = UN_MAPPED;
+
+	if (!is_dma_capable() || !musb_ep->dma)
+		return;
+
+	/* Check if DMA engine can handle this request.
+	 * DMA code must reject the USB request explicitly.
+	 * Default behaviour is to map the request.
+	 */
+	if (dma->is_compatible)
+		compatible = dma->is_compatible(musb_ep->dma,
+				musb_ep->packet_sz, request->request.buf,
+				request->request.length);
+	if (!compatible)
+		return;
+
 	if (request->request.dma == DMA_ADDR_INVALID) {
 		request->request.dma = dma_map_single(
 				musb->controller,
@@ -105,44 +127,46 @@ static inline void map_dma_buffer(struct musb_request *request,
 				request->tx
 					? DMA_TO_DEVICE
 					: DMA_FROM_DEVICE);
-		request->mapped = 1;
+		request->map_state = MUSB_MAPPED;
 	} else {
 		dma_sync_single_for_device(musb->controller,
 			request->request.dma,
 			request->request.length,
 			request->tx
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
-		request->mapped = 0;
+		request->map_state = PRE_MAPPED;
 	}
 }
 
 /* Unmap the buffer from dma and maps it back to cpu */
 static inline void unmap_dma_buffer(struct musb_request *request,
 				struct musb *musb)
 {
+	if (!is_buffer_mapped(request))
+		return;
+
 	if (request->request.dma == DMA_ADDR_INVALID) {
 		DBG(20, "not unmapping a never mapped buffer\n");
 		return;
 	}
-	if (request->mapped) {
+	if (request->map_state == MUSB_MAPPED) {
 		dma_unmap_single(musb->controller,
 			request->request.dma,
 			request->request.length,
 			request->tx
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
 		request->request.dma = DMA_ADDR_INVALID;
-		request->mapped = 0;
-	} else {
+	} else { /* PRE_MAPPED */
 		dma_sync_single_for_cpu(musb->controller,
 			request->request.dma,
 			request->request.length,
 			request->tx
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
-
 	}
+	request->map_state = UN_MAPPED;
 }
 
 /*
@@ -172,8 +196,7 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable() && ep->dma)
-		unmap_dma_buffer(req, musb);
+	unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			csr);
 
 #ifndef	CONFIG_MUSB_PIO_ONLY
-	if (is_dma_capable() && musb_ep->dma) {
+	if (is_buffer_mapped(req)) {
 		struct dma_controller	*c = musb->dma_controller;
 		size_t request_size;
 
@@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		 * Unmap the dma buffer back to cpu if dma channel
 		 * programming fails
 		 */
-		if (is_dma_capable() && musb_ep->dma)
-			unmap_dma_buffer(req, musb);
+		unmap_dma_buffer(req, musb);
 
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
@@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		return;
 	}
 
-	if (is_cppi_enabled() && musb_ep->dma) {
+	if (is_cppi_enabled() && is_buffer_mapped(req)) {
 		struct dma_controller	*c = musb->dma_controller;
 		struct dma_channel	*channel = musb_ep->dma;
 
@@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		len = musb_readw(epio, MUSB_RXCOUNT);
 		if (request->actual < request->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
-			if (is_dma_capable() && musb_ep->dma) {
+			if (is_buffer_mapped(req)) {
 				struct dma_controller	*c;
 				struct dma_channel	*channel;
 				int			use_dma = 0;
@@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
-			if (tusb_dma_omap() && musb_ep->dma) {
+			if (tusb_dma_omap() && is_buffer_mapped(req)) {
 				struct dma_controller *c = musb->dma_controller;
 				struct dma_channel *channel = musb_ep->dma;
 				u32 dma_addr = request->dma + request->actual;
@@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			 * programming fails. This buffer is mapped if the
 			 * channel allocation is successful
 			 */
-			 if (is_dma_capable() && musb_ep->dma) {
+			 if (is_buffer_mapped(req)) {
 				unmap_dma_buffer(req, musb);
 
 				/*
@@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set TXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set RXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {
@@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma)
-		map_dma_buffer(request, musb);
-	else
-		request->mapped = 0;
+	map_dma_buffer(request, musb, musb_ep);
 
 	spin_lock_irqsave(&musb->lock, lockflags);
 

drivers/usb/musb/musb_gadget.h

@@ -35,13 +35,19 @@
 #ifndef __MUSB_GADGET_H
 #define __MUSB_GADGET_H
 
+enum buffer_map_state {
+	UN_MAPPED = 0,
+	PRE_MAPPED,
+	MUSB_MAPPED
+};
+
 struct musb_request {
 	struct usb_request	request;
 	struct musb_ep		*ep;
 	struct musb		*musb;
 	u8 tx;			/* endpoint direction */
 	u8 epnum;
-	u8 mapped;
+	enum buffer_map_state map_state;
 };
 
 static inline struct musb_request *to_musb_request(struct usb_request *req)

drivers/usb/musb/musb_host.c

@@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	/* Set RXMAXP with the FIFO size of the endpoint
 	 * to disable double buffer mode.
 	 */
-	if (musb->hwvers < MUSB_HWVERS_2000)
+	if (musb->double_buffer_not_ok)
 		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
 	else
 		musb_writew(ep->regs, MUSB_RXMAXP,
@@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* protocol/endpoint/interval/NAKlimit */
 		if (epnum) {
 			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
-			if (can_bulk_split(musb, qh->type))
+			if (musb->double_buffer_not_ok)
 				musb_writew(epio, MUSB_TXMAXP,
-					packet_sz
-					| ((hw_ep->max_packet_sz_tx /
-						packet_sz) - 1) << 11);
+						hw_ep->max_packet_sz_tx);
 			else
 				musb_writew(epio, MUSB_TXMAXP,
-					packet_sz);
+						qh->maxpacket |
+						((qh->hb_mult - 1) << 11));
 			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
 		} else {
 			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);

drivers/usb/musb/musbhsdma.h

@@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
 {
 	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
-		((u16)((u32) dma_addr & 0xFFFF)));
+		dma_addr);
 	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
-		((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+		(dma_addr >> 16));
 }
 
 static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
 {
-	return musb_readl(mbase,
+	u32 count = musb_readw(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+	count = count << 16;
+
+	count |= musb_readw(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+	return count;
 }
 
 static inline void musb_write_hsdma_count(void __iomem *mbase,
 				u8 bchannel, u32 len)
 {
-	musb_writel(mbase,
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
+	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
-		len);
+		(len >> 16));
 }
 
 #endif /* CONFIG_BLACKFIN */