Merge branch 'fix-phy-ignore-interrupts'

Florian Fainelli says:

====================
net: phy: Finally fix PHY_IGNORE_INTERRUPTS

This patch series finally fixes how PHY_IGNORE_INTERRUPTS are treated by
avoiding to poll the PHY *and* getting notified from link state changes by the
Ethernet MAC interrupt service routine.

Tested with bcmgenet since this is the HW that I have access to.

Targetting the "net" tree since these are bugfixes, but I would like Woojun and
Andrew to take a look and test that on their respective HW setups as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -401,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
 	 * Ethernet MAC ISRs
 	 */
 	if (priv->internal_phy)
-		priv->mii_bus->irq[phydev->mdio.addr] = PHY_IGNORE_INTERRUPT;
+		priv->phydev->irq = PHY_IGNORE_INTERRUPT;
 
 	return 0;
 }

drivers/net/phy/phy.c

@@ -692,25 +692,29 @@ void phy_change(struct work_struct *work)
 	struct phy_device *phydev =
 		container_of(work, struct phy_device, phy_queue);
 
-	if (phydev->drv->did_interrupt &&
-	    !phydev->drv->did_interrupt(phydev))
-		goto ignore;
+	if (phy_interrupt_is_valid(phydev)) {
+		if (phydev->drv->did_interrupt &&
+		    !phydev->drv->did_interrupt(phydev))
+			goto ignore;
 
-	if (phy_disable_interrupts(phydev))
-		goto phy_err;
+		if (phy_disable_interrupts(phydev))
+			goto phy_err;
+	}
 
 	mutex_lock(&phydev->lock);
 	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 		phydev->state = PHY_CHANGELINK;
 	mutex_unlock(&phydev->lock);
 
-	atomic_dec(&phydev->irq_disable);
-	enable_irq(phydev->irq);
+	if (phy_interrupt_is_valid(phydev)) {
+		atomic_dec(&phydev->irq_disable);
+		enable_irq(phydev->irq);
 
-	/* Reenable interrupts */
-	if (PHY_HALTED != phydev->state &&
-	    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
-		goto irq_enable_err;
+		/* Reenable interrupts */
+		if (PHY_HALTED != phydev->state &&
+		    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
+			goto irq_enable_err;
+	}
 
 	/* reschedule state queue work to run as soon as possible */
 	cancel_delayed_work_sync(&phydev->state_queue);
@@ -905,10 +909,10 @@ void phy_state_machine(struct work_struct *work)
 		phydev->adjust_link(phydev->attached_dev);
 		break;
 	case PHY_RUNNING:
-		/* Only register a CHANGE if we are polling or ignoring
-		 * interrupts and link changed since latest checking.
+		/* Only register a CHANGE if we are polling and link changed
+		 * since latest checking.
 		 */
-		if (!phy_interrupt_is_valid(phydev)) {
+		if (phydev->irq == PHY_POLL) {
 			old_link = phydev->link;
 			err = phy_read_status(phydev);
 			if (err)
@@ -1000,15 +1004,21 @@ void phy_state_machine(struct work_struct *work)
 		   phy_state_to_str(old_state),
 		   phy_state_to_str(phydev->state));
 
-	queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
-			   PHY_STATE_TIME * HZ);
+	/* Only re-schedule a PHY state machine change if we are polling the
+	 * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
+	 * between states from phy_mac_interrupt()
+	 */
+	if (phydev->irq == PHY_POLL)
+		queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
+				   PHY_STATE_TIME * HZ);
 }
 
 void phy_mac_interrupt(struct phy_device *phydev, int new_link)
 {
-	cancel_work_sync(&phydev->phy_queue);
 	phydev->link = new_link;
-	schedule_work(&phydev->phy_queue);
+
+	/* Trigger a state machine change */
+	queue_work(system_power_efficient_wq, &phydev->phy_queue);
 }
 EXPORT_SYMBOL(phy_mac_interrupt);