USB: add runtime frame_no quirk for big-endian OHCI

Add OHCI big endian frame_no quirk.  The frame_no value stored in the
HCCA is a 16 bit field at a specific offset, but since not all CPUs can
do 16-bit memory accesses it's used as a 32 bit field.  And that's why
big-endian OHCI must shift 16 bits ... unless the spec is not followed.

Currently there's one MPC52xx platform that doesn't need the shift. This
patch adds a new "big endian frame_no" quirk to control that at runtime.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ohci-ppc-of.c

@@ -134,8 +134,11 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 	}
 
 	ohci = hcd_to_ohci(hcd);
-	if (is_bigendian)
+	if (is_bigendian) {
 		ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+		if (of_device_is_compatible(dn, "mpc5200-ohci"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+	}
 
 	ohci_hcd_init(ohci);
 

drivers/usb/host/ohci-ppc-soc.c

@@ -73,6 +73,11 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 
 	ohci = hcd_to_ohci(hcd);
 	ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+#ifdef CONFIG_PPC_MPC52xx
+	/* MPC52xx doesn't need frame_no shift */
+	ohci->flags |= OHCI_QUIRK_FRAME_NO;
+#endif
 	ohci_hcd_init(ohci);
 
 	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);

drivers/usb/host/ohci.h

@@ -398,6 +398,7 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
 #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
 #define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
+#define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
@@ -633,23 +634,21 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
 /* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
  * hardware handles 16 bit reads.  That creates a different confusion on
  * some big-endian SOC implementations.  Same thing happens with PSW access.
- *
- * FIXME: Deal with that as a runtime quirk when STB03xxx is ported over
- * to arch/powerpc
  */
 
-#ifdef CONFIG_STB03xxx
-#define OHCI_BE_FRAME_NO_SHIFT	16
+#ifdef CONFIG_PPC_MPC52xx
+#define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
 #else
-#define OHCI_BE_FRAME_NO_SHIFT	0
+#define big_endian_frame_no_quirk(ohci)	0
 #endif
 
 static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
 {
 	u32 tmp;
 	if (big_endian_desc(ohci)) {
 		tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
-		tmp >>= OHCI_BE_FRAME_NO_SHIFT;
+		if (!big_endian_frame_no_quirk(ohci))
+			tmp >>= 16;
 	} else
 		tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);