net: dsa: b53: Report VLAN table occupancy via devlink

We already maintain an array of VLANs used by the switch so we can
simply iterate over it to report the occupancy via devlink.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/b53/b53_common.c

@@ -977,6 +977,54 @@ int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
 }
 EXPORT_SYMBOL(b53_get_sset_count);
 
+enum b53_devlink_resource_id {
+	B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+};
+
+static u64 b53_devlink_vlan_table_get(void *priv)
+{
+	struct b53_device *dev = priv;
+	struct b53_vlan *vl;
+	unsigned int i;
+	u64 count = 0;
+
+	for (i = 0; i < dev->num_vlans; i++) {
+		vl = &dev->vlans[i];
+		if (vl->members)
+			count++;
+	}
+
+	return count;
+}
+
+int b53_setup_devlink_resources(struct dsa_switch *ds)
+{
+	struct devlink_resource_size_params size_params;
+	struct b53_device *dev = ds->priv;
+	int err;
+
+	devlink_resource_size_params_init(&size_params, dev->num_vlans,
+					  dev->num_vlans,
+					  1, DEVLINK_RESOURCE_UNIT_ENTRY);
+
+	err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
+					    B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+					    DEVLINK_RESOURCE_ID_PARENT_TOP,
+					    &size_params);
+	if (err)
+		goto out;
+
+	dsa_devlink_resource_occ_get_register(ds,
+					      B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+					      b53_devlink_vlan_table_get, dev);
+
+	return 0;
+out:
+	dsa_devlink_resources_unregister(ds);
+	return err;
+}
+EXPORT_SYMBOL(b53_setup_devlink_resources);
+
 static int b53_setup(struct dsa_switch *ds)
 {
 	struct b53_device *dev = ds->priv;
@@ -992,8 +1040,10 @@ static int b53_setup(struct dsa_switch *ds)
 	b53_reset_mib(dev);
 
 	ret = b53_apply_config(dev);
-	if (ret)
+	if (ret) {
 		dev_err(ds->dev, "failed to apply configuration\n");
+		return ret;
+	}
 
 	/* Configure IMP/CPU port, disable all other ports. Enabled
 	 * ports will be configured with .port_enable
@@ -1012,7 +1062,12 @@ static int b53_setup(struct dsa_switch *ds)
 	 */
 	ds->vlan_filtering_is_global = true;
 
-	return ret;
+	return b53_setup_devlink_resources(ds);
+}
+
+static void b53_teardown(struct dsa_switch *ds)
+{
+	dsa_devlink_resources_unregister(ds);
 }
 
 static void b53_force_link(struct b53_device *dev, int port, int link)
@@ -2141,6 +2196,7 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port)
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
+	.teardown		= b53_teardown,
 	.get_strings		= b53_get_strings,
 	.get_ethtool_stats	= b53_get_ethtool_stats,
 	.get_sset_count		= b53_get_sset_count,

drivers/net/dsa/b53/b53_priv.h

@@ -328,6 +328,7 @@ void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
 void b53_br_fast_age(struct dsa_switch *ds, int port);
 int b53_br_egress_floods(struct dsa_switch *ds, int port,
 			 bool unicast, bool multicast);
+int b53_setup_devlink_resources(struct dsa_switch *ds);
 void b53_port_event(struct dsa_switch *ds, int port);
 void b53_phylink_validate(struct dsa_switch *ds, int port,
 			  unsigned long *supported,

drivers/net/dsa/bcm_sf2.c

@@ -936,7 +936,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	b53_configure_vlan(ds);
 	bcm_sf2_enable_acb(ds);
 
-	return 0;
+	return b53_setup_devlink_resources(ds);
+}
+
+static void bcm_sf2_sw_teardown(struct dsa_switch *ds)
+{
+	dsa_devlink_resources_unregister(ds);
 }
 
 /* The SWITCH_CORE register space is managed by b53 but operates on a page +
@@ -1073,6 +1078,7 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds, int port,
 static const struct dsa_switch_ops bcm_sf2_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= bcm_sf2_sw_setup,
+	.teardown		= bcm_sf2_sw_teardown,
 	.get_strings		= bcm_sf2_sw_get_strings,
 	.get_ethtool_stats	= bcm_sf2_sw_get_ethtool_stats,
 	.get_sset_count		= bcm_sf2_sw_get_sset_count,