Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/jkirsher/next-queue

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-01-23

This series contains updates to i40e and i40evf only.

Pawel enables FlatNVM support on x722 devices by allowing nvmupdate tool
to configure the preservation flags in the AdminQ command.

Mitch fixes a potential divide by zero error when DCB is enabled and
the firmware fails to configure the VSI, so check for this state.
Fixed a bug where the driver could fail to adhere to ETS bandwidth
allocations if 8 traffic classes were configured on the switch.

Sudheer fixes a potential deadlock by avoiding to call
flush_schedule_work() in i40evf_remove(), since cancel_work_sync()
and cancel_delayed_work_sync() already cleans up necessary work items.
Fixed an issue with the problematic detection and recovery from
hung queues in the PF which was causing lost interrupts.  This is done
by triggering a software interrupt so that interrupts are forced on
and if we are already in napi_poll and an interrupt fires, napi_poll
will not be rescheduled and the interrupt is lost.

Avinash fixes an issue in the VF where is was possible to issue a
reset_task while the device is currently being removed.

Michal fixes an issue occurring while calling i40e_led_set() with
the blink parameter set to true, which was causing the activity LED
instead of the link LED to blink for port identification.

Shiraz changes the client interface to not call client close/open on
netdev down/up events, since this causes a lot of thrash that is
not needed.  Instead, disable the PE TCP-ENA flag during a netdev
down event and re-enable on a netdev up event, since this blocks all
TCP traffic to the RDMA protocol engine.

Alan fixes an issue which was causing a potential transmit hang by
ignoring the PF link up message if the VF state is not yet in the
RUNNING state.

Amritha fixes the channel VSI recreation during the reset flow to
reconfigure the transmit rings and the queue context associated with
the channel VSI.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e_adminq.c

@@ -1027,7 +1027,7 @@ i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
 	hw->aq.arq.next_to_clean = ntc;
 	hw->aq.arq.next_to_use = ntu;
 
-	i40e_nvmupd_check_wait_event(hw, le16_to_cpu(e->desc.opcode));
+	i40e_nvmupd_check_wait_event(hw, le16_to_cpu(e->desc.opcode), &e->desc);
 clean_arq_element_out:
 	/* Set pending if needed, unlock and return */
 	if (pending)

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -2231,8 +2231,12 @@ I40E_CHECK_CMD_LENGTH(i40e_aqc_phy_register_access);
  */
 struct i40e_aqc_nvm_update {
 	u8	command_flags;
-#define I40E_AQ_NVM_LAST_CMD	0x01
-#define I40E_AQ_NVM_FLASH_ONLY	0x80
+#define I40E_AQ_NVM_LAST_CMD			0x01
+#define I40E_AQ_NVM_FLASH_ONLY			0x80
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT	1
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_MASK	0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED	0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_ALL	0x01
 	u8	module_pointer;
 	__le16	length;
 	__le32	offset;

drivers/net/ethernet/intel/i40e/i40e_client.c

@@ -378,11 +378,11 @@ void i40e_client_subtask(struct i40e_pf *pf)
 	if (!client || !cdev)
 		return;
 
-	/* Here we handle client opens. If the client is down, but
-	 * the netdev is up, then open the client.
+	/* Here we handle client opens. If the client is down, and
+	 * the netdev is registered, then open the client.
 	 */
 	if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) {
-		if (!test_bit(__I40E_VSI_DOWN, vsi->state) &&
+		if (vsi->netdev_registered &&
 		    client->ops && client->ops->open) {
 			set_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state);
 			ret = client->ops->open(&cdev->lan_info, client);
@@ -393,17 +393,19 @@ void i40e_client_subtask(struct i40e_pf *pf)
 				i40e_client_del_instance(pf);
 			}
 		}
-	} else {
-	/* Likewise for client close. If the client is up, but the netdev
-	 * is down, then close the client.
-	 */
-		if (test_bit(__I40E_VSI_DOWN, vsi->state) &&
-		    client->ops && client->ops->close) {
-			clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state);
-			client->ops->close(&cdev->lan_info, client, false);
-			i40e_client_release_qvlist(&cdev->lan_info);
-		}
 	}
+
+	/* enable/disable PE TCP_ENA flag based on netdev down/up
+	 */
+	if (test_bit(__I40E_VSI_DOWN, vsi->state))
+		i40e_client_update_vsi_ctxt(&cdev->lan_info, client,
+					    0, 0, 0,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE);
+	else
+		i40e_client_update_vsi_ctxt(&cdev->lan_info, client,
+					    0, 0,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE,
+					    I40E_CLIENT_VSI_FLAG_TCP_ENABLE);
 }
 
 /**
@@ -717,13 +719,13 @@ static int i40e_client_update_vsi_ctxt(struct i40e_info *ldev,
 		return -ENOENT;
 	}
 
-	if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE) &&
-	    (flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE)) {
+	if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) &&
+	    (flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) {
 		ctxt.info.valid_sections =
 			cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID);
 		ctxt.info.queueing_opt_flags |= I40E_AQ_VSI_QUE_OPT_TCP_ENA;
-	} else if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE) &&
-		  !(flag & I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE)) {
+	} else if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) &&
+		  !(flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) {
 		ctxt.info.valid_sections =
 			cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID);
 		ctxt.info.queueing_opt_flags &= ~I40E_AQ_VSI_QUE_OPT_TCP_ENA;

drivers/net/ethernet/intel/i40e/i40e_client.h

@@ -132,7 +132,7 @@ struct i40e_info {
 
 #define I40E_CLIENT_RESET_LEVEL_PF   1
 #define I40E_CLIENT_RESET_LEVEL_CORE 2
-#define I40E_CLIENT_VSI_FLAG_TCP_PACKET_ENABLE  BIT(1)
+#define I40E_CLIENT_VSI_FLAG_TCP_ENABLE  BIT(1)
 
 struct i40e_ops {
 	/* setup_q_vector_list enables queues with a particular vector */

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -1486,6 +1486,7 @@ u32 i40e_led_get(struct i40e_hw *hw)
 		case I40E_COMBINED_ACTIVITY:
 		case I40E_FILTER_ACTIVITY:
 		case I40E_MAC_ACTIVITY:
+		case I40E_LINK_ACTIVITY:
 			continue;
 		default:
 			break;
@@ -1534,6 +1535,7 @@ void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink)
 		case I40E_COMBINED_ACTIVITY:
 		case I40E_FILTER_ACTIVITY:
 		case I40E_MAC_ACTIVITY:
+		case I40E_LINK_ACTIVITY:
 			continue;
 		default:
 			break;
@@ -1544,9 +1546,6 @@ void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink)
 		gpio_val |= ((mode << I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT) &
 			     I40E_GLGEN_GPIO_CTL_LED_MODE_MASK);
 
-		if (mode == I40E_LINK_ACTIVITY)
-			blink = false;
-
 		if (blink)
 			gpio_val |= BIT(I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT);
 		else
@@ -3465,13 +3464,14 @@ i40e_status i40e_aq_discover_capabilities(struct i40e_hw *hw,
  * @length: length of the section to be written (in bytes from the offset)
  * @data: command buffer (size [bytes] = length)
  * @last_command: tells if this is the last command in a series
+ * @preservation_flags: Preservation mode flags
  * @cmd_details: pointer to command details structure or NULL
  *
  * Update the NVM using the admin queue commands
  **/
 i40e_status i40e_aq_update_nvm(struct i40e_hw *hw, u8 module_pointer,
 			       u32 offset, u16 length, void *data,
-			       bool last_command,
+				bool last_command, u8 preservation_flags,
 			       struct i40e_asq_cmd_details *cmd_details)
 {
 	struct i40e_aq_desc desc;
@@ -3490,6 +3490,16 @@ i40e_status i40e_aq_update_nvm(struct i40e_hw *hw, u8 module_pointer,
 	/* If this is the last command in a series, set the proper flag. */
 	if (last_command)
 		cmd->command_flags |= I40E_AQ_NVM_LAST_CMD;
+	if (hw->mac.type == I40E_MAC_X722) {
+		if (preservation_flags == I40E_NVM_PRESERVATION_FLAGS_SELECTED)
+			cmd->command_flags |=
+				(I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED <<
+				 I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT);
+		else if (preservation_flags == I40E_NVM_PRESERVATION_FLAGS_ALL)
+			cmd->command_flags |=
+				(I40E_AQ_NVM_PRESERVATION_FLAGS_ALL <<
+				 I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT);
+	}
 	cmd->module_pointer = module_pointer;
 	cmd->offset = cpu_to_le32(offset);
 	cmd->length = cpu_to_le16(length);