Merge branch 'net-at803x-cleanups'

Christian Marangi says:

====================
net: phy: at803x: additional cleanup for qca808x

This small series is a preparation for the big code split. While the
qca808x code is waiting to be reviwed and merged, we can further cleanup
and generalize shared functions between at803x and qca808x.

With these last 2 patch everything is ready to move the driver to a
dedicated directory and split the code by creating a library module
for the few shared functions between the 2 driver.

Eventually at803x can be further cleaned and generalized but everything
will be already self contained and related only to at803x family of PHYs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/at803x.c

@@ -301,6 +301,11 @@ static struct at803x_hw_stat qca83xx_hw_stats[] = {
 	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
 };
 
+struct at803x_ss_mask {
+	u16 speed_mask;
+	u8 speed_shift;
+};
+
 struct at803x_priv {
 	int flags;
 	u16 clk_25m_reg;
@@ -921,7 +926,8 @@ static void at803x_link_change_notify(struct phy_device *phydev)
 	}
 }
 
-static int at803x_read_specific_status(struct phy_device *phydev)
+static int at803x_read_specific_status(struct phy_device *phydev,
+				       struct at803x_ss_mask ss_mask)
 {
 	int ss;
 
@@ -940,11 +946,8 @@ static int at803x_read_specific_status(struct phy_device *phydev)
 		if (sfc < 0)
 			return sfc;
 
-		/* qca8081 takes the different bits for speed value from at803x */
-		if (phydev->drv->phy_id == QCA8081_PHY_ID)
-			speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss);
-		else
-			speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
+		speed = ss & ss_mask.speed_mask;
+		speed >>= ss_mask.speed_shift;
 
 		switch (speed) {
 		case AT803X_SS_SPEED_10:
@@ -989,6 +992,7 @@ static int at803x_read_specific_status(struct phy_device *phydev)
 static int at803x_read_status(struct phy_device *phydev)
 {
 	struct at803x_priv *priv = phydev->priv;
+	struct at803x_ss_mask ss_mask = { 0 };
 	int err, old_link = phydev->link;
 
 	if (priv->is_1000basex)
@@ -1012,7 +1016,9 @@ static int at803x_read_status(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = at803x_read_specific_status(phydev);
+	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
+	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
+	err = at803x_read_specific_status(phydev, ss_mask);
 	if (err < 0)
 		return err;
 
@@ -1045,9 +1051,8 @@ static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
 			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
 }
 
-static int at803x_config_aneg(struct phy_device *phydev)
+static int at803x_prepare_config_aneg(struct phy_device *phydev)
 {
-	struct at803x_priv *priv = phydev->priv;
 	int ret;
 
 	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
@@ -1064,33 +1069,22 @@ static int at803x_config_aneg(struct phy_device *phydev)
 			return ret;
 	}
 
-	if (priv->is_1000basex)
-		return genphy_c37_config_aneg(phydev);
-
-	/* Do not restart auto-negotiation by setting ret to 0 defautly,
-	 * when calling __genphy_config_aneg later.
-	 */
-	ret = 0;
-
-	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
-		int phy_ctrl = 0;
+	return 0;
+}
 
-		/* The reg MII_BMCR also needs to be configured for force mode, the
-		 * genphy_config_aneg is also needed.
-		 */
-		if (phydev->autoneg == AUTONEG_DISABLE)
-			genphy_c45_pma_setup_forced(phydev);
+static int at803x_config_aneg(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+	int ret;
 
-		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
-			phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
+	ret = at803x_prepare_config_aneg(phydev);
+	if (ret)
+		return ret;
 
-		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-				MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
-		if (ret < 0)
-			return ret;
-	}
+	if (priv->is_1000basex)
+		return genphy_c37_config_aneg(phydev);
 
-	return __genphy_config_aneg(phydev, ret);
+	return genphy_config_aneg(phydev);
 }
 
 static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
@@ -1881,6 +1875,7 @@ static int qca808x_config_init(struct phy_device *phydev)
 
 static int qca808x_read_status(struct phy_device *phydev)
 {
+	struct at803x_ss_mask ss_mask = { 0 };
 	int ret;
 
 	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
@@ -1894,7 +1889,10 @@ static int qca808x_read_status(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	ret = at803x_read_specific_status(phydev);
+	/* qca8081 takes the different bits for speed value from at803x */
+	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
+	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
+	ret = at803x_read_specific_status(phydev, ss_mask);
 	if (ret < 0)
 		return ret;
 
@@ -2118,6 +2116,32 @@ static int qca808x_get_features(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_config_aneg(struct phy_device *phydev)
+{
+	int phy_ctrl = 0;
+	int ret;
+
+	ret = at803x_prepare_config_aneg(phydev);
+	if (ret)
+		return ret;
+
+	/* The reg MII_BMCR also needs to be configured for force mode, the
+	 * genphy_config_aneg is also needed.
+	 */
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		genphy_c45_pma_setup_forced(phydev);
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
+		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
+	if (ret < 0)
+		return ret;
+
+	return __genphy_config_aneg(phydev, ret);
+}
+
 static void qca808x_link_change_notify(struct phy_device *phydev)
 {
 	/* Assert interface sgmii fifo on link down, deassert it on link up,
@@ -2295,7 +2319,7 @@ static struct phy_driver at803x_driver[] = {
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.get_features		= qca808x_get_features,
-	.config_aneg		= at803x_config_aneg,
+	.config_aneg		= qca808x_config_aneg,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,