ACPI: processor: Get rid of ACPICA message printing

The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere.  Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.

For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in the ACPI processor driver with
corresponding dev_*(), acpi_handle_*() and pr_*() calls depending
on the context in which they appear.

Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going
to be necessary any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>

Documentation/firmware-guide/acpi/debug.rst

@@ -58,7 +58,6 @@ shows the supported mask values, currently these::
     ACPI_CONTAINER_COMPONENT        0x01000000
     ACPI_SYSTEM_COMPONENT           0x02000000
     ACPI_MEMORY_DEVICE_COMPONENT    0x08000000
-    ACPI_PROCESSOR_COMPONENT        0x20000000
 
 debug_level
 ===========

drivers/acpi/acpi_processor.c

@@ -22,10 +22,6 @@
 
 #include "internal.h"
 
-#define _COMPONENT	ACPI_PROCESSOR_COMPONENT
-
-ACPI_MODULE_NAME("processor");
-
 DEFINE_PER_CPU(struct acpi_processor *, processors);
 EXPORT_PER_CPU_SYMBOL(processors);
 
@@ -51,19 +47,19 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 
 	switch (dev->revision) {
 	case 0:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+		dev_dbg(&dev->dev, "Found PIIX4 A-step\n");
 		break;
 	case 1:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+		dev_dbg(&dev->dev, "Found PIIX4 B-step\n");
 		break;
 	case 2:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+		dev_dbg(&dev->dev, "Found PIIX4E\n");
 		break;
 	case 3:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+		dev_dbg(&dev->dev, "Found PIIX4M\n");
 		break;
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+		dev_dbg(&dev->dev, "Found unknown PIIX4\n");
 		break;
 	}
 
@@ -129,11 +125,9 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 	}
 
 	if (errata.piix4.bmisx)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
+		dev_dbg(&dev->dev, "Bus master activity detection (BM-IDE) erratum enabled\n");
 	if (errata.piix4.fdma)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Type-F DMA livelock erratum (C3 disabled)\n"));
+		dev_dbg(&dev->dev, "Type-F DMA livelock erratum (C3 disabled)\n");
 
 	return 0;
 }
@@ -244,11 +238,9 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	 */
 	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
 		pr->flags.bm_control = 1;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus mastering arbitration control present\n"));
+		dev_dbg(&device->dev, "Bus mastering arbitration control present\n");
 	} else
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "No bus mastering arbitration control\n"));
+		dev_dbg(&device->dev, "No bus mastering arbitration control\n");
 
 	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
 		/* Declared with "Processor" statement; match ProcessorID */
@@ -291,7 +283,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	pr->phys_id = acpi_get_phys_id(pr->handle, device_declaration,
 					pr->acpi_id);
 	if (invalid_phys_cpuid(pr->phys_id))
-		acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n");
+		dev_dbg(&device->dev, "Failed to get CPU physical ID.\n");
 
 	pr->id = acpi_map_cpuid(pr->phys_id, pr->acpi_id);
 	if (!cpu0_initialized && !acpi_has_cpu_in_madt()) {
@@ -328,11 +320,10 @@ static int acpi_processor_get_info(struct acpi_device *device)
 	 * CPU+CPU ID.
 	 */
 	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
-			  pr->acpi_id));
+	dev_dbg(&device->dev, "Processor [%d:%d]\n", pr->id, pr->acpi_id);
 
 	if (!object.processor.pblk_address)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+		dev_dbg(&device->dev, "No PBLK (NULL address)\n");
 	else if (object.processor.pblk_length != 6)
 		dev_err(&device->dev, "Invalid PBLK length [%d]\n",
 			    object.processor.pblk_length);

drivers/acpi/processor_driver.c

@@ -28,9 +28,6 @@
 #define ACPI_PROCESSOR_NOTIFY_POWER	0x81
 #define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
 
-#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_driver");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI Processor Driver");
 MODULE_LICENSE("GPL");
@@ -87,8 +84,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
 						  dev_name(&device->dev), event, 0);
 		break;
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
+		acpi_handle_debug(handle, "Unsupported event [0x%x]\n", event);
 		break;
 	}
 

drivers/acpi/processor_idle.c

@@ -31,9 +31,6 @@
 #include <asm/apic.h>
 #endif
 
-#define _COMPONENT              ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_idle");
-
 #define ACPI_IDLE_STATE_START	(IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
 
 static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
@@ -239,8 +236,8 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 	 * 100 microseconds.
 	 */
 	if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			"C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
+		acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n",
+				  acpi_gbl_FADT.c2_latency);
 		/* invalidate C2 */
 		pr->power.states[ACPI_STATE_C2].address = 0;
 	}
@@ -250,16 +247,15 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 	 * 1000 microseconds.
 	 */
 	if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			"C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
+		acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n",
+				  acpi_gbl_FADT.c3_latency);
 		/* invalidate C3 */
 		pr->power.states[ACPI_STATE_C3].address = 0;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "lvl2[0x%08x] lvl3[0x%08x]\n",
+	acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n",
 			  pr->power.states[ACPI_STATE_C2].address,
-			  pr->power.states[ACPI_STATE_C3].address));
+			  pr->power.states[ACPI_STATE_C3].address);
 
 	snprintf(pr->power.states[ACPI_STATE_C2].desc,
 			 ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
@@ -324,8 +320,8 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 	 * devices thus we take the conservative approach.
 	 */
 	else if (errata.piix4.fdma) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "C3 not supported on PIIX4 with Type-F DMA\n"));
+		acpi_handle_debug(pr->handle,
+				  "C3 not supported on PIIX4 with Type-F DMA\n");
 		return;
 	}
 
@@ -344,13 +340,13 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 		if (!pr->flags.bm_control) {
 			if (pr->flags.has_cst != 1) {
 				/* bus mastering control is necessary */
-				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"C3 support requires BM control\n"));
+				acpi_handle_debug(pr->handle,
+						  "C3 support requires BM control\n");
 				return;
 			} else {
 				/* Here we enter C3 without bus mastering */
-				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"C3 support without BM control\n"));
+				acpi_handle_debug(pr->handle,
+						  "C3 support without BM control\n");
 			}
 		}
 	} else {
@@ -359,9 +355,9 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 		 * supported on when bm_check is not required.
 		 */
 		if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			acpi_handle_debug(pr->handle,
 					  "Cache invalidation should work properly"
-					  " for C3 to be enabled on SMP systems\n"));
+					  " for C3 to be enabled on SMP systems\n");
 			return;
 		}
 	}
@@ -843,7 +839,7 @@ static int acpi_processor_evaluate_lpi(acpi_handle handle,
 
 	status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n"));
+		acpi_handle_debug(handle, "No _LPI, giving up\n");
 		return -ENODEV;
 	}
 

drivers/acpi/processor_pdc.c

@@ -16,9 +16,6 @@
 
 #include "internal.h"
 
-#define _COMPONENT              ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_pdc");
-
 static bool __init processor_physically_present(acpi_handle handle)
 {
 	int cpuid, type;
@@ -132,8 +129,8 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
 
 	if (ACPI_FAILURE(status))
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		    "Could not evaluate _PDC, using legacy perf. control.\n"));
+		acpi_handle_debug(handle,
+		    "Could not evaluate _PDC, using legacy perf control\n");
 
 	return status;
 }

drivers/acpi/processor_perflib.c

@@ -23,8 +23,6 @@
 #define PREFIX "ACPI: "
 
 #define ACPI_PROCESSOR_FILE_PERFORMANCE	"performance"
-#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_perflib");
 
 static DEFINE_MUTEX(performance_mutex);
 
@@ -70,7 +68,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		acpi_processor_ppc_in_use = true;
 
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
+		acpi_handle_warn(pr->handle, "_PPC evaluation failed: %s\n",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -199,7 +198,8 @@ static int acpi_processor_get_performance_control(struct acpi_processor *pr)
 
 	status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PCT"));
+		acpi_handle_warn(pr->handle, "_PCT evaluation failed: %s\n",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -299,7 +299,8 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
 
 	status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PSS"));
+		acpi_handle_warn(pr->handle, "_PSS evaluation failed: %s\n",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -310,8 +311,8 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
 		goto end;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d performance states\n",
-			  pss->package.count));
+	acpi_handle_debug(pr->handle, "Found %d performance states\n",
+			  pss->package.count);
 
 	pr->performance->state_count = pss->package.count;
 	pr->performance->states =
@@ -330,27 +331,28 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
 		state.length = sizeof(struct acpi_processor_px);
 		state.pointer = px;
 
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i));
+		acpi_handle_debug(pr->handle, "Extracting state %d\n", i);
 
 		status = acpi_extract_package(&(pss->package.elements[i]),
 					      &format, &state);
 		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status, "Invalid _PSS data"));
+			acpi_handle_warn(pr->handle, "Invalid _PSS data: %s\n",
+					 acpi_format_exception(status));
 			result = -EFAULT;
 			kfree(pr->performance->states);
 			goto end;
 		}
 
 		amd_fixup_frequency(px, i);
 
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		acpi_handle_debug(pr->handle,
 				  "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n",
 				  i,
 				  (u32) px->core_frequency,
 				  (u32) px->power,
 				  (u32) px->transition_latency,
 				  (u32) px->bus_master_latency,
-				  (u32) px->control, (u32) px->status));
+				  (u32) px->control, (u32) px->status);
 
 		/*
 		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
@@ -400,8 +402,8 @@ int acpi_processor_get_performance_info(struct acpi_processor *pr)
 		return -EINVAL;
 
 	if (!acpi_has_method(pr->handle, "_PCT")) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "ACPI-based processor performance control unavailable\n"));
+		acpi_handle_debug(pr->handle,
+				  "ACPI-based processor performance control unavailable\n");
 		return -ENODEV;
 	}
 
@@ -442,18 +444,17 @@ int acpi_processor_pstate_control(void)
 	if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control)
 		return 0;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "Writing pstate_control [0x%x] to smi_command [0x%x]\n",
-			  acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+	pr_debug("Writing pstate_control [0x%x] to smi_command [0x%x]\n",
+		 acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command);
 
 	status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
 				    (u32)acpi_gbl_FADT.pstate_control, 8);
 	if (ACPI_SUCCESS(status))
 		return 1;
 
-	ACPI_EXCEPTION((AE_INFO, status,
-			"Failed to write pstate_control [0x%x] to smi_command [0x%x]",
-			acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+	pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n",
+		acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command,
+		acpi_format_exception(status));
 	return -EIO;
 }
 
@@ -485,7 +486,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
 
 	result = acpi_processor_pstate_control();
 	if (!result) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_control\n"));
+		pr_debug("No SMI port or pstate_control\n");
 		module_put(calling_module);
 		return 0;
 	}