ixgbe: Change Direct Attach Twinax cable detection for SFP+ NICs

The SFF specification for Direct Attach cable detection has now been
ratified.  Previously, DA cable detect was looking at the Twinaxial bit in
byte 9 of the SFP+ EEPROM.  The spec now defines active and passive DA
cables in byte 8 of the SFP+ EEPROM.  This patch changes the cable
detection for both 82598 and 82599 SFP+ adapters to conform to the new
spec.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe_phy.c

@@ -527,7 +527,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 	u8 comp_codes_1g = 0;
 	u8 comp_codes_10g = 0;
 	u8 oui_bytes[3] = {0, 0, 0};
-	u8 transmission_media = 0;
+	u8 cable_tech = 0;
 	u16 enforce_sfp = 0;
 
 	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
@@ -543,8 +543,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		                            &comp_codes_1g);
 		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
 		                            &comp_codes_10g);
-		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
-		                            &transmission_media);
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
+		                            &cable_tech);
 
 		/* ID Module
 		 * =========
@@ -557,7 +557,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
 			else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_sr;
@@ -566,7 +566,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			else
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		} else if (hw->mac.type == ixgbe_mac_82599EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
 					             ixgbe_sfp_type_da_cu_core0;
@@ -621,8 +621,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
 			switch (vendor_oui) {
 			case IXGBE_SFF_VENDOR_OUI_TYCO:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_tyco;
 				break;
 			case IXGBE_SFF_VENDOR_OUI_FTL:
@@ -635,17 +634,16 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.type = ixgbe_phy_sfp_intel;
 				break;
 			default:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_unknown;
 				else
 					hw->phy.type = ixgbe_phy_sfp_unknown;
 				break;
 			}
 		}
 
-		/* All DA cables are supported */
-		if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) {
+		/* All passive DA cables are supported */
+		if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
 			status = 0;
 			goto out;
 		}

drivers/net/ixgbe/ixgbe_phy.h

@@ -39,10 +39,10 @@
 #define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
 #define IXGBE_SFF_1GBE_COMP_CODES    0x6
 #define IXGBE_SFF_10GBE_COMP_CODES   0x3
-#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+#define IXGBE_SFF_CABLE_TECHNOLOGY   0x8
 
 /* Bitmasks */
-#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
 #define IXGBE_SFF_1GBASELX_CAPABLE           0x2
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10