Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…rzhang/linux

Pull thermal management updates from Zhang Rui:

 - add thermal driver for R-Car Gen3 thermal sensors.

 - add thermal driver for ZTE' zx2967 family thermal sensors.

 - convert thermal ID allocation from IDR to IDA.

 - fix a possible NULL dereference in imx thermal driver.

 - fix a ti-soc-thermal driver dependency issue so that critical thermal
   control is still available when CPU_THERMAL is not defined.

 - update binding information for QorIQ thermal driver.

 - a couple of cleanups in thermal core, intel_powerclamp, exynos,
   dra752-thermal, mtk-thermal driver.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
  powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
  dt-bindings: Update QorIQ TMU thermal bindings
  thermal: mtk_thermal: Staticise a number of data variables
  thermal: arm: dra752: Remove all TSHUT related definitions
  thermal: arm: dra752: Remove TSHUT configuration
  thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
  thermal: imx: Fix possible NULL dereference.
  thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
  thermal: zx2967: add thermal driver for ZTE's zx2967 family
  thermal: use cpumask_var_t for on-stack cpu masks
  dt: bindings: add documentation for zx2967 family thermal sensor
  thermal/intel_powerclamp: Remove set-but-not-used variables
  thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
  thermal: rcar_gen3_thermal: Document the R-Car Gen3
  thermal: convert devfreq_cooling to use an IDA
  thermal: convert cpu_cooling to use an IDA
  thermal: convert clock cooling to use an IDA
  thermal core: convert ID allocation to IDA

Documentation/devicetree/bindings/thermal/qoriq-thermal.txt

@@ -17,6 +17,12 @@ Required properties:
 	calibration data, as specified by the SoC reference manual.
 	The first cell of each pair is the value to be written to TTCFGR,
 	and the second is the value to be written to TSCFGR.
+- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
+	site ID, and represents the "n" in TRITSRn and TRATSRn.
+
+Optional property:
+- little-endian : If present, the TMU registers are little endian. If absent,
+	the default is big endian.
 
 Example:
 
@@ -60,4 +66,5 @@ tmu@f0000 {
 
 			       0x00030000 0x00000012
 			       0x00030001 0x0000001d>;
+	#thermal-sensor-cells = <1>;
 };

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt

@@ -0,0 +1,56 @@
+* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
+
+On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
+sensors (THS) which are the analog circuits for measuring temperature (Tj)
+inside the LSI.
+
+Required properties:
+- compatible		: "renesas,<soctype>-thermal",
+			  Examples with soctypes are:
+			    - "renesas,r8a7795-thermal" (R-Car H3)
+			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+- reg			: Address ranges of the thermal registers. Each sensor
+			  needs one address range. Sorting must be done in
+			  increasing order according to datasheet, i.e.
+			  TSC1, TSC2, ...
+- clocks		: Must contain a reference to the functional clock.
+- #thermal-sensor-cells : must be <1>.
+
+Optional properties:
+
+- interrupts           : interrupts routed to the TSC (3 for H3 and M3-W)
+- power-domain		: Must contain a reference to the power domain. This
+			  property is mandatory if the thermal sensor instance
+			  is part of a controllable power domain.
+
+Example:
+
+	tsc: thermal@e6198000 {
+		compatible = "renesas,r8a7795-thermal";
+		reg = <0 0xe6198000 0 0x68>,
+		      <0 0xe61a0000 0 0x5c>,
+		      <0 0xe61a8000 0 0x5c>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 522>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <1>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/thermal/zx2967-thermal.txt

@@ -0,0 +1,116 @@
+* ZTE zx2967 family Thermal
+
+Required Properties:
+- compatible: should be one of the following.
+    * zte,zx296718-thermal
+- reg: physical base address of the controller and length of memory mapped
+    region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "topcrm" for the topcrm clock.
+	       "apb" for the apb clock.
+- #thermal-sensor-cells: must be 0.
+
+Please note: slope coefficient defined in thermal-zones section need to be
+multiplied by 1000.
+
+Example for tempsensor:
+
+	tempsensor: tempsensor@148a000 {
+		compatible = "zte,zx296718-thermal";
+		reg = <0x0148a000 0x20>;
+		clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
+		clock-names = "topcrm", "apb";
+		#thermal-sensor-cells = <0>;
+	};
+
+Example for cooling device:
+
+	cooling_dev: cooling_dev {
+		cluster0_cooling_dev: cluster0-cooling-dev {
+			#cooling-cells = <2>;
+			cpumask = <0xf>;
+			capacitance = <1500>;
+		};
+
+	cluster1_cooling_dev: cluster1-cooling-dev {
+			#cooling-cells = <2>;
+			cpumask = <0x30>;
+			capacitance = <2000>;
+		};
+	};
+
+Example for thermal zones:
+
+	thermal-zones {
+		zx296718_thermal: zx296718_thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			sustainable-power = <6500>;
+
+			thermal-sensors = <&tempsensor 0>;
+			/*
+			 * slope need to be multiplied by 1000.
+			 */
+			coefficients = <1951 (-922)>;
+
+			trips {
+				trip0: switch_on_temperature {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1: desired_temperature {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				crit: critical_temperature {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&gpu 2 5>;
+				};
+
+				map1 {
+					trip = <&trip0>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map2 {
+					trip = <&trip1>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map3 {
+					trip = <&crit>;
+					cooling-device = <&cluster0_cooling_dev 1 2>;
+				};
+
+				map4 {
+					trip = <&trip0>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <9000>;
+				};
+
+				map5 {
+					trip = <&trip1>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <4096>;
+				};
+
+				map6 {
+					trip = <&crit>;
+					cooling-device = <&cluster1_cooling_dev 1 2>;
+					contribution = <4096>;
+				};
+			};
+		};
+	};

arch/powerpc/boot/dts/fsl/t1023si-post.dtsi

@@ -422,15 +422,15 @@
 				       0x00030001 0x0000000d
 				       0x00030002 0x00000019
 				       0x00030003 0x00000024>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 	};
 
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 
-			thermal-sensors = <&tmu>;
+			thermal-sensors = <&tmu 0>;
 
 			trips {
 				cpu_alert: cpu-alert {

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -526,15 +526,15 @@
 
 				       0x00030000 0x00000012
 				       0x00030001 0x0000001d>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 	};
 
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 
-			thermal-sensors = <&tmu>;
+			thermal-sensors = <&tmu 2>;
 
 			trips {
 				cpu_alert: cpu-alert {

drivers/thermal/Kconfig

@@ -245,6 +245,15 @@ config RCAR_THERMAL
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework.
 
+config RCAR_GEN3_THERMAL
+	tristate "Renesas R-Car Gen3 thermal driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  Enable this to plug the R-Car Gen3 thermal sensor driver into the Linux
+	  thermal framework.
+
 config KIRKWOOD_THERMAL
 	tristate "Temperature sensor on Marvell Kirkwood SoCs"
 	depends on MACH_KIRKWOOD || COMPILE_TEST
@@ -436,4 +445,12 @@ depends on (ARCH_QCOM && OF) || COMPILE_TEST
 source "drivers/thermal/qcom/Kconfig"
 endmenu
 
+config ZX2967_THERMAL
+	tristate "Thermal sensors on zx2967 SoC"
+	depends on ARCH_ZX || COMPILE_TEST
+	help
+	  Enable the zx2967 thermal sensors driver, which supports
+	  the primitive temperature sensor embedded in zx2967 SoCs.
+	  This sensor generates the real time die temperature.
+
 endif

drivers/thermal/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-y				+= samsung/
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
@@ -56,3 +57,4 @@ obj-$(CONFIG_TEGRA_SOCTHERM)	+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
 obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
+obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o

drivers/thermal/clock_cooling.c

@@ -65,42 +65,7 @@ struct clock_cooling_device {
 };
 #define to_clock_cooling_device(x) \
 		container_of(x, struct clock_cooling_device, clk_rate_change_nb)
-static DEFINE_IDR(clock_idr);
-static DEFINE_MUTEX(cooling_clock_lock);
-
-/**
- * clock_cooling_get_idr - function to get an unique id.
- * @id: int * value generated by this function.
- *
- * This function will populate @id with an unique
- * id, using the idr API.
- *
- * Return: 0 on success, an error code on failure.
- */
-static int clock_cooling_get_idr(int *id)
-{
-	int ret;
-
-	mutex_lock(&cooling_clock_lock);
-	ret = idr_alloc(&clock_idr, NULL, 0, 0, GFP_KERNEL);
-	mutex_unlock(&cooling_clock_lock);
-	if (unlikely(ret < 0))
-		return ret;
-	*id = ret;
-
-	return 0;
-}
-
-/**
- * release_idr - function to free the unique id.
- * @id: int value representing the unique id.
- */
-static void release_idr(int id)
-{
-	mutex_lock(&cooling_clock_lock);
-	idr_remove(&clock_idr, id);
-	mutex_unlock(&cooling_clock_lock);
-}
+static DEFINE_IDA(clock_ida);
 
 /* Below code defines functions to be used for clock as cooling device */
 
@@ -432,16 +397,17 @@ clock_cooling_register(struct device *dev, const char *clock_name)
 	if (IS_ERR(ccdev->clk))
 		return ERR_CAST(ccdev->clk);
 
-	ret = clock_cooling_get_idr(&ccdev->id);
-	if (ret)
-		return ERR_PTR(-EINVAL);
+	ret = ida_simple_get(&clock_ida, 0, 0, GFP_KERNEL);
+	if (ret < 0)
+		return ERR_PTR(ret);
+	ccdev->id = ret;
 
 	snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id);
 
 	cdev = thermal_cooling_device_register(dev_name, ccdev,
 					       &clock_cooling_ops);
 	if (IS_ERR(cdev)) {
-		release_idr(ccdev->id);
+		ida_simple_remove(&clock_ida, ccdev->id);
 		return ERR_PTR(-EINVAL);
 	}
 	ccdev->cdev = cdev;
@@ -450,7 +416,7 @@ clock_cooling_register(struct device *dev, const char *clock_name)
 	/* Assuming someone has already filled the opp table for this device */
 	ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table);
 	if (ret) {
-		release_idr(ccdev->id);
+		ida_simple_remove(&clock_ida, ccdev->id);
 		return ERR_PTR(ret);
 	}
 	ccdev->clock_state = 0;
@@ -481,6 +447,6 @@ void clock_cooling_unregister(struct thermal_cooling_device *cdev)
 	dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table);
 
 	thermal_cooling_device_unregister(ccdev->cdev);
-	release_idr(ccdev->id);
+	ida_simple_remove(&clock_ida, ccdev->id);
 }
 EXPORT_SYMBOL_GPL(clock_cooling_unregister);