Merge tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.or…

…g/drm-intel into drm-next

- first slice of the gvt device model (Zhenyu et al)
- compression support for gpu error states (Chris)
- sunset clause on gpu errors resulting in dmesg noise telling users
  how to report them
- .rodata diet from Tvrtko
- switch over lots of macros to only take dev_priv (Tvrtko)
- underrun suppression for dp link training (Ville)
- lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish
  from Jani
- gen9 wm fixes from Paulo&Lyude
- updated ddi programming for kbl (Rodrigo)
- respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville)

* tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits)
  drm/i915: Update DRIVER_DATE to 20161024
  drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
  drm/i915/dp: add lane_count check in intel_dp_check_link_status
  drm/i915: Fix whitespace issues
  drm/i915: Clean up DDI DDC/AUX CH sanitation
  drm/i915: Respect alternate_ddc_pin for all DDI ports
  drm/i915: Respect alternate_aux_channel for all DDI ports
  drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
  drm/i915: KBL - Recommended buffer translation programming for DisplayPort
  drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
  drm/i915: Add a sunset clause to GPU hang logging
  drm/i915: Stop reporting error details in dmesg as well as the error-state
  drm/i915/gvt: do not ignore return value of create_scratch_page
  drm/i915/gvt: fix spare warnings on odd constant _Bool cast
  drm/i915/gvt: mark symbols static where possible
  drm/i915/gvt: fix sparse warnings on different address spaces
  drm/i915/gvt: properly access enabled intel_engine_cs
  drm/i915/gvt: Remove defunct vmap_batch()
  drm/i915/gvt: Use common mapping routines for shadow_bb object
  drm/i915/gvt: Use common mapping routines for indirect_ctx object
  ...

Documentation/gpu/i915.rst

@@ -49,6 +49,15 @@ Intel GVT-g Guest Support(vGPU)
 .. kernel-doc:: drivers/gpu/drm/i915/i915_vgpu.c
    :internal:
 
+Intel GVT-g Host Support(vGPU device model)
+-------------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/i915/intel_gvt.c
+   :doc: Intel GVT-g host support
+
+.. kernel-doc:: drivers/gpu/drm/i915/intel_gvt.c
+   :internal:
+
 Display Hardware Handling
 =========================
 

MAINTAINERS

@@ -4064,6 +4064,16 @@ F:	include/drm/i915*
 F:	include/uapi/drm/i915_drm.h
 F:	Documentation/gpu/i915.rst
 
+INTEL GVT-g DRIVERS (Intel GPU Virtualization)
+M:      Zhenyu Wang <zhenyuw@linux.intel.com>
+M:      Zhi Wang <zhi.a.wang@intel.com>
+L:      igvt-g-dev@lists.01.org
+L:      intel-gfx@lists.freedesktop.org
+W:      https://01.org/igvt-g
+T:      git https://github.com/01org/gvt-linux.git
+S:      Supported
+F:      drivers/gpu/drm/i915/gvt/
+
 DRM DRIVERS FOR ATMEL HLCDC
 M:	Boris Brezillon <boris.brezillon@free-electrons.com>
 L:	dri-devel@lists.freedesktop.org

drivers/gpu/drm/drm_dp_dual_mode_helper.c

@@ -148,6 +148,14 @@ static bool is_type2_adaptor(uint8_t adaptor_id)
 			      DP_DUAL_MODE_REV_TYPE2);
 }
 
+static bool is_lspcon_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN],
+			      const uint8_t adaptor_id)
+{
+	return is_hdmi_adaptor(hdmi_id) &&
+		(adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
+		 DP_DUAL_MODE_TYPE_HAS_DPCD));
+}
+
 /**
  * drm_dp_dual_mode_detect - Identify the DP dual mode adaptor
  * @adapter: I2C adapter for the DDC bus
@@ -203,6 +211,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
 				    &adaptor_id, sizeof(adaptor_id));
 	if (ret == 0) {
+		if (is_lspcon_adaptor(hdmi_id, adaptor_id))
+			return DRM_DP_DUAL_MODE_LSPCON;
 		if (is_type2_adaptor(adaptor_id)) {
 			if (is_hdmi_adaptor(hdmi_id))
 				return DRM_DP_DUAL_MODE_TYPE2_HDMI;
@@ -364,3 +374,96 @@ const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type)
 	}
 }
 EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name);
+
+/**
+ * drm_lspcon_get_mode: Get LSPCON's current mode of operation by
+ * reading offset (0x80, 0x41)
+ * @adapter: I2C-over-aux adapter
+ * @mode: current lspcon mode of operation output variable
+ *
+ * Returns:
+ * 0 on success, sets the current_mode value to appropriate mode
+ * -error on failure
+ */
+int drm_lspcon_get_mode(struct i2c_adapter *adapter,
+			enum drm_lspcon_mode *mode)
+{
+	u8 data;
+	int ret = 0;
+
+	if (!mode) {
+		DRM_ERROR("NULL input\n");
+		return -EINVAL;
+	}
+
+	/* Read Status: i2c over aux */
+	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_LSPCON_CURRENT_MODE,
+				    &data, sizeof(data));
+	if (ret < 0) {
+		DRM_ERROR("LSPCON read(0x80, 0x41) failed\n");
+		return -EFAULT;
+	}
+
+	if (data & DP_DUAL_MODE_LSPCON_MODE_PCON)
+		*mode = DRM_LSPCON_MODE_PCON;
+	else
+		*mode = DRM_LSPCON_MODE_LS;
+	return 0;
+}
+EXPORT_SYMBOL(drm_lspcon_get_mode);
+
+/**
+ * drm_lspcon_set_mode: Change LSPCON's mode of operation by
+ * writing offset (0x80, 0x40)
+ * @adapter: I2C-over-aux adapter
+ * @mode: required mode of operation
+ *
+ * Returns:
+ * 0 on success, -error on failure/timeout
+ */
+int drm_lspcon_set_mode(struct i2c_adapter *adapter,
+			enum drm_lspcon_mode mode)
+{
+	u8 data = 0;
+	int ret;
+	int time_out = 200;
+	enum drm_lspcon_mode current_mode;
+
+	if (mode == DRM_LSPCON_MODE_PCON)
+		data = DP_DUAL_MODE_LSPCON_MODE_PCON;
+
+	/* Change mode */
+	ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_LSPCON_MODE_CHANGE,
+				     &data, sizeof(data));
+	if (ret < 0) {
+		DRM_ERROR("LSPCON mode change failed\n");
+		return ret;
+	}
+
+	/*
+	 * Confirm mode change by reading the status bit.
+	 * Sometimes, it takes a while to change the mode,
+	 * so wait and retry until time out or done.
+	 */
+	do {
+		ret = drm_lspcon_get_mode(adapter, &current_mode);
+		if (ret) {
+			DRM_ERROR("can't confirm LSPCON mode change\n");
+			return ret;
+		} else {
+			if (current_mode != mode) {
+				msleep(10);
+				time_out -= 10;
+			} else {
+				DRM_DEBUG_KMS("LSPCON mode changed to %s\n",
+						mode == DRM_LSPCON_MODE_LS ?
+						"LS" : "PCON");
+				return 0;
+			}
+		}
+	} while (time_out);
+
+	DRM_ERROR("LSPCON mode change timed out\n");
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL(drm_lspcon_set_mode);

drivers/gpu/drm/i915/Kconfig

@@ -46,6 +46,31 @@ config DRM_I915_PRELIMINARY_HW_SUPPORT
 
 	  If in doubt, say "N".
 
+config DRM_I915_CAPTURE_ERROR
+	bool "Enable capturing GPU state following a hang"
+	depends on DRM_I915
+	default y
+	help
+	  This option enables capturing the GPU state when a hang is detected.
+	  This information is vital for triaging hangs and assists in debugging.
+	  Please report any hang to
+            https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
+	  for triaging.
+
+	  If in doubt, say "Y".
+
+config DRM_I915_COMPRESS_ERROR
+	bool "Compress GPU error state"
+	depends on DRM_I915_CAPTURE_ERROR
+	select ZLIB_DEFLATE
+	default y
+	help
+	  This option selects ZLIB_DEFLATE if it isn't already
+	  selected and causes any error state captured upon a GPU hang
+	  to be compressed using zlib.
+
+	  If in doubt, say "Y".
+
 config DRM_I915_USERPTR
 	bool "Always enable userptr support"
 	depends on DRM_I915

drivers/gpu/drm/i915/Makefile

@@ -42,7 +42,6 @@ i915-y += i915_cmd_parser.o \
 	  i915_gem_stolen.o \
 	  i915_gem_tiling.o \
 	  i915_gem_userptr.o \
-	  i915_gpu_error.o \
 	  i915_trace_points.o \
 	  intel_breadcrumbs.o \
 	  intel_engine_cs.o \
@@ -102,11 +101,15 @@ i915-y += dvo_ch7017.o \
 	  intel_dvo.o \
 	  intel_hdmi.o \
 	  intel_i2c.o \
+	  intel_lspcon.o \
 	  intel_lvds.o \
 	  intel_panel.o \
 	  intel_sdvo.o \
 	  intel_tv.o
 
+# Post-mortem debug and GPU hang state capture
+i915-$(CONFIG_DRM_I915_CAPTURE_ERROR) += i915_gpu_error.o
+
 # virtual gpu code
 i915-y += i915_vgpu.o
 

drivers/gpu/drm/i915/gvt/Makefile

@@ -1,5 +1,7 @@
 GVT_DIR := gvt
-GVT_SOURCE := gvt.o
+GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \
+	interrupt.o gtt.o cfg_space.o opregion.o mmio.o display.o edid.o \
+	execlist.o scheduler.o sched_policy.o render.o cmd_parser.o
 
 ccflags-y                      += -I$(src) -I$(src)/$(GVT_DIR) -Wall
 i915-y			       += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))