Merge branch 'dpaa2-mac-add-PCS-support-through-the-Lynx-module'

Ioana Ciornei says:

====================
dpaa2-mac: add PCS support through the Lynx module

This patch set aims to add PCS support in the dpaa2-eth driver by
leveraging the Lynx PCS module.

The first two patches are some missing pieces: the first one adding
support for 10GBASER in Lynx PCS while the second one adds a new
function - of_mdio_find_device - which is helpful in retrieving the PCS
represented as a mdio_device.  The final patch adds the glue logic
between phylink and the Lynx PCS module: it retrieves the PCS
represented as an mdio_device and registers it to Lynx and phylink.
From that point on, any PCS callbacks are treated by Lynx, without
dpaa2-eth interaction.

Changes in v2:
 - move put_device() after destroy - 3/3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/dpaa2/Kconfig

@@ -3,6 +3,7 @@ config FSL_DPAA2_ETH
 	tristate "Freescale DPAA2 Ethernet"
 	depends on FSL_MC_BUS && FSL_MC_DPIO
 	select PHYLINK
+	select PCS_LYNX
 	help
 	  This is the DPAA2 Ethernet driver supporting Freescale SoCs
 	  with DPAA2 (DataPath Acceleration Architecture v2).

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c

@@ -15,6 +15,18 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 	case DPMAC_ETH_IF_RGMII:
 		*if_mode = PHY_INTERFACE_MODE_RGMII;
 		break;
+	case DPMAC_ETH_IF_USXGMII:
+		*if_mode = PHY_INTERFACE_MODE_USXGMII;
+		break;
+	case DPMAC_ETH_IF_QSGMII:
+		*if_mode = PHY_INTERFACE_MODE_QSGMII;
+		break;
+	case DPMAC_ETH_IF_SGMII:
+		*if_mode = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case DPMAC_ETH_IF_XFI:
+		*if_mode = PHY_INTERFACE_MODE_10GBASER;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -67,6 +79,10 @@ static bool dpaa2_mac_phy_mode_mismatch(struct dpaa2_mac *mac,
 					phy_interface_t interface)
 {
 	switch (interface) {
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_USXGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -95,6 +111,17 @@ static void dpaa2_mac_validate(struct phylink_config *config,
 	phylink_set(mask, Asym_Pause);
 
 	switch (state->interface) {
+	case PHY_INTERFACE_MODE_NA:
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_USXGMII:
+		phylink_set(mask, 10000baseT_Full);
+		if (state->interface == PHY_INTERFACE_MODE_10GBASER)
+			break;
+		phylink_set(mask, 5000baseT_Full);
+		phylink_set(mask, 2500baseT_Full);
+		fallthrough;
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -227,6 +254,52 @@ bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
 	return fixed;
 }
 
+static int dpaa2_pcs_create(struct dpaa2_mac *mac,
+			    struct device_node *dpmac_node, int id)
+{
+	struct mdio_device *mdiodev;
+	struct device_node *node;
+
+	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
+	if (!node) {
+		/* do not error out on old DTS files */
+		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
+		return 0;
+	}
+
+	if (!of_device_is_available(node) ||
+	    !of_device_is_available(node->parent)) {
+		netdev_err(mac->net_dev, "pcs-handle node not available\n");
+		return -ENODEV;
+	}
+
+	mdiodev = of_mdio_find_device(node);
+	of_node_put(node);
+	if (!mdiodev)
+		return -EPROBE_DEFER;
+
+	mac->pcs = lynx_pcs_create(mdiodev);
+	if (!mac->pcs) {
+		netdev_err(mac->net_dev, "lynx_pcs_create() failed\n");
+		put_device(&mdiodev->dev);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
+{
+	struct lynx_pcs *pcs = mac->pcs;
+	struct device *dev = &pcs->mdio->dev;
+
+	if (pcs) {
+		lynx_pcs_destroy(pcs);
+		put_device(dev);
+		mac->pcs = NULL;
+	}
+}
+
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct fsl_mc_device *dpmac_dev = mac->mc_dev;
@@ -278,6 +351,13 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		goto err_put_node;
 	}
 
+	if (attr.link_type == DPMAC_LINK_TYPE_PHY &&
+	    attr.eth_if != DPMAC_ETH_IF_RGMII) {
+		err = dpaa2_pcs_create(mac, dpmac_node, attr.id);
+		if (err)
+			goto err_put_node;
+	}
+
 	mac->phylink_config.dev = &net_dev->dev;
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
@@ -286,10 +366,13 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);
-		goto err_put_node;
+		goto err_pcs_destroy;
 	}
 	mac->phylink = phylink;
 
+	if (mac->pcs)
+		phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
+
 	err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
 	if (err) {
 		netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
@@ -302,6 +385,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 
 err_phylink_destroy:
 	phylink_destroy(mac->phylink);
+err_pcs_destroy:
+	dpaa2_pcs_destroy(mac);
 err_put_node:
 	of_node_put(dpmac_node);
 err_close_dpmac:
@@ -316,6 +401,8 @@ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
 
 	phylink_disconnect_phy(mac->phylink);
 	phylink_destroy(mac->phylink);
+	dpaa2_pcs_destroy(mac);
+
 	dpmac_close(mac->mc_io, 0, mac->mc_dev->mc_handle);
 }
 

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h

@@ -7,6 +7,7 @@
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/phylink.h>
+#include <linux/pcs-lynx.h>
 
 #include "dpmac.h"
 #include "dpmac-cmd.h"
@@ -21,6 +22,7 @@ struct dpaa2_mac {
 	struct phylink *phylink;
 	phy_interface_t if_mode;
 	enum dpmac_link_type if_link_type;
+	struct lynx_pcs *pcs;
 };
 
 bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,

drivers/net/pcs/pcs-lynx.c

@@ -93,6 +93,9 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 	case PHY_INTERFACE_MODE_USXGMII:
 		lynx_pcs_get_state_usxgmii(lynx->mdio, state);
 		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		phylink_mii_c45_pcs_get_state(lynx->mdio, state);
+		break;
 	default:
 		break;
 	}
@@ -172,6 +175,9 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 		break;
 	case PHY_INTERFACE_MODE_USXGMII:
 		return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
+	case PHY_INTERFACE_MODE_10GBASER:
+		/* Nothing to do here for 10GBASER */
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}

drivers/of/of_mdio.c

@@ -337,6 +337,29 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 }
 EXPORT_SYMBOL(of_mdiobus_register);
 
+/**
+ * of_mdio_find_device - Given a device tree node, find the mdio_device
+ * @np: pointer to the mdio_device's device tree node
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use
+ */
+struct mdio_device *of_mdio_find_device(struct device_node *np)
+{
+	struct device *d;
+
+	if (!np)
+		return NULL;
+
+	d = bus_find_device_by_of_node(&mdio_bus_type, np);
+	if (!d)
+		return NULL;
+
+	return to_mdio_device(d);
+}
+EXPORT_SYMBOL(of_mdio_find_device);
+
 /**
  * of_phy_find_device - Give a PHY node, find the phy_device
  * @phy_np: Pointer to the phy's device tree node
@@ -346,19 +369,16 @@ EXPORT_SYMBOL(of_mdiobus_register);
  */
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
-	struct device *d;
 	struct mdio_device *mdiodev;
 
-	if (!phy_np)
+	mdiodev = of_mdio_find_device(phy_np);
+	if (!mdiodev)
 		return NULL;
 
-	d = bus_find_device_by_of_node(&mdio_bus_type, phy_np);
-	if (d) {
-		mdiodev = to_mdio_device(d);
-		if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
-			return to_phy_device(d);
-		put_device(d);
-	}
+	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+		return to_phy_device(&mdiodev->dev);
+
+	put_device(&mdiodev->dev);
 
 	return NULL;
 }

include/linux/of_mdio.h

@@ -17,6 +17,7 @@ bool of_mdiobus_child_is_phy(struct device_node *child);
 int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
 int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
 			     struct device_node *np);
+struct mdio_device *of_mdio_find_device(struct device_node *np);
 struct phy_device *of_phy_find_device(struct device_node *phy_np);
 struct phy_device *
 of_phy_connect(struct net_device *dev, struct device_node *phy_np,
@@ -74,6 +75,11 @@ static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *
 	return mdiobus_register(mdio);
 }
 
+static inline struct mdio_device *of_mdio_find_device(struct device_node *np)
+{
+	return NULL;
+}
+
 static inline struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
 	return NULL;