net: bcmasp: Add support for eee mode

Add support for eee mode.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/asp2/bcmasp.h

@@ -315,6 +315,8 @@ struct bcmasp_intf {
 	/* Used if per intf wol irq */
 	int				wol_irq;
 	unsigned int			wol_irq_enabled:1;
+
+	struct ethtool_eee		eee;
 };
 
 #define NUM_NET_FILTERS				32
@@ -558,4 +560,6 @@ void bcmasp_netfilt_get_all_active(struct bcmasp_intf *intf, u32 *rule_locs,
 				   u32 *rule_cnt);
 
 void bcmasp_netfilt_suspend(struct bcmasp_intf *intf);
+
+void bcmasp_eee_enable_set(struct bcmasp_intf *intf, bool enable);
 #endif

drivers/net/ethernet/broadcom/asp2/bcmasp_ethtool.c

@@ -191,6 +191,65 @@ static int bcmasp_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 	return err;
 }
 
+void bcmasp_eee_enable_set(struct bcmasp_intf *intf, bool enable)
+{
+	u32 reg;
+
+	reg = umac_rl(intf, UMC_EEE_CTRL);
+	if (enable)
+		reg |= EEE_EN;
+	else
+		reg &= ~EEE_EN;
+	umac_wl(intf, reg, UMC_EEE_CTRL);
+
+	intf->eee.eee_enabled = enable;
+	intf->eee.eee_active = enable;
+}
+
+static int bcmasp_get_eee(struct net_device *dev, struct ethtool_eee *e)
+{
+	struct bcmasp_intf *intf = netdev_priv(dev);
+	struct ethtool_eee *p = &intf->eee;
+
+	if (!dev->phydev)
+		return -ENODEV;
+
+	e->eee_enabled = p->eee_enabled;
+	e->eee_active = p->eee_active;
+	e->tx_lpi_enabled = p->tx_lpi_enabled;
+	e->tx_lpi_timer = umac_rl(intf, UMC_EEE_LPI_TIMER);
+
+	return phy_ethtool_get_eee(dev->phydev, e);
+}
+
+static int bcmasp_set_eee(struct net_device *dev, struct ethtool_eee *e)
+{
+	struct bcmasp_intf *intf = netdev_priv(dev);
+	struct ethtool_eee *p = &intf->eee;
+	int ret;
+
+	if (!dev->phydev)
+		return -ENODEV;
+
+	if (!p->eee_enabled) {
+		bcmasp_eee_enable_set(intf, false);
+	} else {
+		ret = phy_init_eee(dev->phydev, 0);
+		if (ret) {
+			netif_err(intf, hw, dev,
+				  "EEE initialization failed: %d\n", ret);
+			return ret;
+		}
+
+		umac_wl(intf, e->tx_lpi_timer, UMC_EEE_LPI_TIMER);
+		intf->eee.eee_active = ret >= 0;
+		intf->eee.tx_lpi_enabled = e->tx_lpi_enabled;
+		bcmasp_eee_enable_set(intf, true);
+	}
+
+	return phy_ethtool_set_eee(dev->phydev, e);
+}
+
 const struct ethtool_ops bcmasp_ethtool_ops = {
 	.get_drvinfo		= bcmasp_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
@@ -202,4 +261,6 @@ const struct ethtool_ops bcmasp_ethtool_ops = {
 	.set_wol		= bcmasp_set_wol,
 	.get_rxnfc		= bcmasp_get_rxnfc,
 	.set_rxnfc		= bcmasp_set_rxnfc,
+	.set_eee		= bcmasp_set_eee,
+	.get_eee		= bcmasp_get_eee,
 };

drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c

@@ -646,6 +646,9 @@ static void bcmasp_adj_link(struct net_device *dev)
 			UMC_CMD_TX_PAUSE_IGNORE);
 		reg |= cmd_bits;
 		umac_wl(intf, reg, UMC_CMD);
+
+		intf->eee.eee_active = phy_init_eee(phydev, 0) >= 0;
+		bcmasp_eee_enable_set(intf, intf->eee.eee_active);
 	}
 
 	reg = rgmii_rl(intf, RGMII_OOB_CNTRL);
@@ -1387,6 +1390,9 @@ int bcmasp_interface_resume(struct bcmasp_intf *intf)
 
 	bcmasp_resume_from_wol(intf);
 
+	if (intf->eee.eee_enabled)
+		bcmasp_eee_enable_set(intf, true);
+
 	netif_device_attach(dev);
 
 	return 0;