Merge v5.13-rc3 into drm-next

drm/i915 is extremely on fire without the below revert from -rc3: commit 293837b Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed May 19 05:55:57 2021 -1000 Revert "i915: fix remap_io_sg to verify the pgprot" Backmerge so we don't have a too wide bisect window for anything that's a more involved workload than booting the driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
mariux64 · May 27, 2021 · 5522e9f · 5522e9f
2 parents 9a91e5e + c468154
commit 5522e9f
Show file tree

Hide file tree

Showing 272 changed files with 2,095 additions and 1,341 deletions.
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -60,7 +60,6 @@ properties:
     maxItems: 2
 
   idt,xtal-load-femtofarads:
-    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 9000
     maximum: 22760
     description: Optional load capacitor for XTAL1 and XTAL2
@@ -84,7 +83,6 @@ patternProperties:
         enum: [ 1800000, 2500000, 3300000 ]
       idt,slew-percent:
         description: The Slew rate control for CMOS single-ended.
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [ 80, 85, 90, 100 ]
 
 required:

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -102,7 +102,6 @@ patternProperties:
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |

diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
@@ -38,6 +38,5 @@ properties:
       Duration in seconds which the key should be kept pressed for device to
       reset automatically. Device with key pressed reset feature can specify
       this property.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -92,7 +92,6 @@ properties:
       this interconnect to send RPMh commands.
 
   qcom,bcm-voter-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: |
       Names for each of the qcom,bcm-voters specified.
 

diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
 In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
 controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
-by hardware using this driver.
+as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
+or by hardware using this driver.
 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
 controlled, so the only chance to keep them working is by using this driver.

diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
 This controller is present on BCM6358 and BCM6368.
 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
 which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
 by hardware using this driver.
 
 Required properties:

diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -99,32 +99,26 @@ properties:
       Indicates that the channel acts as primary among the bonded channels.
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
     description:
-      Child port node corresponding to the data input, in accordance with the
-      video interface bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
-      The port node must contain at least one endpoint.
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
 
     properties:
       endpoint:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
 
         properties:
-          remote-endpoint:
-            description:
-              A phandle to the remote tuner endpoint subnode in remote node
-              port.
-
           sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [0, 1]
             description:
               Indicates sync signal polarity, 0/1 for low/high respectively.
               This property maps to SYNCAC bit in the hardware manual. The
               default is 1 (active high).
 
-        additionalProperties: false
-
 required:
   - compatible
   - reg

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -105,7 +105,6 @@ properties:
       - description: Whether the IPA clock is enabled (if valid)
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: ipa-clock-enabled-valid

diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
@@ -9,7 +9,6 @@ Required properties:
 	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
 	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
 	      "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
-	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
 - reg: Should contain registers location and length
 
 = Data cells =

diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -118,7 +118,7 @@ patternProperties:
         description:
           Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
           EXTERNAL_SSC or INTERNAL_SSC.
-          Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1, 2]
         default: 0

diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 1
 
   phys:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description: phandle to the USB phy
 
   monitored-battery:

diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -49,7 +49,7 @@ properties:
     maxItems: 1
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       phandle to a node describing reserved memory (System RAM memory)
       The M core can't access all the DDR memory space on some platform,

diff --git a/Documentation/powerpc/syscall64-abi.rst b/Documentation/powerpc/syscall64-abi.rst
@@ -109,6 +109,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1618,8 +1618,8 @@ F:	Documentation/devicetree/bindings/sound/amlogic*
 F:	sound/soc/meson/
 
 ARM/Amlogic Meson SoC support
+M:	Neil Armstrong <narmstrong@baylibre.com>
 M:	Kevin Hilman <khilman@baylibre.com>
-R:	Neil Armstrong <narmstrong@baylibre.com>
 R:	Jerome Brunet <jbrunet@baylibre.com>
 R:	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -12195,6 +12195,7 @@ F:	drivers/platform/surface/surfacepro3_button.c
 
 MICROSOFT SURFACE SYSTEM AGGREGATOR SUBSYSTEM
 M:	Maximilian Luz <luzmaximilian@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 W:	https://github.com/linux-surface/surface-aggregator-module
 C:	irc://chat.freenode.net/##linux-surface
@@ -14749,7 +14750,6 @@ W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/prism54/
 
 PROC FILESYSTEM
-R:	Alexey Dobriyan <adobriyan@gmail.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained

diff --git a/Makefile b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Frozen Wasteland
 
 # *DOCUMENTATION*

diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -482,7 +482,7 @@
 550	common	process_madvise			sys_process_madvise
 551	common	epoll_pwait2			sys_epoll_pwait2
 552	common	mount_setattr			sys_mount_setattr
-553	common	quotactl_path			sys_quotactl_path
+# 553 reserved for quotactl_path
 554	common	landlock_create_ruleset		sys_landlock_create_ruleset
 555	common	landlock_add_rule		sys_landlock_add_rule
 556	common	landlock_restrict_self		sys_landlock_restrict_self
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
@@ -10,6 +10,7 @@ config ARCH_WPCM450
 	bool "Support for WPCM450 BMC (Hermon)"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select WPCM450_AIC
 	select NPCM7XX_TIMER
 	help
 	  General support for WPCM450 BMC (Hermon).

diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -121,8 +121,13 @@ static int cplds_probe(struct platform_device *pdev)
 		return fpga->irq;
 
 	base_irq = platform_get_irq(pdev, 1);
-	if (base_irq < 0)
+	if (base_irq < 0) {
 		base_irq = 0;
+	} else {
+		ret = devm_irq_alloc_descs(&pdev->dev, base_irq, base_irq, CPLDS_NB_IRQ, 0);
+		if (ret < 0)
+			return ret;
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	fpga->base = devm_ioremap_resource(&pdev->dev, res);

diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
@@ -456,7 +456,7 @@
 440	common	process_madvise			sys_process_madvise
 441	common	epoll_pwait2			sys_epoll_pwait2
 442	common	mount_setattr			sys_mount_setattr
-443	common	quotactl_path			sys_quotactl_path
+# 443 reserved for quotactl_path
 444	common	landlock_create_ruleset		sys_landlock_create_ruleset
 445	common	landlock_add_rule		sys_landlock_add_rule
 446	common	landlock_restrict_self		sys_landlock_restrict_self
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
@@ -14,7 +14,6 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			csi20_in: endpoint {
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
@@ -29,7 +28,6 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			csi40_in: endpoint {
 				clock-lanes = <0>;
 				data-lanes = <1 2>;

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2573,6 +2573,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -2628,6 +2632,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2419,6 +2419,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -2474,6 +2478,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
@@ -33,7 +33,7 @@
 	status = "okay";
 
 	ports {
-		port {
+		port@0 {
 			csi40_in: endpoint {
 				clock-lanes = <0>;
 				data-lanes = <1 2>;

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1823,6 +1823,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -2709,6 +2709,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -2764,6 +2768,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -192,6 +192,10 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			port@0 {
+				reg = <0>;
+			};
+
 			port@1 {
 				#address-cells = <1>;
 				#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3097,6 +3097,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3152,6 +3156,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3191,6 +3199,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+				};
+
 				port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;