ARM: dts: Fix more boolean properties with values

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/at91-sam9_l9260.dts

@@ -101,7 +101,7 @@
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+			nand-on-flash-bbt;
 			status = "okay";
 		};
 

arch/arm/boot/dts/imx28-ts4600.dts

@@ -26,7 +26,7 @@
 				pinctrl-0 = <&mmc0_4bit_pins_a
 					     &mmc0_sck_cfg
 					     &en_sd_pwr>;
-				broken-cd = <1>;
+				broken-cd;
 				bus-width = <4>;
 				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";

arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi

@@ -118,8 +118,8 @@
 		gpmc,device-width = <2>;
 		gpmc,wait-pin = <0>;
 		gpmc,burst-length = <4>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <45>;
 		gpmc,cs-wr-off-ns = <45>;

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -972,7 +972,7 @@
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -996,7 +996,7 @@
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1020,7 +1020,7 @@
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1044,7 +1044,7 @@
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;