Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts!

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/ABI/stable/sysfs-driver-dma-idxd

@@ -128,6 +128,8 @@ Date:		Aug 28, 2020
 KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The last executed device administrative command's status/error.
+		Also last configuration error overloaded.
+		Writing to it will clear the status.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
 Date:		Oct 27, 2020
@@ -211,6 +213,13 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicate whether ATS disable is turned on for the workqueue.
 		0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/occupancy
+Date		May 25, 2021
+KernelVersion:	5.14.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the current number of entries in this WQ if WQ Occupancy
+		Support bit WQ capabilities is 1.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -215,6 +215,17 @@ Description:    Sets the skip reset on timeout option for the device. Value of
                 "0" means device will be reset in case some CS has timed out,
                 otherwise it will not be reset.
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/state_dump
+Date:           Oct 2021
+KernelVersion:  5.15
+Contact:        ynudelman@habana.ai
+Description:    Gets the state dump occurring on a CS timeout or failure.
+                State dump is used for debug and is created each time in case of
+                a problem in a CS execution, before reset.
+                Reading from the node returns the newest state dump available.
+                Writing an integer X discards X state dumps, so that the
+                next read would return X+1-st newest state dump.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
 Date:           Mar 2020
 KernelVersion:  5.6
@@ -230,6 +241,14 @@ Description:    Displays a list with information about the currently user
                 pointers (user virtual addresses) that are pinned and mapped
                 to DMA addresses
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
+Date:           Aug 2021
+KernelVersion:  5.15
+Contact:        ogabbay@kernel.org
+Description:    Allows to search for specific user pointers (user virtual
+                addresses) that are pinned and mapped to DMA addresses, and see
+                their resolution to the specific dma address.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/vm
 Date:           Jan 2019
 KernelVersion:  5.1

Documentation/ABI/testing/sysfs-bus-pci

@@ -121,6 +121,23 @@ Description:
 		child buses, and re-discover devices removed earlier
 		from this part of the device tree.
 
+What:		/sys/bus/pci/devices/.../reset_method
+Date:		August 2021
+Contact:	Amey Narkhede <ameynarkhede03@gmail.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same slot.
+
+		For devices that have this support, a file named
+		reset_method is present in sysfs.  Reading this file
+		gives names of the supported and enabled reset methods and
+		their ordering.  Writing a space-separated list of names of
+		reset methods sets the reset methods and ordering to be
+		used when resetting the device.  Writing an empty string
+		disables the ability to reset the device.  Writing
+		"default" enables all supported reset methods in the
+		default ordering.
+
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009
 Contact:	Michael S. Tsirkin <mst@redhat.com>

Documentation/PCI/endpoint/pci-endpoint-cfs.rst

@@ -43,6 +43,7 @@ entries corresponding to EPF driver will be created by the EPF core.
 		.. <EPF Driver1>/
 			... <EPF Device 11>/
 			... <EPF Device 21>/
+			... <EPF Device 31>/
 		.. <EPF Driver2>/
 			... <EPF Device 12>/
 			... <EPF Device 22>/
@@ -68,6 +69,7 @@ created)
 				... subsys_vendor_id
 				... subsys_id
 				... interrupt_pin
+			        ... <Symlink EPF Device 31>/
                                 ... primary/
 			                ... <Symlink EPC Device1>/
                                 ... secondary/
@@ -79,6 +81,13 @@ interface should be added in 'primary' directory and symlink of endpoint
 controller connected to secondary interface should be added in 'secondary'
 directory.
 
+The <EPF Device> directory can have a list of symbolic links
+(<Symlink EPF Device 31>) to other <EPF Device>. These symbolic links should
+be created by the user to represent the virtual functions that are bound to
+the physical function. In the above directory structure <EPF Device 11> is a
+physical function and <EPF Device 31> is a virtual function. An EPF device once
+it's linked to another EPF device, cannot be linked to a EPC device.
+
 EPC Device
 ==========
 
@@ -98,7 +107,8 @@ entries corresponding to EPC device will be created by the EPC core.
 
 The <EPC Device> directory will have a list of symbolic links to
 <EPF Device>. These symbolic links should be created by the user to
-represent the functions present in the endpoint device.
+represent the functions present in the endpoint device. Only <EPF Device>
+that represents a physical function can be linked to a EPC device.
 
 The <EPC Device> directory will also have a *start* field. Once
 "1" is written to this field, the endpoint device will be ready to

Documentation/admin-guide/README.rst

@@ -259,7 +259,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 4.9 available.
+ - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
    Please note that you can still run a.out user programs with this kernel.

Documentation/admin-guide/acpi/ssdt-overlays.rst

@@ -30,22 +30,21 @@ following ASL code can be used::
         {
             Device (STAC)
             {
-                Name (_ADR, Zero)
                 Name (_HID, "BMA222E")
+                Name (RBUF, ResourceTemplate ()
+                {
+                    I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
+                                AddressingMode7Bit, "\\_SB.I2C6", 0x00,
+                                ResourceConsumer, ,)
+                    GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
+                            "\\_SB.GPO2", 0x00, ResourceConsumer, , )
+                    { // Pin list
+                        0
+                    }
+                })
 
                 Method (_CRS, 0, Serialized)
                 {
-                    Name (RBUF, ResourceTemplate ()
-                    {
-                        I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
-                                    AddressingMode7Bit, "\\_SB.I2C6", 0x00,
-                                    ResourceConsumer, ,)
-                        GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
-                                "\\_SB.GPO2", 0x00, ResourceConsumer, , )
-                        { // Pin list
-                            0
-                        }
-                    })
                     Return (RBUF)
                 }
             }
@@ -75,7 +74,7 @@ This option allows loading of user defined SSDTs from initrd and it is useful
 when the system does not support EFI or when there is not enough EFI storage.
 
 It works in a similar way with initrd based ACPI tables override/upgrade: SSDT
-aml code must be placed in the first, uncompressed, initrd under the
+AML code must be placed in the first, uncompressed, initrd under the
 "kernel/firmware/acpi" path. Multiple files can be used and this will translate
 in loading multiple tables. Only SSDT and OEM tables are allowed. See
 initrd_table_override.txt for more details.
@@ -103,12 +102,14 @@ This is the preferred method, when EFI is supported on the platform, because it
 allows a persistent, OS independent way of storing the user defined SSDTs. There
 is also work underway to implement EFI support for loading user defined SSDTs
 and using this method will make it easier to convert to the EFI loading
-mechanism when that will arrive.
+mechanism when that will arrive. To enable it, the
+CONFIG_EFI_CUSTOM_SSDT_OVERLAYS shoyld be chosen to y.
 
-In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line
-parameter can be used. The argument for the option is the variable name to
-use. If there are multiple variables with the same name but with different
-vendor GUIDs, all of them will be loaded.
+In order to load SSDTs from an EFI variable the ``"efivar_ssdt=..."`` kernel
+command line parameter can be used (the name has a limitation of 16 characters).
+The argument for the option is the variable name to use. If there are multiple
+variables with the same name but with different vendor GUIDs, all of them will
+be loaded.
 
 In order to store the AML code in an EFI variable the efivarfs filesystem can be
 used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all
@@ -127,7 +128,7 @@ variable with the content from a given file::
 
     #!/bin/sh -e
 
-    while ! [ -z "$1" ]; do
+    while [ -n "$1" ]; do
             case "$1" in
             "-f") filename="$2"; shift;;
             "-g") guid="$2"; shift;;
@@ -167,14 +168,14 @@ variable with the content from a given file::
 Loading ACPI SSDTs from configfs
 ================================
 
-This option allows loading of user defined SSDTs from userspace via the configfs
+This option allows loading of user defined SSDTs from user space via the configfs
 interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be
 mounted. In the following examples, we assume that configfs has been mounted in
-/config.
+/sys/kernel/config.
 
-New tables can be loading by creating new directories in /config/acpi/table/ and
-writing the SSDT aml code in the aml attribute::
+New tables can be loading by creating new directories in /sys/kernel/config/acpi/table
+and writing the SSDT AML code in the aml attribute::
 
-    cd /config/acpi/table
+    cd /sys/kernel/config/acpi/table
     mkdir my_ssdt
     cat ~/ssdt.aml > my_ssdt/aml

Documentation/admin-guide/bootconfig.rst

@@ -178,7 +178,7 @@ update the boot loader and the kernel image itself as long as the boot
 loader passes the correct initrd file size. If by any chance, the boot
 loader passes a longer size, the kernel fails to find the bootconfig data.
 
-To do this operation, Linux kernel provides "bootconfig" command under
+To do this operation, Linux kernel provides ``bootconfig`` command under
 tools/bootconfig, which allows admin to apply or delete the config file
 to/from initrd image. You can build it by the following command::
 
@@ -196,6 +196,43 @@ To remove the config from the image, you can use -d option as below::
 Then add "bootconfig" on the normal kernel command line to tell the
 kernel to look for the bootconfig at the end of the initrd file.
 
+
+Kernel parameters via Boot Config
+=================================
+
+In addition to the kernel command line, the boot config can be used for
+passing the kernel parameters. All the key-value pairs under ``kernel``
+key will be passed to kernel cmdline directly. Moreover, the key-value
+pairs under ``init`` will be passed to init process via the cmdline.
+The parameters are concatinated with user-given kernel cmdline string
+as the following order, so that the command line parameter can override
+bootconfig parameters (this depends on how the subsystem handles parameters
+but in general, earlier parameter will be overwritten by later one.)::
+
+ [bootconfig params][cmdline params] -- [bootconfig init params][cmdline init params]
+
+Here is an example of the bootconfig file for kernel/init parameters.::
+
+ kernel {
+   root = 01234567-89ab-cdef-0123-456789abcd
+ }
+ init {
+  splash
+ }
+
+This will be copied into the kernel cmdline string as the following::
+
+ root="01234567-89ab-cdef-0123-456789abcd" -- splash
+
+If user gives some other command line like,::
+
+ ro bootconfig -- quiet
+
+The final kernel cmdline will be the following::
+
+ root="01234567-89ab-cdef-0123-456789abcd" ro bootconfig -- splash quiet
+
+
 Config File Limitation
 ======================
 

Documentation/admin-guide/kernel-parameters.txt

@@ -1758,6 +1758,11 @@
 			support for the idxd driver. By default it is set to
 			true (1).
 
+	idxd.tc_override= [HW]
+			Format: <bool>
+			Allow override of default traffic class configuration
+			for the device. By default it is set to false (0).
+
 	ieee754=	[MIPS] Select IEEE Std 754 conformance mode
 			Format: { strict | legacy | 2008 | relaxed }
 			Default: strict

Documentation/admin-guide/mm/damon/index.rst

@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Monitoring Data Accesses
+========================
+
+:doc:`DAMON </vm/damon/index>` allows light-weight data access monitoring.
+Using DAMON, users can analyze the memory access patterns of their systems and
+optimize those.
+
+.. toctree::
+   :maxdepth: 2
+
+   start
+   usage