Merge remote-tracking branch 'asoc/topic/tlv320aic31xx' into asoc-next

Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

@@ -0,0 +1,61 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+
+- reg - <int> -  I2C slave address
+
+
+Optional properties:
+
+- gpio-reset - gpio pin number used for codec reset
+- ai31xx-micbias-vg - MicBias Voltage setting
+        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+	If this node is not mentioned or if the value is unknown, then
+	micbias	is set to 2.0V.
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+CODEC output pins:
+  * HPL
+  * HPR
+  * SPL, devices with stereo speaker amp
+  * SPR, devices with stereo speaker amp
+  * SPK, devices with mono speaker amp
+  * MICBIAS
+
+CODEC input pins:
+  * MIC1LP
+  * MIC1RP
+  * MIC1LM
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+tlv320aic31xx: tlv320aic31xx@18 {
+	compatible = "ti,tlv320aic311x";
+	reg = <0x18>;
+
+	ai31xx-micbias-vg = <MICBIAS_OFF>;
+
+	HPVDD-supply = <&regulator>;
+	SPRVDD-supply = <&regulator>;
+	SPLVDD-supply = <&regulator>;
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
+};

include/dt-bindings/sound/tlv320aic31xx-micbias.h

@@ -0,0 +1,8 @@
+#ifndef __DT_TLV320AIC31XX_MICBIAS_H
+#define __DT_TLV320AIC31XX_MICBIAS_H
+
+#define MICBIAS_2_0V		1
+#define MICBIAS_2_5V		2
+#define MICBIAS_AVDDV		3
+
+#endif /* __DT_TLV320AIC31XX_MICBIAS_H */

sound/soc/codecs/Kconfig

@@ -85,6 +85,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_TLV320AIC23_I2C if I2C
 	select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
+	select SND_SOC_TLV320AIC31XX if I2C
 	select SND_SOC_TLV320AIC32X4 if I2C
 	select SND_SOC_TLV320AIC3X if I2C
 	select SND_SOC_TPA6130A2 if I2C
@@ -449,6 +450,9 @@ config SND_SOC_TLV320AIC26
 	tristate
 	depends on SPI
 
+config SND_SOC_TLV320AIC31XX
+        tristate
+
 config SND_SOC_TLV320AIC32X4
 	tristate
 

sound/soc/codecs/Makefile

@@ -79,6 +79,7 @@ snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
 snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
+snd-soc-tlv320aic31xx-objs := tlv320aic31xx.o
 snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 snd-soc-tlv320dac33-objs := tlv320dac33.o
@@ -223,6 +224,7 @@ obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C)	+= snd-soc-tlv320aic23-i2c.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI)	+= snd-soc-tlv320aic23-spi.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
+obj-$(CONFIG_SND_SOC_TLV320AIC31XX)     += snd-soc-tlv320aic31xx.o
 obj-$(CONFIG_SND_SOC_TLV320AIC32X4)     += snd-soc-tlv320aic32x4.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
 obj-$(CONFIG_SND_SOC_TLV320DAC33)	+= snd-soc-tlv320dac33.o