Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Fix autoloading of fschmd on recent Fujitsu machines
  hwmon: (coretemp) Properly label the sensors
  hwmon: (coretemp) Skip duplicate CPU entries
  hwmon: (it87) Fix in7 on IT8720F
  hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions

drivers/hwmon/coretemp.c

@@ -53,6 +53,7 @@ struct coretemp_data {
 	struct mutex update_lock;
 	const char *name;
 	u32 id;
+	u16 core_id;
 	char valid;		/* zero until following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
 	int temp;
@@ -75,7 +76,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 	if (attr->index == SHOW_NAME)
 		ret = sprintf(buf, "%s\n", data->name);
 	else	/* show label */
-		ret = sprintf(buf, "Core %d\n", data->id);
+		ret = sprintf(buf, "Core %d\n", data->core_id);
 	return ret;
 }
 
@@ -304,6 +305,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	}
 
 	data->id = pdev->id;
+#ifdef CONFIG_SMP
+	data->core_id = c->cpu_core_id;
+#endif
 	data->name = "coretemp";
 	mutex_init(&data->update_lock);
 
@@ -405,6 +409,10 @@ struct pdev_entry {
 	struct list_head list;
 	struct platform_device *pdev;
 	unsigned int cpu;
+#ifdef CONFIG_SMP
+	u16 phys_proc_id;
+	u16 cpu_core_id;
+#endif
 };
 
 static LIST_HEAD(pdev_list);
@@ -415,6 +423,22 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+	mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+	/* Skip second HT entry of each core */
+	list_for_each_entry(pdev_entry, &pdev_list, list) {
+		if (c->phys_proc_id == pdev_entry->phys_proc_id &&
+		    c->cpu_core_id == pdev_entry->cpu_core_id) {
+			err = 0;	/* Not an error */
+			goto exit;
+		}
+	}
+#endif
 
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
@@ -438,7 +462,10 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 
 	pdev_entry->pdev = pdev;
 	pdev_entry->cpu = cpu;
-	mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+	pdev_entry->phys_proc_id = c->phys_proc_id;
+	pdev_entry->cpu_core_id = c->cpu_core_id;
+#endif
 	list_add_tail(&pdev_entry->list, &pdev_list);
 	mutex_unlock(&pdev_list_mutex);
 
@@ -449,6 +476,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 exit_device_put:
 	platform_device_put(pdev);
 exit:
+	mutex_unlock(&pdev_list_mutex);
 	return err;
 }
 

drivers/hwmon/it87.c

@@ -80,6 +80,13 @@ superio_inb(int reg)
 	return inb(VAL);
 }
 
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
 static int superio_inw(int reg)
 {
 	int val;
@@ -1517,6 +1524,21 @@ static int __init it87_find(unsigned short *address,
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
+		/*
+		 * The IT8720F has no VIN7 pin, so VCCH should always be
+		 * routed internally to VIN7 with an internal divider.
+		 * Curiously, there still is a configuration bit to control
+		 * this, which means it can be set incorrectly. And even
+		 * more curiously, many boards out there are improperly
+		 * configured, even though the IT8720F datasheet claims
+		 * that the internal routing of VCCH to VIN7 is the default
+		 * setting. So we force the internal routing in this case.
+		 */
+		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+			reg |= (1 << 1);
+			superio_outb(IT87_SIO_PINX2_REG, reg);
+			pr_notice("it87: Routing internal VCCH to in7\n");
+		}
 		if (reg & (1 << 0))
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))

drivers/hwmon/k8temp.c

@@ -180,11 +180,13 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 		}
 
 		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
+		      model == 0x6b || model == 0x6f || model == 0x7f)) {
 			/*
-			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
-			 * need additional offset, otherwise reported
-			 * temperature is below ambient temperature
+			 * RevG desktop CPUs (i.e. no socket S1G1 or
+			 * ASB1 parts) need additional offset,
+			 * otherwise reported temperature is below
+			 * ambient temperature
 			 */
 			data->temp_offset = 21000;
 		}

drivers/i2c/busses/i2c-i801.c

@@ -655,7 +655,7 @@ static void __devinit dmi_check_onboard_device(u8 type, const char *name,
 		/* & ~0x80, ignore enabled/disabled bit */
 		if ((type & ~0x80) != dmi_devices[i].type)
 			continue;
-		if (strcmp(name, dmi_devices[i].name))
+		if (strcasecmp(name, dmi_devices[i].name))
 			continue;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
@@ -704,9 +704,6 @@ static int __devinit i801_probe(struct pci_dev *dev,
 {
 	unsigned char temp;
 	int err, i;
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	const char *vendor;
-#endif
 
 	I801_dev = dev;
 	i801_features = 0;
@@ -808,8 +805,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
 	}
 #endif
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-	if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
+	if (dmi_name_in_vendors("FUJITSU"))
 		dmi_walk(dmi_check_onboard_devices, &i801_adapter);
 #endif