net/mlx5: Introduce new uplink destination type

The uplink destination type should be used in rules to steer the
packet to the uplink when the device is in steering based LAG mode.

Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c

@@ -235,6 +235,9 @@ const char *parse_fs_dst(struct trace_seq *p,
 	const char *ret = trace_seq_buffer_ptr(p);
 
 	switch (dst->type) {
+	case MLX5_FLOW_DESTINATION_TYPE_UPLINK:
+		trace_seq_printf(p, "uplink\n");
+		break;
 	case MLX5_FLOW_DESTINATION_TYPE_VPORT:
 		trace_seq_printf(p, "vport=%u\n", dst->vport.num);
 		break;

drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c

@@ -577,15 +577,21 @@ static int mlx5_cmd_set_fte(struct mlx5_core_dev *dev,
 			case MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE:
 				id = dst->dest_attr.ft->id;
 				break;
+			case MLX5_FLOW_DESTINATION_TYPE_UPLINK:
 			case MLX5_FLOW_DESTINATION_TYPE_VPORT:
-				id = dst->dest_attr.vport.num;
 				MLX5_SET(dest_format_struct, in_dests,
 					 destination_eswitch_owner_vhca_id_valid,
 					 !!(dst->dest_attr.vport.flags &
 					    MLX5_FLOW_DEST_VPORT_VHCA_ID));
 				MLX5_SET(dest_format_struct, in_dests,
 					 destination_eswitch_owner_vhca_id,
 					 dst->dest_attr.vport.vhca_id);
+				if (type == MLX5_FLOW_DESTINATION_TYPE_UPLINK) {
+					/* destination_id is reserved */
+					id = 0;
+					break;
+				}
+				id = dst->dest_attr.vport.num;
 				if (extended_dest &&
 				    dst->dest_attr.vport.pkt_reformat) {
 					MLX5_SET(dest_format_struct, in_dests,

include/linux/mlx5/mlx5_ifc.h

@@ -1766,6 +1766,7 @@ enum mlx5_flow_destination_type {
 	MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE   = 0x1,
 	MLX5_FLOW_DESTINATION_TYPE_TIR          = 0x2,
 	MLX5_FLOW_DESTINATION_TYPE_FLOW_SAMPLER = 0x6,
+	MLX5_FLOW_DESTINATION_TYPE_UPLINK       = 0x8,
 
 	MLX5_FLOW_DESTINATION_TYPE_PORT         = 0x99,
 	MLX5_FLOW_DESTINATION_TYPE_COUNTER      = 0x100,