Merge commit '4cb38750d49010ae72e718d46605ac9ba5a851b4' into stable/f…

…or-linus-3.6

* commit '4cb38750d49010ae72e718d46605ac9ba5a851b4': (6849 commits)
  bcma: fix invalid PMU chip control masks
  [libata] pata_cmd64x: whitespace cleanup
  libata-acpi: fix up for acpi_pm_device_sleep_state API
  sata_dwc_460ex: device tree may specify dma_channel
  ahci, trivial: fixed coding style issues related to braces
  ahci_platform: add hibernation callbacks
  libata-eh.c: local functions should not be exposed globally
  libata-transport.c: local functions should not be exposed globally
  sata_dwc_460ex: support hardreset
  ata: use module_pci_driver
  drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
  pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
  ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
  [libata] Prevent interface errors with Seagate FreeAgent GoFlex
  drivers/acpi/glue: revert accidental license-related 6b66d95 bits
  libata-acpi: add missing inlines in libata.h
  i2c-omap: Add support for I2C_M_STOP message flag
  i2c: Fall back to emulated SMBus if the operation isn't supported natively
  i2c: Add SCCB support
  i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter
  ...

.mailmap

@@ -111,6 +111,7 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/stable/sysfs-driver-w1_ds28e04

@@ -0,0 +1,15 @@
+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100

Documentation/ABI/stable/vdso

@@ -24,4 +24,4 @@ though.
 
 (As of this writing, this ABI documentation as been confirmed for x86_64.
  The maintainers of the other vDSO-using architectures should confirm
- that it is correct for their architecture.)
+ that it is correct for their architecture.)

Documentation/ABI/testing/dev-kmsg

@@ -58,33 +58,44 @@ Description:	The /dev/kmsg character device node provides userspace access
 
 		The output format consists of a prefix carrying the syslog
 		prefix including priority and facility, the 64 bit message
-		sequence number and the monotonic timestamp in microseconds.
-		The values are separated by a ','. Future extensions might
-		add more comma separated values before the terminating ';'.
-		Unknown values should be gracefully ignored.
+		sequence number and the monotonic timestamp in microseconds,
+		and a flag field. All fields are separated by a ','.
+
+		Future extensions might add more comma separated values before
+		the terminating ';'. Unknown fields and values should be
+		gracefully ignored.
 
 		The human readable text string starts directly after the ';'
 		and is terminated by a '\n'. Untrusted values derived from
 		hardware or other facilities are printed, therefore
-		all non-printable characters in the log message are escaped
-		by "\x00" C-style hex encoding.
+		all non-printable characters and '\' itself in the log message
+		are escaped by "\x00" C-style hex encoding.
 
 		A line starting with ' ', is a continuation line, adding
 		key/value pairs to the log message, which provide the machine
 		readable context of the message, for reliable processing in
 		userspace.
 
 		Example:
-		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
 		 SUBSYSTEM=acpi
 		 DEVICE=+acpi:PNP0A03:00
-		6,339,5140900;NET: Registered protocol family 10
-		30,340,5690716;udevd[80]: starting version 181
+		6,339,5140900,-;NET: Registered protocol family 10
+		30,340,5690716,-;udevd[80]: starting version 181
 
 		The DEVICE= key uniquely identifies devices the following way:
 		  b12:8        - block dev_t
 		  c127:3       - char dev_t
 		  n8           - netdev ifindex
 		  +sound:card0 - subsystem:devname
 
+		The flags field carries '-' by default. A 'c' indicates a
+		fragment of a line. All following fragments are flagged with
+		'+'. Note, that these hints about continuation lines are not
+		neccessarily correct, and the stream could be interleaved with
+		unrelated messages, but merging the lines in the output
+		usually produces better human readable results. A similar
+		logic is used internally when messages are printed to the
+		console, /proc/kmsg or the syslog() syscall.
+
 Users:		dmesg(1), userspace kernel log consumers

Documentation/ABI/testing/sysfs-block-rssd

@@ -1,26 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-                    - Allocated
-                    - Commands in Q
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
 Description:    This is a read-only file. Indicates the status of the device.
-
-What:           /sys/block/rssd*/flags
-Date:           May 2012
-KernelVersion:  3.5
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps the flags in port and driver
-                data structure

Documentation/ABI/testing/sysfs-block-zram

@@ -96,4 +96,4 @@ Description:
 		overhead, allocated for this disk. So, allocator space
 		efficiency can be calculated using compr_data_size and this
 		statistic.
-		Unit: bytes
+		Unit: bytes

Documentation/ABI/testing/sysfs-bus-iio

@@ -40,9 +40,9 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Some devices have internal clocks.  This parameter sets the
 		resulting sampling frequency.  In many devices this
-		parameter has an effect on input filters etc rather than
+		parameter has an effect on input filters etc. rather than
 		simply controlling when the input is sampled.  As this
-		effects datardy triggers, hardware buffers and the sysfs
+		effects data ready triggers, hardware buffers and the sysfs
 		direct access interfaces, it may be found in any of the
 		relevant directories.  If it effects all of the above
 		then it is to be found in the base device directory.
@@ -74,7 +74,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no bias removal etc) voltage measurement from
+		Raw (unscaled no bias removal etc.) voltage measurement from
 		channel Y. In special cases where the channel does not
 		correspond to externally available input one of the named
 		versions may be used. The number must always be specified and
@@ -118,11 +118,11 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_temp_z_raw
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no bias removal etc) temperature measurement.
+		Raw (unscaled no bias removal etc.) temperature measurement.
 		If an axis is specified it generally means that the temperature
 		sensor is associated with one part of a compound device (e.g.
 		a gyroscope axis). Units after application of scale and offset
-		are milli degrees Celsuis.
+		are milli degrees Celsius.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
 KernelVersion:	2.6.38
@@ -148,10 +148,9 @@ KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Angular velocity about axis x, y or z (may be arbitrarily
-		assigned) Data converted by application of offset then scale to
-		radians per second. Has all the equivalent parameters as
-		per voltageY. Units after application of scale and offset are
-		radians per second.
+		assigned). Has all the equivalent parameters as	per voltageY.
+		Units after application of scale and offset are	radians per
+		second.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
@@ -161,7 +160,7 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Inclination raw reading about axis x, y or z (may be
 		arbitrarily assigned). Data converted by application of offset
-		and scale to Degrees.
+		and scale to degrees.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
@@ -203,7 +202,7 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		If known for a device, offset to be added to <type>[Y]_raw prior
 		to scaling by <type>[Y]_scale in order to obtain value in the
-		<type> units as specified in <type>[y]_raw documentation.
+		<type> units as specified in <type>[Y]_raw documentation.
 		Not present if the offset is always 0 or unknown. If Y or
 		axis <x|y|z> is not present, then the offset applies to all
 		in channels of <type>.
@@ -219,6 +218,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -248,7 +248,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Hardware applied calibration offset. (assumed to fix production
+		Hardware applied calibration offset (assumed to fix production
 		inaccuracies).
 
 What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
@@ -265,19 +265,20 @@ what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Hardware applied calibration scale factor. (assumed to fix
+		Hardware applied calibration scale factor (assumed to fix
 		production inaccuracies).  If shared across all channels,
 		<type>_calibscale is used.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
-KernelVersion:	2.635
+KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		If a discrete set of scale values are available, they
+		If a discrete set of scale values is available, they
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
@@ -298,14 +299,19 @@ Description:
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -316,20 +322,26 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the output powerdown mode.
 		DAC output stage is disconnected from the amplifier and
-		1kohm_to_gnd: connected to ground via an 1kOhm resistor
-		100kohm_to_gnd: connected to ground via an 100kOhm resistor
-		three_state: left floating
+		1kohm_to_gnd: connected	to ground via an 1kOhm resistor,
+		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
+		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		three_state: left floating.
 		For a list of available output power down options read
 		outX_powerdown_mode_available. If Y is not present the
 		mode is shared across all outputs.
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -338,13 +350,34 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Writing 1 causes output Y to enter the power down mode specified
-		by the corresponding outY_powerdown_mode. Clearing returns to
-		normal operation. Y may be suppressed if all outputs are
-		controlled together.
+		by the corresponding outY_powerdown_mode. DAC output stage is
+		disconnected from the amplifier. Clearing returns to normal
+		operation. Y may be suppressed if all outputs are controlled
+		together.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
 
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
@@ -390,12 +423,12 @@ Description:
 		different values, but the device can only enable both thresholds
 		or neither.
 		Note the driver will assume the last p events requested are
-		to be enabled where p is however many it supports (which may
-		vary depending on the exact set requested. So if you want to be
+		to be enabled where p is how many it supports (which may vary
+		depending on the exact set requested. So if you want to be
 		sure you have set what you think you have, check the contents of
 		these attributes after everything is configured. Drivers may
 		have to buffer any parameters so that they are consistent when
-		a given event type is enabled a future point (and not those for
+		a given event type is enabled at a future point (and not those for
 		whatever event was previously enabled).
 
 What:		/sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
@@ -671,7 +704,7 @@ What:		/sys/.../buffer/scan_elements/in_anglvel_type
 What:		/sys/.../buffer/scan_elements/in_magn_type
 What:		/sys/.../buffer/scan_elements/in_incli_type
 What:		/sys/.../buffer/scan_elements/in_voltageY_type
-What:		/sys/.../buffer/scan_elements/in_voltage-in_type
+What:		/sys/.../buffer/scan_elements/in_voltage_type
 What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
 What:		/sys/.../buffer/scan_elements/in_timestamp_type
 KernelVersion:	2.6.37
@@ -692,7 +725,7 @@ Description:
 		the buffer output value appropriately.  The storagebits value
 		also specifies the data alignment.  So s48/64>>2 will be a
 		signed 48 bit integer stored in a 64 bit location aligned to
-		a a64 bit boundary. To obtain the clean value, shift right 2
+		a 64 bit boundary. To obtain the clean value, shift right 2
 		and apply a mask to zero the top 16 bits of the result.
 		For other storage combinations this attribute will be extended
 		appropriately.

Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523

@@ -0,0 +1,37 @@
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present
+What:		/sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present
+What:		/sys/bus/iio/devices/iio:deviceX/vcxo_clk_present
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'.
+		'1' means that the clock in question is present.
+		'0' means that the clock is missing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/pllY_locked
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns either '1' or '0'. '1' means that the
+		pllY is locked.
+
+What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' stores the current device configuration into
+		on-chip EEPROM. After power-up or chip reset the device will
+		automatically load the saved configuration.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sync_dividers
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' triggers the clock distribution synchronization
+		functionality. All dividers are reset and the channels start
+		with their predefined phase offsets (out_altvoltageY_phase).
+		Writing this file has the effect as driving the external
+		/SYNC pin low.