Skip to content

Commit

Permalink
dt-bindings: video: Add documentation for rockchip vop
Browse files Browse the repository at this point in the history
This adds binding documentation for Rockchip SoC VOP driver.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
  • Loading branch information
Mark Yao authored and yzq committed Dec 2, 2014
1 parent 344ebae commit 5ac4837
Showing 1 changed file with 58 additions and 0 deletions.
58 changes: 58 additions & 0 deletions Documentation/devicetree/bindings/video/rockchip-vop.txt
Original file line number Diff line number Diff line change
@@ -0,0 +1,58 @@
device-tree bindings for rockchip soc display controller (vop)

VOP (Visual Output Processor) is the Display Controller for the Rockchip
series of SoCs which transfers the image data from a video memory
buffer to an external LCD interface.

Required properties:
- compatible: value should be one of the following
"rockchip,rk3288-vop";

- interrupts: should contain a list of all VOP IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.

- clocks: must include clock specifiers corresponding to entries in the
clock-names property.

- clock-names: Must contain
aclk_vop: for ddr buffer transfer.
hclk_vop: for ahb bus to R/W the phy regs.
dclk_vop: pixel clock.

- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- axi
- ahb
- dclk

- iommus: required a iommu node

- port: A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.

Example:
SoC specific DT entry:
vopb: vopb@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff930000 0x19c>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopb_out_edp: endpoint@0 {
reg = <0>;
remote-endpoint=<&edp_in_vopb>;
};
vopb_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint=<&hdmi_in_vopb>;
};
};
};

0 comments on commit 5ac4837

Please sign in to comment.