Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mariux64 · Jun 10, 2022 · 5c281b4 · 5c281b4
2 parents b97dcb8 + aa3398f
commit 5c281b4
Show file tree

Hide file tree

Showing 272 changed files with 2,139 additions and 981 deletions.
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
@@ -26,6 +26,6 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		     DDR Backup Mode must be explicitly enabled by the user,
 		     to invoke step 1.
 
-		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
+		See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
 Users:		User space applications for embedded boards equipped with a
 		BD9571MWV PMIC.
diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
@@ -34,7 +34,7 @@ CPU so it is usually wise not to overlap any physical RAM with
 the TCM.
 
 The TCM memory can then be remapped to another address again using
-the MMU, but notice that the TCM if often used in situations where
+the MMU, but notice that the TCM is often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
 memory in the location specified by the kernel. Currently Linux

diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst
@@ -371,7 +371,7 @@ The regset data starts with struct user_za_header, containing:
 Appendix A.  SME programmer's model (informative)
 =================================================
 
-This section provides a minimal description of the additions made by SVE to the
+This section provides a minimal description of the additions made by SME to the
 ARMv8-A programmer's model that are relevant to this document.
 
 Note: This section is for information only and not intended to be complete or

diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -45,7 +45,7 @@ description: |
   The case where SH and SP are both 1 is likely not very interesting.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem

diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -71,11 +71,6 @@ properties:
       - description: number of output lines for the green channel (G)
       - description: number of output lines for the blue channel (B)
 
-  arm,malidp-arqos-high-level:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      integer describing the ARQoS levels of DP500's QoS signaling
-
   arm,malidp-arqos-value:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -113,7 +108,7 @@ examples:
         clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
         clock-names = "pxlclk", "mclk", "aclk", "pclk";
         arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-        arm,malidp-arqos-high-level = <0xd000d000>;
+        arm,malidp-arqos-value = <0xd000d000>;
 
         port {
             dp0_output: endpoint {

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7180 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7280
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SDM845 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI controller
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: "../dsi-controller.yaml#"

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 10nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 14nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 20nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 28nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Description of Qualcomm Display DSI PHY common dt properties
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   This defines the DSI PHY dt properties which are common for all

diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:

diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -150,7 +150,6 @@ allOf:
           description: 5 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          maxItems: 6
           items:
             - const: sid
             - const: broadcast
@@ -170,7 +169,6 @@ allOf:
           description: 17 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          minItems: 18
           items:
             - const: sid
             - const: broadcast
@@ -202,7 +200,6 @@ allOf:
           description: 17 memory controller channels and 1 for stream-id registers
 
         reg-names:
-          minItems: 18
           items:
             - const: sid
             - const: broadcast

diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 description: |
   MAX77714 is a Power Management IC with 4 buck regulators, 9

diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -148,7 +148,6 @@ allOf:
           items:
             - description: Xenon IP registers
             - description: Armada 3700 SoC PHY PAD Voltage Control register
-          minItems: 2
 
         marvell,pad-type:
           $ref: /schemas/types.yaml#/definitions/string

diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -55,7 +55,6 @@ properties:
     maxItems: 1
 
   apple,sart:
-    maxItems: 1
     $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Reference to the SART address filter.

diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QMP USB3 DP PHY controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QUSB2 phy controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description:
   QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Synopsys Femto High-Speed USB PHY V2
 
 maintainers:
-  - Wesley Cheng <wcheng@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description: |
   Qualcomm High-Speed USB PHY

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -27,7 +27,7 @@ Required properties:
 - pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
 
 First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rk808.txt
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
 
 Optional properties:
 -------------------

diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -32,31 +32,37 @@ patternProperties:
           groups:
             description: The pin group to select.
             enum: [
+              # common
+              i2c, spi, wdt,
+
               # For MT7620 SoC
-              ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk,
-              uartf, uartlite, wdt, wled,
+              ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
+              uartf, uartlite, wled,
 
               # For MT7628 and MT7688 SoCs
-              gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+              gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
               p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
-              pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2,
-              wdt, wled_an, wled_kn,
+              pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
+              wled_an, wled_kn,
             ]
 
           function:
             description: The mux function to select.
             enum: [
+              # common
+              gpio, i2c, refclk, spi,
+
               # For MT7620 SoC
-              ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa,
-              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk,
-              rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk,
+              ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
+              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+              rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
               wdt rst, wled,
 
               # For MT7628 and MT7688 SoCs
-              antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
+              antenna, debug, i2s, jtag, p0led_an, p0led_kn,
               p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
               p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
-              refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1,
+              rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
               spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
             ]