net/mlx5e: Expose physical layer statistical counters to ethtool

Use ethtool -S to query physical layer statistical counters including:
- rx_symbol_errors_phy: Number of symbol errors that were not corrected
  by FEC correction algorithm or that FEC was not active on this interface.

- rx_corrected_bits_phy: Number of corrected bits according to active
  FEC (RS/FC).

Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -170,7 +170,7 @@ static int mlx5e_get_sset_count(struct net_device *dev, int sset)
 	case ETH_SS_STATS:
 		return NUM_SW_COUNTERS +
 		       MLX5E_NUM_Q_CNTRS(priv) +
-		       NUM_VPORT_COUNTERS + NUM_PPORT_COUNTERS +
+		       NUM_VPORT_COUNTERS + NUM_PPORT_COUNTERS(priv) +
 		       MLX5E_NUM_RQ_STATS(priv) +
 		       MLX5E_NUM_SQ_STATS(priv) +
 		       MLX5E_NUM_PFC_COUNTERS(priv) +
@@ -218,6 +218,10 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data)
 		strcpy(data + (idx++) * ETH_GSTRING_LEN,
 		       pport_2819_stats_desc[i].format);
 
+	for (i = 0; i < NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv); i++)
+		strcpy(data + (idx++) * ETH_GSTRING_LEN,
+		       pport_phy_statistical_stats_desc[i].format);
+
 	for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
 		for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
 			sprintf(data + (idx++) * ETH_GSTRING_LEN,
@@ -330,6 +334,10 @@ static void mlx5e_get_ethtool_stats(struct net_device *dev,
 		data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.RFC_2819_counters,
 						  pport_2819_stats_desc, i);
 
+	for (i = 0; i < NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv); i++)
+		data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.phy_statistical_counters,
+						  pport_phy_statistical_stats_desc, i);
+
 	for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
 		for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
 			data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.per_prio_counters[prio],

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -268,6 +268,12 @@ static void mlx5e_update_pport_counters(struct mlx5e_priv *priv)
 	MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_COUNTERS_GROUP);
 	mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
 
+	if (MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_statistical_group)) {
+		out = pstats->phy_statistical_counters;
+		MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_STATISTICAL_GROUP);
+		mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
+	}
+
 	MLX5_SET(ppcnt_reg, in, grp, MLX5_PER_PRIORITY_COUNTERS_GROUP);
 	for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
 		out = pstats->per_prio_counters[prio];

drivers/net/ethernet/mellanox/mlx5/core/en_stats.h

@@ -201,6 +201,12 @@ static const struct counter_desc vport_stats_desc[] = {
 #define PPORT_2819_GET(pstats, c) \
 	MLX5_GET64(ppcnt_reg, pstats->RFC_2819_counters, \
 		   counter_set.eth_2819_cntrs_grp_data_layout.c##_high)
+#define PPORT_PHY_STATISTICAL_OFF(c) \
+	MLX5_BYTE_OFF(ppcnt_reg, \
+		      counter_set.phys_layer_statistical_cntrs.c##_high)
+#define PPORT_PHY_STATISTICAL_GET(pstats, c) \
+	MLX5_GET64(ppcnt_reg, (pstats)->phy_statistical_counters, \
+		   counter_set.phys_layer_statistical_cntrs.c##_high)
 #define PPORT_PER_PRIO_OFF(c) \
 	MLX5_BYTE_OFF(ppcnt_reg, \
 		      counter_set.eth_per_prio_grp_data_layout.c##_high)
@@ -215,6 +221,7 @@ struct mlx5e_pport_stats {
 	__be64 RFC_2819_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
 	__be64 per_prio_counters[NUM_PPORT_PRIO][MLX5_ST_SZ_QW(ppcnt_reg)];
 	__be64 phy_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
+	__be64 phy_statistical_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
 };
 
 static const struct counter_desc pport_802_3_stats_desc[] = {
@@ -260,6 +267,11 @@ static const struct counter_desc pport_2819_stats_desc[] = {
 	{ "rx_8192_to_10239_bytes_phy", PPORT_2819_OFF(ether_stats_pkts8192to10239octets) },
 };
 
+static const struct counter_desc pport_phy_statistical_stats_desc[] = {
+	{ "rx_symbol_errors_phy", PPORT_PHY_STATISTICAL_OFF(phy_symbol_errors) },
+	{ "rx_corrected_bits_phy", PPORT_PHY_STATISTICAL_OFF(phy_corrected_bits) },
+};
+
 static const struct counter_desc pport_per_prio_traffic_stats_desc[] = {
 	{ "rx_prio%d_bytes", PPORT_PER_PRIO_OFF(rx_octets) },
 	{ "rx_prio%d_packets", PPORT_PER_PRIO_OFF(rx_frames) },
@@ -360,13 +372,17 @@ static const struct counter_desc sq_stats_desc[] = {
 #define NUM_PPORT_802_3_COUNTERS	ARRAY_SIZE(pport_802_3_stats_desc)
 #define NUM_PPORT_2863_COUNTERS		ARRAY_SIZE(pport_2863_stats_desc)
 #define NUM_PPORT_2819_COUNTERS		ARRAY_SIZE(pport_2819_stats_desc)
+#define NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv) \
+	(ARRAY_SIZE(pport_phy_statistical_stats_desc) * \
+	 MLX5_CAP_PCAM_FEATURE((priv)->mdev, ppcnt_statistical_group))
 #define NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS \
 	ARRAY_SIZE(pport_per_prio_traffic_stats_desc)
 #define NUM_PPORT_PER_PRIO_PFC_COUNTERS \
 	ARRAY_SIZE(pport_per_prio_pfc_stats_desc)
-#define NUM_PPORT_COUNTERS		(NUM_PPORT_802_3_COUNTERS + \
+#define NUM_PPORT_COUNTERS(priv)	(NUM_PPORT_802_3_COUNTERS + \
 					 NUM_PPORT_2863_COUNTERS  + \
 					 NUM_PPORT_2819_COUNTERS  + \
+					 NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv) + \
 					 NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS * \
 					 NUM_PPORT_PRIO)
 #define NUM_RQ_STATS			ARRAY_SIZE(rq_stats_desc)