Merge branch 'for-3.13/drivers' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 3.13.  As with the core pull
  request just sent out, this was rebased on top of the core branch
  again after the immutable series was pulled.  This also means that
  bcache gets to sit the initial pull over.  I will send a second driver
  pull request in the merge window to get those fixes in, once they have
  been rebased and tested on top of the non-immutable stack.

  This pull request contains:

   - Add support for the sTec Kronos pci-e flash card from sTec.  Also
     has various cleanups for this driver, from myself, Bart, Mike
     Snizter, and Wei Yongjun.

   - Add surprise removal support for the micron mtip32xx driver from
     Micron.

   - Floppy documentation fix from Ben Harris.

   - debugfs bug fix for pktcdvd from Dan Carpenter.

   - Fix for the mtip32xx driver stack usage in the debugfs path,
     dynamically allocating those buffers instead.  From David Milburn.

   - Disable cpqarray in Kconfig.  The plan is to remove it on request
     of HP, but lets disable it for a few revisions just to see if
     anyone yells.

   - drbd fixes from Lars Ellenberg and Philipp Reisner.

   - Elevator switch fix for the s390 block driver from Heiko Carstens.

   - loop crash fix on IO to unassigned device from Mikulas Patocka.

   - A series of bug fixes for the IBM rsxx pci-e flash driver from
     Philip J Kelleher.

   - cciss probe fix from Stephen Cameron.

   - Xen block front/back fixes from Roger Pau Monne and Vegard Nossum"

* 'for-3.13/drivers' of git://git.kernel.dk/linux-block: (41 commits)
  floppy: Correct documentation of driver options when used as a module.
  pktcdvd: debugfs functions return NULL on error
  xen-blkfront: restore the non-persistent data path
  skd: fix formatting in skd_s1120.h
  skd: reorder construct/destruct code
  skd: cleanup skd_do_inq_page_da()
  skd: remove SKD_OMIT_FROM_SRC_DIST ifdefs
  skd: remove redundant skdev->pdev assignment from skd_pci_probe()
  skd: use <asm/unaligned.h>
  skd: remove SCSI subsystem specific includes
  skd: register block device only if some devices are present
  skd: fix error messages in skd_init()
  skd: fix error paths in skd_init()
  skd: fix unregister_blkdev() placement
  skd: more removal of bio-based code
  skd: cleanup the skd_*() function block wrapping
  skd: rip out bio path
  skd: fix error return code in skd_pci_probe()
  s390/dasd: hold request queue sysfs lock when calling elevator_init()
  cciss: return 0 from driver probe function on success, not 1
  ...

Documentation/blockdev/floppy.txt

@@ -39,15 +39,15 @@ Module configuration options
 ============================
 
  If you use the floppy driver as a module, use the following syntax:
-modprobe floppy <options>
+modprobe floppy floppy="<options>"
 
 Example:
- modprobe floppy omnibook messages
+ modprobe floppy floppy="omnibook messages"
 
  If you need certain options enabled every time you load the floppy driver,
 you can put:
 
- options floppy omnibook messages
+ options floppy floppy="omnibook messages"
 
 in a configuration file in /etc/modprobe.d/.
 

drivers/block/Kconfig

@@ -110,7 +110,7 @@ source "drivers/block/mtip32xx/Kconfig"
 
 config BLK_CPQ_DA
 	tristate "Compaq SMART2 support"
-	depends on PCI && VIRT_TO_BUS
+	depends on PCI && VIRT_TO_BUS && 0
 	help
 	  This is the driver for Compaq Smart Array controllers.  Everyone
 	  using these boards should say Y here.  See the file
@@ -319,6 +319,16 @@ config BLK_DEV_NVME
 	  To compile this driver as a module, choose M here: the
 	  module will be called nvme.
 
+config BLK_DEV_SKD
+	tristate "STEC S1120 Block Driver"
+	depends on PCI
+	depends on 64BIT
+	---help---
+	Saying Y or M here will enable support for the
+	STEC, Inc. S1120 PCIe SSD.
+
+	Use device /dev/skd$N amd /dev/skd$Np$M.
+
 config BLK_DEV_OSD
 	tristate "OSD object-as-blkdev support"
 	depends on SCSI_OSD_ULD

drivers/block/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
 obj-$(CONFIG_MG_DISK)		+= mg_disk.o
 obj-$(CONFIG_SUNVDC)		+= sunvdc.o
 obj-$(CONFIG_BLK_DEV_NVME)	+= nvme.o
+obj-$(CONFIG_BLK_DEV_SKD)	+= skd.o
 obj-$(CONFIG_BLK_DEV_OSD)	+= osdblk.o
 
 obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
@@ -44,4 +45,5 @@ obj-$(CONFIG_BLK_DEV_RSXX) += rsxx/
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk.o
 
 nvme-y		:= nvme-core.o nvme-scsi.o
+skd-y		:= skd_main.o
 swim_mod-y	:= swim.o swim_asm.o

drivers/block/cciss.c

@@ -5183,7 +5183,7 @@ static int cciss_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rebuild_lun_table(h, 1, 0);
 	cciss_engage_scsi(h);
 	h->busy_initializing = 0;
-	return 1;
+	return 0;
 
 clean4:
 	cciss_free_cmd_pool(h);

drivers/block/drbd/drbd_int.h

@@ -1474,7 +1474,8 @@ enum determine_dev_size {
 	DS_ERROR = -1,
 	DS_UNCHANGED = 0,
 	DS_SHRUNK = 1,
-	DS_GREW = 2
+	DS_GREW = 2,
+	DS_GREW_FROM_ZERO = 3,
 };
 extern enum determine_dev_size
 drbd_determine_dev_size(struct drbd_conf *, enum dds_flags, struct resize_parms *) __must_hold(local);

drivers/block/drbd/drbd_main.c

@@ -2750,13 +2750,6 @@ int __init drbd_init(void)
 		return err;
 	}
 
-	err = drbd_genl_register();
-	if (err) {
-		printk(KERN_ERR "drbd: unable to register generic netlink family\n");
-		goto fail;
-	}
-
-
 	register_reboot_notifier(&drbd_notifier);
 
 	/*
@@ -2767,6 +2760,15 @@ int __init drbd_init(void)
 	drbd_proc = NULL; /* play safe for drbd_cleanup */
 	idr_init(&minors);
 
+	rwlock_init(&global_state_lock);
+	INIT_LIST_HEAD(&drbd_tconns);
+
+	err = drbd_genl_register();
+	if (err) {
+		printk(KERN_ERR "drbd: unable to register generic netlink family\n");
+		goto fail;
+	}
+
 	err = drbd_create_mempools();
 	if (err)
 		goto fail;
@@ -2778,9 +2780,6 @@ int __init drbd_init(void)
 		goto fail;
 	}
 
-	rwlock_init(&global_state_lock);
-	INIT_LIST_HEAD(&drbd_tconns);
-
 	retry.wq = create_singlethread_workqueue("drbd-reissue");
 	if (!retry.wq) {
 		printk(KERN_ERR "drbd: unable to create retry workqueue\n");

drivers/block/drbd/drbd_nl.c

@@ -955,7 +955,7 @@ drbd_determine_dev_size(struct drbd_conf *mdev, enum dds_flags flags, struct res
 	}
 
 	if (size > la_size_sect)
-		rv = DS_GREW;
+		rv = la_size_sect ? DS_GREW : DS_GREW_FROM_ZERO;
 	if (size < la_size_sect)
 		rv = DS_SHRUNK;
 
@@ -1132,9 +1132,9 @@ void drbd_reconsider_max_bio_size(struct drbd_conf *mdev)
 	/* We may ignore peer limits if the peer is modern enough.
 	   Because new from 8.3.8 onwards the peer can use multiple
 	   BIOs for a single peer_request */
-	if (mdev->state.conn >= C_CONNECTED) {
+	if (mdev->state.conn >= C_WF_REPORT_PARAMS) {
 		if (mdev->tconn->agreed_pro_version < 94)
-			peer = min( mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET);
+			peer = min(mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET);
 			/* Correct old drbd (up to 8.3.7) if it believes it can do more than 32KiB */
 		else if (mdev->tconn->agreed_pro_version == 94)
 			peer = DRBD_MAX_SIZE_H80_PACKET;

drivers/block/drbd/drbd_receiver.c

@@ -1890,29 +1890,11 @@ static u32 seq_max(u32 a, u32 b)
 	return seq_greater(a, b) ? a : b;
 }
 
-static bool need_peer_seq(struct drbd_conf *mdev)
-{
-	struct drbd_tconn *tconn = mdev->tconn;
-	int tp;
-
-	/*
-	 * We only need to keep track of the last packet_seq number of our peer
-	 * if we are in dual-primary mode and we have the resolve-conflicts flag set; see
-	 * handle_write_conflicts().
-	 */
-
-	rcu_read_lock();
-	tp = rcu_dereference(mdev->tconn->net_conf)->two_primaries;
-	rcu_read_unlock();
-
-	return tp && test_bit(RESOLVE_CONFLICTS, &tconn->flags);
-}
-
 static void update_peer_seq(struct drbd_conf *mdev, unsigned int peer_seq)
 {
 	unsigned int newest_peer_seq;
 
-	if (need_peer_seq(mdev)) {
+	if (test_bit(RESOLVE_CONFLICTS, &mdev->tconn->flags)) {
 		spin_lock(&mdev->peer_seq_lock);
 		newest_peer_seq = seq_max(mdev->peer_seq, peer_seq);
 		mdev->peer_seq = newest_peer_seq;
@@ -1972,22 +1954,31 @@ static int wait_for_and_update_peer_seq(struct drbd_conf *mdev, const u32 peer_s
 {
 	DEFINE_WAIT(wait);
 	long timeout;
-	int ret;
+	int ret = 0, tp;
 
-	if (!need_peer_seq(mdev))
+	if (!test_bit(RESOLVE_CONFLICTS, &mdev->tconn->flags))
 		return 0;
 
 	spin_lock(&mdev->peer_seq_lock);
 	for (;;) {
 		if (!seq_greater(peer_seq - 1, mdev->peer_seq)) {
 			mdev->peer_seq = seq_max(mdev->peer_seq, peer_seq);
-			ret = 0;
 			break;
 		}
+
 		if (signal_pending(current)) {
 			ret = -ERESTARTSYS;
 			break;
 		}
+
+		rcu_read_lock();
+		tp = rcu_dereference(mdev->tconn->net_conf)->two_primaries;
+		rcu_read_unlock();
+
+		if (!tp)
+			break;
+
+		/* Only need to wait if two_primaries is enabled */
 		prepare_to_wait(&mdev->seq_wait, &wait, TASK_INTERRUPTIBLE);
 		spin_unlock(&mdev->peer_seq_lock);
 		rcu_read_lock();
@@ -2228,8 +2219,10 @@ static int receive_Data(struct drbd_tconn *tconn, struct packet_info *pi)
 			}
 			goto out_interrupted;
 		}
-	} else
+	} else {
+		update_peer_seq(mdev, peer_seq);
 		spin_lock_irq(&mdev->tconn->req_lock);
+	}
 	list_add(&peer_req->w.list, &mdev->active_ee);
 	spin_unlock_irq(&mdev->tconn->req_lock);
 
@@ -4132,7 +4125,11 @@ recv_bm_rle_bits(struct drbd_conf *mdev,
 				(unsigned int)bs.buf_len);
 			return -EIO;
 		}
-		look_ahead >>= bits;
+		/* if we consumed all 64 bits, assign 0; >> 64 is "undefined"; */
+		if (likely(bits < 64))
+			look_ahead >>= bits;
+		else
+			look_ahead = 0;
 		have -= bits;
 
 		bits = bitstream_get_bits(&bs, &tmp, 64 - have);

drivers/block/drbd/drbd_req.c

@@ -1306,13 +1306,16 @@ int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct
 	int backing_limit;
 
 	if (bio_size && get_ldev(mdev)) {
+		unsigned int max_hw_sectors = queue_max_hw_sectors(q);
 		struct request_queue * const b =
 			mdev->ldev->backing_bdev->bd_disk->queue;
 		if (b->merge_bvec_fn) {
 			backing_limit = b->merge_bvec_fn(b, bvm, bvec);
 			limit = min(limit, backing_limit);
 		}
 		put_ldev(mdev);
+		if ((limit >> 9) > max_hw_sectors)
+			limit = max_hw_sectors << 9;
 	}
 	return limit;
 }

drivers/block/loop.c

@@ -894,13 +894,6 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 
 	bio_list_init(&lo->lo_bio_list);
 
-	/*
-	 * set queue make_request_fn, and add limits based on lower level
-	 * device
-	 */
-	blk_queue_make_request(lo->lo_queue, loop_make_request);
-	lo->lo_queue->queuedata = lo;
-
 	if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
 		blk_queue_flush(lo->lo_queue, REQ_FLUSH);
 
@@ -1618,6 +1611,8 @@ static int loop_add(struct loop_device **l, int i)
 	if (!lo)
 		goto out;
 
+	lo->lo_state = Lo_unbound;
+
 	/* allocate id, if @id >= 0, we're requesting that specific id */
 	if (i >= 0) {
 		err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL);
@@ -1635,6 +1630,12 @@ static int loop_add(struct loop_device **l, int i)
 	if (!lo->lo_queue)
 		goto out_free_idr;
 
+	/*
+	 * set queue make_request_fn
+	 */
+	blk_queue_make_request(lo->lo_queue, loop_make_request);
+	lo->lo_queue->queuedata = lo;
+
 	disk = lo->lo_disk = alloc_disk(1 << part_shift);
 	if (!disk)
 		goto out_free_queue;

drivers/block/mg_disk.c

@@ -936,7 +936,7 @@ static int mg_probe(struct platform_device *plat_dev)
 			goto probe_err_3b;
 		}
 		err = request_irq(host->irq, mg_irq,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING,
+				IRQF_TRIGGER_RISING,
 				MG_DEV_NAME, host);
 		if (err) {
 			printk(KERN_ERR "%s:%d fail (request_irq err=%d)\n",