Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...

Documentation/ABI/stable/sysfs-bus-mhi

@@ -29,3 +29,16 @@ Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
                 This can be useful as a method of recovery if the device is
                 non-responsive, or as a means of loading new firmware as a
                 system administration task.
+
+What:           /sys/bus/mhi/devices/.../trigger_edl
+Date:           April 2024
+KernelVersion:  6.10
+Contact:        mhi@lists.linux.dev
+Description:    Writing a non-zero value to this file will force devices to
+                enter EDL (Emergency Download) mode. This entry only exists for
+                devices capable of entering the EDL mode using the standard EDL
+                triggering mechanism defined in the MHI spec v1.2. Once in EDL
+                mode, the flash programmer image can be downloaded to the
+                device to enter the flash programmer execution environment.
+                This can be useful if user wants to use QDL (Qualcomm Download,
+                which is used to download firmware over EDL) to update firmware.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x

@@ -22,7 +22,7 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Used in conjunction with @addr_idx.  Specifies
 		characteristics about the address comparator being configure,
 		for example the access type, the kind of instruction to trace,
-		processor contect ID to trigger on, etc.  Individual fields in
+		processor context ID to trigger on, etc.  Individual fields in
 		the access type register may vary on the version of the trace
 		entity.
 

Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc

@@ -97,7 +97,7 @@ Date:		August 2023
 KernelVersion:	6.7
 Contact:	Anshuman Khandual <anshuman.khandual@arm.com>
 Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available
-		for the users to configure explicitly. This file is avaialble only
+		for the users to configure explicitly. This file is available only
 		for TMC ETR devices.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred

Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm

@@ -244,7 +244,7 @@ KernelVersion	6.9
 Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
 Description:
 		(RW) Read or write the status of timestamp upon all interface.
-		Only value 0 and 1  can be written to this node. Set this node to 1 to requeset
+		Only value 0 and 1  can be written to this node. Set this node to 1 to request
 		timestamp to all trace packet.
 		Accepts only one of the 2 values -  0 or 1.
 		0 : Disable the timestamp of all trace packets.

Documentation/ABI/testing/sysfs-devices-hisi_ptt → Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt

@@ -1,4 +1,4 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -8,7 +8,7 @@ Description:	This directory contains files for tuning the PCIe link
 
 		See Documentation/trace/hisi-ptt.rst for more information.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -18,7 +18,7 @@ Description:	(RW) Controls the weight of Tx completion TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -28,7 +28,7 @@ Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -38,7 +38,7 @@ Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -49,7 +49,7 @@ Description:	(RW) Control the allocated buffer watermark for inbound packets.
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>

Documentation/ABI/testing/sysfs-bus-iio

@@ -243,7 +243,8 @@ Description:
 		less measurements. Units after application of scale and offset
 		are milli degrees Celsius.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_input
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-iio-ad9739a

@@ -0,0 +1,19 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode
+KernelVersion:	6.9
+Contact:	linux-iio@vger.kernel.org
+Description:
+		DAC operating mode. One of the following modes can be selected:
+
+		* normal: This is DAC normal mode.
+		* mixed-mode: In this mode the output is effectively chopped at
+			      the DAC sample rate. This has the effect of
+			      reducing the power of the fundamental signal while
+			      increasing the power of the images centered around
+			      the DAC sample rate, thus improving the output
+			      power of these images.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode_available
+KernelVersion:	6.9
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available operating modes.

Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml

@@ -66,13 +66,11 @@ properties:
       - const: apb_pclk
 
   in-ports:
-    type: object
     description: |
       Input connections from TPDM to TPDA
     $ref: /schemas/graph.yaml#/properties/ports
 
   out-ports:
-    type: object
     description: |
       Output connections from the TPDA to legacy CoreSight trace bus.
     $ref: /schemas/graph.yaml#/properties/ports
@@ -97,33 +95,31 @@ examples:
   # minimum tpda definition.
   - |
     tpda@6004000 {
-       compatible = "qcom,coresight-tpda", "arm,primecell";
-       reg = <0x6004000 0x1000>;
+      compatible = "qcom,coresight-tpda", "arm,primecell";
+      reg = <0x6004000 0x1000>;
 
-       clocks = <&aoss_qmp>;
-       clock-names = "apb_pclk";
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
 
-       in-ports {
-         #address-cells = <1>;
-         #size-cells = <0>;
+      in-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         port@0 {
           reg = <0>;
           tpda_qdss_0_in_tpdm_dcc: endpoint {
-            remote-endpoint =
-              <&tpdm_dcc_out_tpda_qdss_0>;
-            };
+            remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>;
+          };
         };
       };
 
-       out-ports {
-         port {
-                 tpda_qdss_out_funnel_in0: endpoint {
-                    remote-endpoint =
-                    <&funnel_in0_in_tpda_qdss>;
-                  };
+      out-ports {
+        port {
+          tpda_qdss_out_funnel_in0: endpoint {
+            remote-endpoint = <&funnel_in0_in_tpda_qdss>;
           };
-       };
+        };
+      };
     };
 
 ...

Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SelectMAP FPGA interface
+
+maintainers:
+  - Charles Perry <charles.perry@savoirfairelinux.com>
+
+description: |
+  Xilinx 7 Series FPGAs support a method of loading the bitstream over a
+  parallel port named the SelectMAP interface in the documentation. Only
+  the x8 mode is supported where data is loaded at one byte per rising edge of
+  the clock, with the MSB of each byte presented to the D0 pin.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-xc7s-selectmap
+      - xlnx,fpga-xc7a-selectmap
+      - xlnx,fpga-xc7k-selectmap
+      - xlnx,fpga-xc7v-selectmap
+
+  reg:
+    description:
+      At least 1 byte of memory mapped IO
+    maxItems: 1
+
+  prog-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+  csi-gpios:
+    description:
+      chip select pin (referred to as CSI_B in the manual)
+      Optional gpio for if the bus controller does not provide a chip select.
+    maxItems: 1
+
+  rdwr-gpios:
+    description:
+      read/write select pin (referred to as RDWR_B in the manual)
+      Optional gpio for if the bus controller does not provide this pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog-gpios
+  - done-gpios
+  - init-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    fpga-mgr@8000000 {
+      compatible = "xlnx,fpga-xc7s-selectmap";
+      reg = <0x8000000 0x4>;
+      prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+      init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+      done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+      csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+      rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+    };
+...

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

@@ -32,6 +32,8 @@ properties:
 
   spi-cpol: true
 
+  spi-3wire: true
+
   interrupts:
     maxItems: 1