Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...

Documentation/driver-api/index.rst

@@ -36,6 +36,7 @@ available subsections can be seen below.
    edac
    scsi
    libata
+   target
    mtdnand
    miscellaneous
    w1

Documentation/driver-api/scsi.rst

@@ -334,5 +334,5 @@ todo
 ~~~~
 
 Parallel (fast/wide/ultra) SCSI, USB, SATA, SAS, Fibre Channel,
-FireWire, ATAPI devices, Infiniband, I2O, iSCSI, Parallel ports,
+FireWire, ATAPI devices, Infiniband, I2O, Parallel ports,
 netlink...

Documentation/driver-api/target.rst

@@ -0,0 +1,64 @@
+=================================
+target and iSCSI Interfaces Guide
+=================================
+
+Introduction and Overview
+=========================
+
+TBD
+
+Target core device interfaces
+=============================
+
+.. kernel-doc:: drivers/target/target_core_device.c
+    :export:
+
+Target core transport interfaces
+================================
+
+.. kernel-doc:: drivers/target/target_core_transport.c
+    :export:
+
+Target-supported userspace I/O
+==============================
+
+.. kernel-doc:: drivers/target/target_core_user.c
+    :doc: Userspace I/O
+
+.. kernel-doc:: include/uapi/linux/target_core_user.h
+    :doc: Ring Design
+
+iSCSI helper functions
+======================
+
+.. kernel-doc:: drivers/scsi/libiscsi.c
+   :export:
+
+
+iSCSI boot information
+======================
+
+.. kernel-doc:: drivers/scsi/iscsi_boot_sysfs.c
+   :export:
+
+
+iSCSI transport class
+=====================
+
+The file drivers/scsi/scsi_transport_iscsi.c defines transport
+attributes for the iSCSI class, which sends SCSI packets over TCP/IP
+connections.
+
+.. kernel-doc:: drivers/scsi/scsi_transport_iscsi.c
+   :export:
+
+
+iSCSI TCP interfaces
+====================
+
+.. kernel-doc:: drivers/scsi/iscsi_tcp.c
+   :internal:
+
+.. kernel-doc:: drivers/scsi/libiscsi_tcp.c
+   :export:
+

Documentation/ioctl/ioctl-number.txt

@@ -151,7 +151,7 @@ Code  Seq#(hex)	Include File		Comments
 'J'	00-1F	drivers/scsi/gdth_ioctl.h
 'K'	all	linux/kd.h
 'L'	00-1F	linux/loop.h		conflict!
-'L'	10-1F	drivers/scsi/mpt2sas/mpt2sas_ctl.h	conflict!
+'L'	10-1F	drivers/scsi/mpt3sas/mpt3sas_ctl.h	conflict!
 'L'	20-2F	linux/lightnvm.h
 'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
 					<http://linux01.gwdg.de/~alatham/ppdd.html>

MAINTAINERS

@@ -8446,7 +8446,6 @@ L:	linux-scsi@vger.kernel.org
 W:	http://www.avagotech.com/support/
 S:	Supported
 F:	drivers/message/fusion/
-F:	drivers/scsi/mpt2sas/
 F:	drivers/scsi/mpt3sas/
 
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers

drivers/ata/libata-scsi.c

@@ -5054,6 +5054,18 @@ int ata_sas_port_init(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_init);
 
+int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
+{
+	return ata_tport_add(parent, ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_add);
+
+void ata_sas_tport_delete(struct ata_port *ap)
+{
+	ata_tport_delete(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
+
 /**
  *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
  *	@ap: SATA port to destroy

drivers/hv/ring_buffer.c

@@ -227,6 +227,8 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
 	ring_info->ring_buffer->feature_bits.value = 1;
 
 	ring_info->ring_size = page_cnt << PAGE_SHIFT;
+	ring_info->ring_size_div10_reciprocal =
+		reciprocal_value(ring_info->ring_size / 10);
 	ring_info->ring_datasize = ring_info->ring_size -
 		sizeof(struct hv_ring_buffer);
 

drivers/message/fusion/lsi/mpi_cnfg.h

@@ -1802,13 +1802,13 @@ typedef struct _CONFIG_PAGE_FC_PORT_0
 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2                 (0x00000002)
 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3                 (0x00000004)
 
-#define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN            (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0   Unknown - transceiver incapable of reporting */
+#define MPI_FCPORTPAGE0_SUPPORT_SPEED_UNKNOWN           (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0   Unknown - transceiver incapable of reporting */
 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED             (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT   1   1 GBit/sec */
 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED             (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT   2   2 GBit/sec */
 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED            (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT  4  10 GBit/sec */
 #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED             (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT   8   4 GBit/sec */
 
-#define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN            MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN
+#define MPI_FCPORTPAGE0_CURRENT_SPEED_UNKNOWN           MPI_FCPORTPAGE0_SUPPORT_SPEED_UNKNOWN
 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT             MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT             MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT            MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED

drivers/message/fusion/mptbase.c

@@ -7600,7 +7600,7 @@ mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 
 		snprintf(evStr, EVENT_DESCR_STR_SZ,
 		    "SAS Initiator Device Table Overflow: max initiators=%02d "
-		    "current initators=%02d",
+		    "current initiators=%02d",
 		    max_init, current_init);
 		break;
 	}

drivers/message/fusion/mptfc.c

@@ -693,7 +693,7 @@ mptfc_display_port_link_speed(MPT_ADAPTER *ioc, int portnum, FCPortPage0_t *pp0d
 	state = pp0dest->PortState;
 
 	if (state != MPI_FCPORTPAGE0_PORTSTATE_OFFLINE &&
-	    new_speed != MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN) {
+	    new_speed != MPI_FCPORTPAGE0_CURRENT_SPEED_UNKNOWN) {
 
 		old = old_speed == MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT ? "1 Gbps" :
 		       old_speed == MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT ? "2 Gbps" :

drivers/message/fusion/mptlan.c

@@ -670,7 +670,7 @@ mpt_lan_send_reply(struct net_device *dev, LANSendReply_t *pSendRep)
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static int
+static netdev_tx_t
 mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 {
 	struct mpt_lan_priv *priv = netdev_priv(dev);

drivers/message/fusion/mptsas.c

@@ -4320,7 +4320,7 @@ mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
 			if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
 			    hot_plug_info->id) {
 				printk(MYIOC_s_WARN_FMT "firmware bug: unable "
-				    "to add hidden disk - target_id matchs "
+				    "to add hidden disk - target_id matches "
 				    "volume_id\n", ioc->name);
 				mptsas_free_fw_event(ioc, fw_event);
 				return;

drivers/net/hyperv/hyperv_net.h

@@ -189,7 +189,6 @@ struct netvsc_device;
 struct net_device_context;
 
 extern u32 netvsc_ring_bytes;
-extern struct reciprocal_value netvsc_ring_reciprocal;
 
 struct netvsc_device *netvsc_device_add(struct hv_device *device,
 					const struct netvsc_device_info *info);

drivers/net/hyperv/netvsc.c

@@ -31,7 +31,6 @@
 #include <linux/vmalloc.h>
 #include <linux/rtnetlink.h>
 #include <linux/prefetch.h>
-#include <linux/reciprocal_div.h>
 
 #include <asm/sync_bitops.h>
 
@@ -635,17 +634,6 @@ void netvsc_device_remove(struct hv_device *device)
 #define RING_AVAIL_PERCENT_HIWATER 20
 #define RING_AVAIL_PERCENT_LOWATER 10
 
-/*
- * Get the percentage of available bytes to write in the ring.
- * The return value is in range from 0 to 100.
- */
-static u32 hv_ringbuf_avail_percent(const struct hv_ring_buffer_info *ring_info)
-{
-	u32 avail_write = hv_get_bytes_to_write(ring_info);
-
-	return reciprocal_divide(avail_write  * 100, netvsc_ring_reciprocal);
-}
-
 static inline void netvsc_free_send_slot(struct netvsc_device *net_device,
 					 u32 index)
 {
@@ -694,8 +682,8 @@ static void netvsc_send_tx_complete(struct net_device *ndev,
 		struct netdev_queue *txq = netdev_get_tx_queue(ndev, q_idx);
 
 		if (netif_tx_queue_stopped(txq) &&
-		    (hv_ringbuf_avail_percent(&channel->outbound) > RING_AVAIL_PERCENT_HIWATER ||
-		     queue_sends < 1)) {
+		    (hv_get_avail_to_write_percent(&channel->outbound) >
+		     RING_AVAIL_PERCENT_HIWATER || queue_sends < 1)) {
 			netif_tx_wake_queue(txq);
 			ndev_ctx->eth_stats.wake_queue++;
 		}
@@ -802,7 +790,7 @@ static inline int netvsc_send_pkt(
 	struct netdev_queue *txq = netdev_get_tx_queue(ndev, packet->q_idx);
 	u64 req_id;
 	int ret;
-	u32 ring_avail = hv_ringbuf_avail_percent(&out_channel->outbound);
+	u32 ring_avail = hv_get_avail_to_write_percent(&out_channel->outbound);
 
 	nvmsg.hdr.msg_type = NVSP_MSG1_TYPE_SEND_RNDIS_PKT;
 	if (skb)

drivers/net/hyperv/netvsc_drv.c

@@ -35,7 +35,6 @@
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/netpoll.h>
-#include <linux/reciprocal_div.h>
 
 #include <net/arp.h>
 #include <net/route.h>
@@ -59,7 +58,6 @@ static unsigned int ring_size __ro_after_init = 128;
 module_param(ring_size, uint, 0444);
 MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)");
 unsigned int netvsc_ring_bytes __ro_after_init;
-struct reciprocal_value netvsc_ring_reciprocal __ro_after_init;
 
 static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
 				NETIF_MSG_LINK | NETIF_MSG_IFUP |
@@ -2130,7 +2128,6 @@ static int __init netvsc_drv_init(void)
 			ring_size);
 	}
 	netvsc_ring_bytes = ring_size * PAGE_SIZE;
-	netvsc_ring_reciprocal = reciprocal_value(netvsc_ring_bytes);
 
 	ret = vmbus_driver_register(&netvsc_drv);
 	if (ret)

drivers/s390/scsi/zfcp_dbf.c

@@ -285,6 +285,8 @@ void zfcp_dbf_rec_trig(char *tag, struct zfcp_adapter *adapter,
 	struct list_head *entry;
 	unsigned long flags;
 
+	lockdep_assert_held(&adapter->erp_lock);
+
 	if (unlikely(!debug_level_enabled(dbf->rec, level)))
 		return;
 
@@ -599,16 +601,18 @@ void zfcp_dbf_san_in_els(char *tag, struct zfcp_fsf_req *fsf)
 }
 
 /**
- * zfcp_dbf_scsi - trace event for scsi commands
- * @tag: identifier for event
- * @sc: pointer to struct scsi_cmnd
- * @fsf: pointer to struct zfcp_fsf_req
+ * zfcp_dbf_scsi_common() - Common trace event helper for scsi.
+ * @tag: Identifier for event.
+ * @level: trace level of event.
+ * @sdev: Pointer to SCSI device as context for this event.
+ * @sc: Pointer to SCSI command, or NULL with task management function (TMF).
+ * @fsf: Pointer to FSF request, or NULL.
  */
-void zfcp_dbf_scsi(char *tag, int level, struct scsi_cmnd *sc,
-		   struct zfcp_fsf_req *fsf)
+void zfcp_dbf_scsi_common(char *tag, int level, struct scsi_device *sdev,
+			  struct scsi_cmnd *sc, struct zfcp_fsf_req *fsf)
 {
 	struct zfcp_adapter *adapter =
-		(struct zfcp_adapter *) sc->device->host->hostdata[0];
+		(struct zfcp_adapter *) sdev->host->hostdata[0];
 	struct zfcp_dbf *dbf = adapter->dbf;
 	struct zfcp_dbf_scsi *rec = &dbf->scsi_buf;
 	struct fcp_resp_with_ext *fcp_rsp;
@@ -620,16 +624,28 @@ void zfcp_dbf_scsi(char *tag, int level, struct scsi_cmnd *sc,
 
 	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
 	rec->id = ZFCP_DBF_SCSI_CMND;
-	rec->scsi_result = sc->result;
-	rec->scsi_retries = sc->retries;
-	rec->scsi_allowed = sc->allowed;
-	rec->scsi_id = sc->device->id;
-	rec->scsi_lun = (u32)sc->device->lun;
-	rec->scsi_lun_64_hi = (u32)(sc->device->lun >> 32);
-	rec->host_scribble = (unsigned long)sc->host_scribble;
-
-	memcpy(rec->scsi_opcode, sc->cmnd,
-	       min((int)sc->cmd_len, ZFCP_DBF_SCSI_OPCODE));
+	if (sc) {
+		rec->scsi_result = sc->result;
+		rec->scsi_retries = sc->retries;
+		rec->scsi_allowed = sc->allowed;
+		rec->scsi_id = sc->device->id;
+		rec->scsi_lun = (u32)sc->device->lun;
+		rec->scsi_lun_64_hi = (u32)(sc->device->lun >> 32);
+		rec->host_scribble = (unsigned long)sc->host_scribble;
+
+		memcpy(rec->scsi_opcode, sc->cmnd,
+		       min_t(int, sc->cmd_len, ZFCP_DBF_SCSI_OPCODE));
+	} else {
+		rec->scsi_result = ~0;
+		rec->scsi_retries = ~0;
+		rec->scsi_allowed = ~0;
+		rec->scsi_id = sdev->id;
+		rec->scsi_lun = (u32)sdev->lun;
+		rec->scsi_lun_64_hi = (u32)(sdev->lun >> 32);
+		rec->host_scribble = ~0;
+
+		memset(rec->scsi_opcode, 0xff, ZFCP_DBF_SCSI_OPCODE);
+	}
 
 	if (fsf) {
 		rec->fsf_req_id = fsf->req_id;
@@ -664,6 +680,46 @@ void zfcp_dbf_scsi(char *tag, int level, struct scsi_cmnd *sc,
 	spin_unlock_irqrestore(&dbf->scsi_lock, flags);
 }
 
+/**
+ * zfcp_dbf_scsi_eh() - Trace event for special cases of scsi_eh callbacks.
+ * @tag: Identifier for event.
+ * @adapter: Pointer to zfcp adapter as context for this event.
+ * @scsi_id: SCSI ID/target to indicate scope of task management function (TMF).
+ * @ret: Return value of calling function.
+ *
+ * This SCSI trace variant does not depend on any of:
+ * scsi_cmnd, zfcp_fsf_req, scsi_device.
+ */
+void zfcp_dbf_scsi_eh(char *tag, struct zfcp_adapter *adapter,
+		      unsigned int scsi_id, int ret)
+{
+	struct zfcp_dbf *dbf = adapter->dbf;
+	struct zfcp_dbf_scsi *rec = &dbf->scsi_buf;
+	unsigned long flags;
+	static int const level = 1;
+
+	if (unlikely(!debug_level_enabled(adapter->dbf->scsi, level)))
+		return;
+
+	spin_lock_irqsave(&dbf->scsi_lock, flags);
+	memset(rec, 0, sizeof(*rec));
+
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_SCSI_CMND;
+	rec->scsi_result = ret; /* re-use field, int is 4 bytes and fits */
+	rec->scsi_retries = ~0;
+	rec->scsi_allowed = ~0;
+	rec->fcp_rsp_info = ~0;
+	rec->scsi_id = scsi_id;
+	rec->scsi_lun = (u32)ZFCP_DBF_INVALID_LUN;
+	rec->scsi_lun_64_hi = (u32)(ZFCP_DBF_INVALID_LUN >> 32);
+	rec->host_scribble = ~0;
+	memset(rec->scsi_opcode, 0xff, ZFCP_DBF_SCSI_OPCODE);
+
+	debug_event(dbf->scsi, level, rec, sizeof(*rec));
+	spin_unlock_irqrestore(&dbf->scsi_lock, flags);
+}
+
 static debug_info_t *zfcp_dbf_reg(const char *name, int size, int rec_size)
 {
 	struct debug_info *d;