Skip to content

Commit

Permalink
spi: atmel: Switch to transfer_one transfer method
Browse files Browse the repository at this point in the history 
Switch from using our own transfer_one_message routine to using the one
provided by the SPI core.

Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
Link: https://lore.kernel.org/r/20210602160816.4890-1-dan.sneddon@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
  • Loading branch information
Dan Sneddon authored and Mark Brown committed Jun 3, 2021

Unverified

No user is associated with the committer email.
Learn about vigilant mode
1 parent ec679bd commit 5fa5e6d
Showing 1 changed file with 33 additions and 91 deletions.
124 changes: 33 additions & 91 deletions drivers/spi/spi-atmel.c
View file
Original file line number Diff line number Diff line change
@@ -863,7 +863,6 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
* lock is held, spi irq is blocked
*/
static void atmel_spi_pdc_next_xfer(struct spi_master *master,
struct spi_message *msg,
struct spi_transfer *xfer)
{
struct atmel_spi *as = spi_master_get_devdata(master);
@@ -879,12 +878,12 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
spi_writel(as, RPR, rx_dma);
spi_writel(as, TPR, tx_dma);

if (msg->spi->bits_per_word > 8)
if (xfer->bits_per_word > 8)
len >>= 1;
spi_writel(as, RCR, len);
spi_writel(as, TCR, len);

dev_dbg(&msg->spi->dev,
dev_dbg(&master->dev,
" start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
xfer, xfer->len, xfer->tx_buf,
(unsigned long long)xfer->tx_dma, xfer->rx_buf,
@@ -898,12 +897,12 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
spi_writel(as, RNPR, rx_dma);
spi_writel(as, TNPR, tx_dma);

if (msg->spi->bits_per_word > 8)
if (xfer->bits_per_word > 8)
len >>= 1;
spi_writel(as, RNCR, len);
spi_writel(as, TNCR, len);

dev_dbg(&msg->spi->dev,
dev_dbg(&master->dev,
" next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
xfer, xfer->len, xfer->tx_buf,
(unsigned long long)xfer->tx_dma, xfer->rx_buf,
@@ -1273,12 +1272,28 @@ static int atmel_spi_setup(struct spi_device *spi)
return 0;
}

static void atmel_spi_set_cs(struct spi_device *spi, bool enable)
{
struct atmel_spi *as = spi_master_get_devdata(spi->master);
/* the core doesn't really pass us enable/disable, but CS HIGH vs CS LOW
* since we already have routines for activate/deactivate translate
* high/low to active/inactive
*/
enable = (!!(spi->mode & SPI_CS_HIGH) == enable);

if (enable) {
cs_activate(as, spi);
} else {
cs_deactivate(as, spi);
}

}

static int atmel_spi_one_transfer(struct spi_master *master,
struct spi_message *msg,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct atmel_spi *as;
struct spi_device *spi = msg->spi;
u8 bits;
u32 len;
struct atmel_spi_device *asd;
@@ -1287,11 +1302,8 @@ static int atmel_spi_one_transfer(struct spi_master *master,
unsigned long dma_timeout;

as = spi_master_get_devdata(master);

if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
dev_dbg(&spi->dev, "missing rx or tx buf\n");
return -EINVAL;
}
/* This lock was orignally taken in atmel_spi_trasfer_one_message */
atmel_spi_lock(as);

asd = spi->controller_state;
bits = (asd->csr >> 4) & 0xf;
@@ -1305,13 +1317,13 @@ static int atmel_spi_one_transfer(struct spi_master *master,
* DMA map early, for performance (empties dcache ASAP) and
* better fault reporting.
*/
if ((!msg->is_dma_mapped)
if ((!master->cur_msg_mapped)
&& as->use_pdc) {
if (atmel_spi_dma_map_xfer(as, xfer) < 0)
return -ENOMEM;
}

atmel_spi_set_xfer_speed(as, msg->spi, xfer);
atmel_spi_set_xfer_speed(as, spi, xfer);

as->done_status = 0;
as->current_transfer = xfer;
@@ -1320,15 +1332,16 @@ static int atmel_spi_one_transfer(struct spi_master *master,
reinit_completion(&as->xfer_completion);

if (as->use_pdc) {
atmel_spi_pdc_next_xfer(master, msg, xfer);
atmel_spi_pdc_next_xfer(master, xfer);
} else if (atmel_spi_use_dma(as, xfer)) {
len = as->current_remaining_bytes;
ret = atmel_spi_next_xfer_dma_submit(master,
xfer, &len);
if (ret) {
dev_err(&spi->dev,
"unable to use DMA, fallback to PIO\n");
atmel_spi_next_xfer_pio(master, xfer);
as->done_status = ret;
break;
} else {
as->current_remaining_bytes -= len;
if (as->current_remaining_bytes < 0)
@@ -1381,90 +1394,18 @@ static int atmel_spi_one_transfer(struct spi_master *master,
} else if (atmel_spi_use_dma(as, xfer)) {
atmel_spi_stop_dma(master);
}

if (!msg->is_dma_mapped
&& as->use_pdc)
atmel_spi_dma_unmap_xfer(master, xfer);

return 0;

} else {
/* only update length if no error */
msg->actual_length += xfer->len;
}

if (!msg->is_dma_mapped
if (!master->cur_msg_mapped
&& as->use_pdc)
atmel_spi_dma_unmap_xfer(master, xfer);

spi_transfer_delay_exec(xfer);

if (xfer->cs_change) {
if (list_is_last(&xfer->transfer_list,
&msg->transfers)) {
as->keep_cs = true;
} else {
cs_deactivate(as, msg->spi);
udelay(10);
cs_activate(as, msg->spi);
}
}

return 0;
}

static int atmel_spi_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
struct atmel_spi *as;
struct spi_transfer *xfer;
struct spi_device *spi = msg->spi;
int ret = 0;

as = spi_master_get_devdata(master);

dev_dbg(&spi->dev, "new message %p submitted for %s\n",
msg, dev_name(&spi->dev));

atmel_spi_lock(as);
cs_activate(as, spi);

as->keep_cs = false;

msg->status = 0;
msg->actual_length = 0;

list_for_each_entry(xfer, &msg->transfers, transfer_list) {
trace_spi_transfer_start(msg, xfer);

ret = atmel_spi_one_transfer(master, msg, xfer);
if (ret)
goto msg_done;

trace_spi_transfer_stop(msg, xfer);
}

if (as->use_pdc)
atmel_spi_disable_pdc_transfer(as);

list_for_each_entry(xfer, &msg->transfers, transfer_list) {
dev_dbg(&spi->dev,
" xfer %p: len %u tx %p/%pad rx %p/%pad\n",
xfer, xfer->len,
xfer->tx_buf, &xfer->tx_dma,
xfer->rx_buf, &xfer->rx_dma);
}

msg_done:
if (!as->keep_cs)
cs_deactivate(as, msg->spi);

atmel_spi_unlock(as);

msg->status = as->done_status;
spi_finalize_current_message(spi->master);

return ret;
return as->done_status;
}

static void atmel_spi_cleanup(struct spi_device *spi)
@@ -1554,7 +1495,8 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->num_chipselect = 4;
master->setup = atmel_spi_setup;
master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
master->transfer_one_message = atmel_spi_transfer_one_message;
master->transfer_one = atmel_spi_one_transfer;
master->set_cs = atmel_spi_set_cs;
master->cleanup = atmel_spi_cleanup;
master->auto_runtime_pm = true;
master->max_dma_len = SPI_MAX_DMA_XFER;

0 comments on commit 5fa5e6d

Please sign in to comment.