Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

drivers/platform/x86/Kconfig

@@ -227,7 +227,7 @@ config SONYPI_COMPAT
 config IDEAPAD_LAPTOP
 	tristate "Lenovo IdeaPad Laptop Extras"
 	depends on ACPI
-	depends on RFKILL
+	depends on RFKILL && INPUT
 	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.

drivers/platform/x86/acer-wmi.c

@@ -84,7 +84,7 @@ MODULE_LICENSE("GPL");
  */
 #define AMW0_GUID1		"67C3371D-95A3-4C37-BB61-DD47B491DAAB"
 #define AMW0_GUID2		"431F16ED-0C2B-444C-B267-27DEB140CF9C"
-#define WMID_GUID1		"6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
+#define WMID_GUID1		"6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
 #define WMID_GUID2		"95764E09-FB56-4e83-B31A-37761F60994A"
 #define WMID_GUID3		"61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
 
@@ -1280,7 +1280,7 @@ static ssize_t set_bool_threeg(struct device *dev,
 			return -EINVAL;
 	return count;
 }
-static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
 	set_bool_threeg);
 
 static ssize_t show_interface(struct device *dev, struct device_attribute *attr,

drivers/platform/x86/asus_acpi.c

@@ -1081,14 +1081,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
 	struct proc_dir_entry *proc;
 	mode_t mode;
 
-	/*
-	 * If parameter uid or gid is not changed, keep the default setting for
-	 * our proc entries (-rw-rw-rw-) else, it means we care about security,
-	 * and then set to -rw-rw----
-	 */
-
 	if ((asus_uid == 0) && (asus_gid == 0)) {
-		mode = S_IFREG | S_IRUGO | S_IWUGO;
+		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
 		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "

drivers/platform/x86/dell-laptop.c

@@ -290,9 +290,12 @@ static int dell_rfkill_set(void *data, bool blocked)
 	dell_send_request(buffer, 17, 11);
 
 	/* If the hardware switch controls this radio, and the hardware
-	   switch is disabled, don't allow changing the software state */
+	   switch is disabled, don't allow changing the software state.
+	   If the hardware switch is reported as not supported, always
+	   fire the SMI to toggle the killswitch. */
 	if ((hwswitch_state & BIT(hwswitch_bit)) &&
-	    !(buffer->output[1] & BIT(16))) {
+	    !(buffer->output[1] & BIT(16)) &&
+	    (buffer->output[1] & BIT(0))) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -398,6 +401,23 @@ static const struct file_operations dell_debugfs_fops = {
 
 static void dell_update_rfkill(struct work_struct *ignored)
 {
+	int status;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+	release_buffer();
+
+	/* if hardware rfkill is not supported, set it explicitly */
+	if (!(status & BIT(0))) {
+		if (wifi_rfkill)
+			dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
+		if (bluetooth_rfkill)
+			dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
+		if (wwan_rfkill)
+			dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
+	}
+
 	if (wifi_rfkill)
 		dell_rfkill_query(wifi_rfkill, (void *)1);
 	if (bluetooth_rfkill)

drivers/platform/x86/intel_pmic_gpio.c

@@ -60,69 +60,20 @@ enum pmic_gpio_register {
 #define GPOSW_DOU 0x08
 #define GPOSW_RDRV 0x30
 
+#define GPIO_UPDATE_TYPE	0x80000000
 
 #define NUM_GPIO 24
 
-struct pmic_gpio_irq {
-	spinlock_t lock;
-	u32 trigger[NUM_GPIO];
-	u32 dirty;
-	struct work_struct work;
-};
-
-
 struct pmic_gpio {
+	struct mutex		buslock;
 	struct gpio_chip	chip;
-	struct pmic_gpio_irq	irqtypes;
 	void			*gpiointr;
 	int			irq;
 	unsigned		irq_base;
+	unsigned int		update_type;
+	u32			trigger_type;
 };
 
-static void pmic_program_irqtype(int gpio, int type)
-{
-	if (type & IRQ_TYPE_EDGE_RISING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static void pmic_irqtype_work(struct work_struct *work)
-{
-	struct pmic_gpio_irq *t =
-		container_of(work, struct pmic_gpio_irq, work);
-	unsigned long flags;
-	int i;
-	u16 type;
-
-	spin_lock_irqsave(&t->lock, flags);
-	/* As we drop the lock, we may need multiple scans if we race the
-	   pmic_irq_type function */
-	while (t->dirty) {
-		/*
-		 *	For each pin that has the dirty bit set send an IPC
-		 *	message to configure the hardware via the PMIC
-		 */
-		for (i = 0; i < NUM_GPIO; i++) {
-			if (!(t->dirty & (1 << i)))
-				continue;
-			t->dirty &= ~(1 << i);
-			/* We can't trust the array entry or dirty
-			   once the lock is dropped */
-			type = t->trigger[i];
-			spin_unlock_irqrestore(&t->lock, flags);
-			pmic_program_irqtype(i, type);
-			spin_lock_irqsave(&t->lock, flags);
-		}
-	}
-	spin_unlock_irqrestore(&t->lock, flags);
-}
-
 static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 8) {
@@ -190,25 +141,24 @@ static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 			1 << (offset - 16));
 }
 
-static int pmic_irq_type(unsigned irq, unsigned type)
+/*
+ * This is called from genirq with pg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int pmic_irq_type(struct irq_data *data, unsigned type)
 {
-	struct pmic_gpio *pg = get_irq_chip_data(irq);
-	u32 gpio = irq - pg->irq_base;
-	unsigned long flags;
+	struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+	u32 gpio = data->irq - pg->irq_base;
 
 	if (gpio >= pg->chip.ngpio)
 		return -EINVAL;
 
-	spin_lock_irqsave(&pg->irqtypes.lock, flags);
-	pg->irqtypes.trigger[gpio] = type;
-	pg->irqtypes.dirty |=  (1 << gpio);
-	spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
-	schedule_work(&pg->irqtypes.work);
+	pg->trigger_type = type;
+	pg->update_type = gpio | GPIO_UPDATE_TYPE;
 	return 0;
 }
 
-
-
 static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
@@ -217,38 +167,32 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 }
 
 /* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(unsigned irq)
-{
-};
+static void pmic_irq_unmask(struct irq_data *data) { }
 
-static void pmic_irq_mask(unsigned irq)
-{
-};
+static void pmic_irq_mask(struct irq_data *data) { }
 
 static struct irq_chip pmic_irqchip = {
 	.name		= "PMIC-GPIO",
-	.mask		= pmic_irq_mask,
-	.unmask		= pmic_irq_unmask,
-	.set_type	= pmic_irq_type,
+	.irq_mask	= pmic_irq_mask,
+	.irq_unmask	= pmic_irq_unmask,
+	.irq_set_type	= pmic_irq_type,
 };
 
-static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+static irqreturn_t pmic_irq_handler(int irq, void *data)
 {
-	struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+	struct pmic_gpio *pg = data;
 	u8 intsts = *((u8 *)pg->gpiointr + 4);
 	int gpio;
+	irqreturn_t ret = IRQ_NONE;
 
 	for (gpio = 0; gpio < 8; gpio++) {
 		if (intsts & (1 << gpio)) {
 			pr_debug("pmic pin %d triggered\n", gpio);
 			generic_handle_irq(pg->irq_base + gpio);
+			ret = IRQ_HANDLED;
 		}
 	}
-
-	if (desc->chip->irq_eoi)
-		desc->chip->irq_eoi(irq_get_irq_data(irq));
-	else
-		dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
+	return ret;
 }
 
 static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
@@ -297,17 +241,21 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
 	pg->chip.can_sleep = 1;
 	pg->chip.dev = dev;
 
-	INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
-	spin_lock_init(&pg->irqtypes.lock);
+	mutex_init(&pg->buslock);
 
 	pg->chip.dev = dev;
 	retval = gpiochip_add(&pg->chip);
 	if (retval) {
 		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
 		goto err;
 	}
-	set_irq_data(pg->irq, pg);
-	set_irq_chained_handler(pg->irq, pmic_irq_handler);
+
+	retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
+	if (retval) {
+		printk(KERN_WARNING "pmic: Interrupt request failed\n");
+		goto err;
+	}
+
 	for (i = 0; i < 8; i++) {
 		set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
 					handle_simple_irq, "demux");

drivers/platform/x86/tc1100-wmi.c

@@ -162,7 +162,7 @@ set_bool_##value(struct device *dev, struct device_attribute *attr, \
 			return -EINVAL; \
 	return count; \
 } \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
 	show_bool_##value, set_bool_##value);
 
 show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);

drivers/platform/x86/thinkpad_acpi.c

@@ -2275,16 +2275,12 @@ static void tpacpi_input_send_key(const unsigned int scancode)
 	if (keycode != KEY_RESERVED) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 1);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 0);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
 		mutex_unlock(&tpacpi_inputdev_send_mutex);