Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking updates from David Miller:
 "Here is a pile of bug fixes that accumulated while I was in Europe"

 1) In fixing kernel leaks to userspace during copying of socket
    addresses, we broke a case that used to work, namely the user
    providing a buffer larger than the in-kernel generic socket address
    structure.  This broke Ruby amongst other things.  Fix from Dan
    Carpenter.

 2) Fix regression added by byte queue limit support in 8139cp driver,
    from Yang Yingliang.

 3) The addition of MSG_SENDPAGE_NOTLAST buggered up a few sendpage
    implementations, they should just treat it the same as MSG_MORE.
    Fix from Richard Weinberger and Shawn Landden.

 4) Handle icmpv4 errors received on ipv6 SIT tunnels correctly, from
    Oussama Ghorbel.  In particular we should send an ICMPv6 unreachable
    in such situations.

 5) Fix some regressions in the recent genetlink fixes, in particular
    get the pmcraid driver to use the new safer interfaces correctly.
    From Johannes Berg.

 6) macvtap was converted to use a per-cpu set of statistics, but some
    code was still bumping tx_dropped elsewhere.  From Jason Wang.

 7) Fix build failure of xen-netback due to missing include on some
    architectures, from Andy Whitecroft.

 8) macvtap double counts received packets in statistics, fix from Vlad
    Yasevich.

 9) Fix various cases of using *_STATS_BH() when *_STATS() is more
    appropriate.  From Eric Dumazet and Hannes Frederic Sowa.

10) Pktgen ipsec mode doesn't update the ipv4 header length and checksum
    properly after encapsulation.  Fix from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  net/mlx4_en: Remove selftest TX queues empty condition
  {pktgen, xfrm} Update IPv4 header total len and checksum after tranformation
  virtio_net: make all RX paths handle erors consistently
  virtio_net: fix error handling for mergeable buffers
  virtio_net: Fixed a trivial typo (fitler --> filter)
  netem: fix gemodel loss generator
  netem: fix loss 4 state model
  netem: missing break in ge loss generator
  net/hsr: Support iproute print_opt ('ip -details ...')
  net/hsr: Very small fix of comment style.
  MAINTAINERS: Added net/hsr/ maintainer
  ipv6: fix possible seqlock deadlock in ip6_finish_output2
  ixgbe: Make ixgbe_identify_qsfp_module_generic static
  ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default
  ixgbe: ixgbe_fwd_ring_down needs to be static
  e1000: fix possible reset_task running after adapter down
  e1000: fix lockdep warning in e1000_reset_task
  e1000: prevent oops when adapter is being closed and reset simultaneously
  igb: Fixed Wake On LAN support
  inet: fix possible seqlock deadlocks
  ...

MAINTAINERS

@@ -4049,6 +4049,12 @@ W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org

crypto/algif_hash.c

@@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct socket *sock, struct page *page,
 	struct hash_ctx *ctx = ask->private;
 	int err;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	sg_init_table(ctx->sgl.sg, 1);
 	sg_set_page(ctx->sgl.sg, page, size, offset);

crypto/algif_skcipher.c

@@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct socket *sock, struct page *page,
 	struct skcipher_sg_list *sgl;
 	int err = -EINVAL;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	if (!ctx->more && ctx->used)
 		goto unlock;

drivers/net/bonding/bond_main.c

@@ -4110,7 +4110,7 @@ static int bond_check_params(struct bond_params *params)
 		if (!miimon) {
 			pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
 			pr_warning("Forcing miimon to 100msec\n");
-			miimon = 100;
+			miimon = BOND_DEFAULT_MIIMON;
 		}
 	}
 
@@ -4147,7 +4147,7 @@ static int bond_check_params(struct bond_params *params)
 		if (!miimon) {
 			pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
 			pr_warning("Forcing miimon to 100msec\n");
-			miimon = 100;
+			miimon = BOND_DEFAULT_MIIMON;
 		}
 	}
 

drivers/net/bonding/bond_options.c

@@ -45,10 +45,15 @@ int bond_option_mode_set(struct bonding *bond, int mode)
 		return -EPERM;
 	}
 
-	if (BOND_MODE_IS_LB(mode) && bond->params.arp_interval) {
-		pr_err("%s: %s mode is incompatible with arp monitoring.\n",
-		       bond->dev->name, bond_mode_tbl[mode].modename);
-		return -EINVAL;
+	if (BOND_NO_USES_ARP(mode) && bond->params.arp_interval) {
+		pr_info("%s: %s mode is incompatible with arp monitoring, start mii monitoring\n",
+			bond->dev->name, bond_mode_tbl[mode].modename);
+		/* disable arp monitoring */
+		bond->params.arp_interval = 0;
+		/* set miimon to default value */
+		bond->params.miimon = BOND_DEFAULT_MIIMON;
+		pr_info("%s: Setting MII monitoring interval to %d.\n",
+			bond->dev->name, bond->params.miimon);
 	}
 
 	/* don't cache arp_validate between modes */

drivers/net/bonding/bond_sysfs.c

@@ -523,9 +523,7 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 		ret = -EINVAL;
 		goto out;
 	}
-	if (bond->params.mode == BOND_MODE_ALB ||
-	    bond->params.mode == BOND_MODE_TLB ||
-	    bond->params.mode == BOND_MODE_8023AD) {
+	if (BOND_NO_USES_ARP(bond->params.mode)) {
 		pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
 			bond->dev->name, bond->dev->name);
 		ret = -EINVAL;

drivers/net/bonding/bonding.h

@@ -35,6 +35,8 @@
 
 #define BOND_MAX_ARP_TARGETS	16
 
+#define BOND_DEFAULT_MIIMON	100
+
 #define IS_UP(dev)					   \
 	      ((((dev)->flags & IFF_UP) == IFF_UP)	&& \
 	       netif_running(dev)			&& \
@@ -55,6 +57,11 @@
 		 ((mode) == BOND_MODE_TLB)          ||	\
 		 ((mode) == BOND_MODE_ALB))
 
+#define BOND_NO_USES_ARP(mode)				\
+		(((mode) == BOND_MODE_8023AD)	||	\
+		 ((mode) == BOND_MODE_TLB)	||	\
+		 ((mode) == BOND_MODE_ALB))
+
 #define TX_QUEUE_OVERRIDE(mode)				\
 			(((mode) == BOND_MODE_ACTIVEBACKUP) ||	\
 			 ((mode) == BOND_MODE_ROUNDROBIN))

drivers/net/can/c_can/c_can.c

@@ -712,22 +712,31 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
 	return 0;
 }
 
-static int c_can_get_berr_counter(const struct net_device *dev,
-					struct can_berr_counter *bec)
+static int __c_can_get_berr_counter(const struct net_device *dev,
+				    struct can_berr_counter *bec)
 {
 	unsigned int reg_err_counter;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	c_can_pm_runtime_get_sync(priv);
-
 	reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
 	bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
 				ERR_CNT_REC_SHIFT;
 	bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
 
+	return 0;
+}
+
+static int c_can_get_berr_counter(const struct net_device *dev,
+				  struct can_berr_counter *bec)
+{
+	struct c_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	c_can_pm_runtime_get_sync(priv);
+	err = __c_can_get_berr_counter(dev, bec);
 	c_can_pm_runtime_put_sync(priv);
 
-	return 0;
+	return err;
 }
 
 /*
@@ -754,6 +763,7 @@ static void c_can_do_tx(struct net_device *dev)
 		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
+			c_can_object_get(dev, 0, msg_obj_no, IF_COMM_ALL);
 			stats->tx_bytes += priv->read_reg(priv,
 					C_CAN_IFACE(MSGCTRL_REG, 0))
 					& IF_MCONT_DLC_MASK;
@@ -872,7 +882,7 @@ static int c_can_handle_state_change(struct net_device *dev,
 	if (unlikely(!skb))
 		return 0;
 
-	c_can_get_berr_counter(dev, &bec);
+	__c_can_get_berr_counter(dev, &bec);
 	reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
 	rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
 				ERR_CNT_RP_SHIFT;

drivers/net/can/flexcan.c

@@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "no ipg clock defined\n");
 			return PTR_ERR(clk_ipg);
 		}
-		clock_freq = clk_get_rate(clk_ipg);
 
 		clk_per = devm_clk_get(&pdev->dev, "per");
 		if (IS_ERR(clk_per)) {
 			dev_err(&pdev->dev, "no per clock defined\n");
 			return PTR_ERR(clk_per);
 		}
+		clock_freq = clk_get_rate(clk_per);
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/net/can/sja1000/sja1000.c

@@ -494,20 +494,20 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 	uint8_t isrc, status;
 	int n = 0;
 
-	/* Shared interrupts and IRQ off? */
-	if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
-		return IRQ_NONE;
-
 	if (priv->pre_irq)
 		priv->pre_irq(priv);
 
+	/* Shared interrupts and IRQ off? */
+	if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
+		goto out;
+
 	while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
 	       (n < SJA1000_MAX_IRQ)) {
-		n++;
+
 		status = priv->read_reg(priv, SJA1000_SR);
 		/* check for absent controller due to hw unplug */
 		if (status == 0xFF && sja1000_is_absent(priv))
-			return IRQ_NONE;
+			goto out;
 
 		if (isrc & IRQ_WUI)
 			netdev_warn(dev, "wakeup interrupt\n");
@@ -535,16 +535,17 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 				status = priv->read_reg(priv, SJA1000_SR);
 				/* check for absent controller */
 				if (status == 0xFF && sja1000_is_absent(priv))
-					return IRQ_NONE;
+					goto out;
 			}
 		}
 		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
 			/* error interrupt */
 			if (sja1000_err(dev, isrc, status))
 				break;
 		}
+		n++;
 	}
-
+out:
 	if (priv->post_irq)
 		priv->post_irq(priv);
 

drivers/net/ethernet/broadcom/tg3.c

@@ -10629,10 +10629,8 @@ static void tg3_sd_scan_scratchpad(struct tg3 *tp, struct tg3_ocir *ocir)
 static ssize_t tg3_show_temp(struct device *dev,
 			     struct device_attribute *devattr, char *buf)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct tg3 *tp = netdev_priv(netdev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct tg3 *tp = dev_get_drvdata(dev);
 	u32 temperature;
 
 	spin_lock_bh(&tp->lock);
@@ -10650,29 +10648,25 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, tg3_show_temp, NULL,
 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, tg3_show_temp, NULL,
 			  TG3_TEMP_MAX_OFFSET);
 
-static struct attribute *tg3_attributes[] = {
+static struct attribute *tg3_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	NULL
 };
-
-static const struct attribute_group tg3_group = {
-	.attrs = tg3_attributes,
-};
+ATTRIBUTE_GROUPS(tg3);
 
 static void tg3_hwmon_close(struct tg3 *tp)
 {
 	if (tp->hwmon_dev) {
 		hwmon_device_unregister(tp->hwmon_dev);
 		tp->hwmon_dev = NULL;
-		sysfs_remove_group(&tp->pdev->dev.kobj, &tg3_group);
 	}
 }
 
 static void tg3_hwmon_open(struct tg3 *tp)
 {
-	int i, err;
+	int i;
 	u32 size = 0;
 	struct pci_dev *pdev = tp->pdev;
 	struct tg3_ocir ocirs[TG3_SD_NUM_RECS];
@@ -10690,18 +10684,11 @@ static void tg3_hwmon_open(struct tg3 *tp)
 	if (!size)
 		return;
 
-	/* Register hwmon sysfs hooks */
-	err = sysfs_create_group(&pdev->dev.kobj, &tg3_group);
-	if (err) {
-		dev_err(&pdev->dev, "Cannot create sysfs group, aborting\n");
-		return;
-	}
-
-	tp->hwmon_dev = hwmon_device_register(&pdev->dev);
+	tp->hwmon_dev = hwmon_device_register_with_groups(&pdev->dev, "tg3",
+							  tp, tg3_groups);
 	if (IS_ERR(tp->hwmon_dev)) {
 		tp->hwmon_dev = NULL;
 		dev_err(&pdev->dev, "Cannot register hwmon device, aborting\n");
-		sysfs_remove_group(&pdev->dev.kobj, &tg3_group);
 	}
 }
 

drivers/net/ethernet/emulex/benet/be.h

@@ -503,6 +503,7 @@ struct be_adapter {
 };
 
 #define be_physfn(adapter)		(!adapter->virtfn)
+#define be_virtfn(adapter)		(adapter->virtfn)
 #define	sriov_enabled(adapter)		(adapter->num_vfs > 0)
 #define sriov_want(adapter)             (be_physfn(adapter) &&	\
 					 (num_vfs || pci_num_vf(adapter->pdev)))

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -1032,6 +1032,13 @@ int be_cmd_cq_create(struct be_adapter *adapter, struct be_queue_info *cq,
 	} else {
 		req->hdr.version = 2;
 		req->page_size = 1; /* 1 for 4K */
+
+		/* coalesce-wm field in this cmd is not relevant to Lancer.
+		 * Lancer uses COMMON_MODIFY_CQ to set this field
+		 */
+		if (!lancer_chip(adapter))
+			AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm,
+				      ctxt, coalesce_wm);
 		AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, ctxt,
 								no_delay);
 		AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt,

drivers/net/ethernet/emulex/benet/be_main.c

@@ -2658,8 +2658,8 @@ static int be_close(struct net_device *netdev)
 
 	be_roce_dev_close(adapter);
 
-	for_all_evt_queues(adapter, eqo, i) {
-		if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
+	if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
+		for_all_evt_queues(adapter, eqo, i) {
 			napi_disable(&eqo->napi);
 			be_disable_busy_poll(eqo);
 		}
@@ -3253,12 +3253,10 @@ static int be_mac_setup(struct be_adapter *adapter)
 		memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
 	}
 
-	/* On BE3 VFs this cmd may fail due to lack of privilege.
-	 * Ignore the failure as in this case pmac_id is fetched
-	 * in the IFACE_CREATE cmd.
-	 */
-	be_cmd_pmac_add(adapter, mac, adapter->if_handle,
-			&adapter->pmac_id[0], 0);
+	/* For BE3-R VFs, the PF programs the initial MAC address */
+	if (!(BEx_chip(adapter) && be_virtfn(adapter)))
+		be_cmd_pmac_add(adapter, mac, adapter->if_handle,
+				&adapter->pmac_id[0], 0);
 	return 0;
 }
 
@@ -4599,6 +4597,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (adapter->wol)
 		be_setup_wol(adapter, true);
 
+	be_intr_set(adapter, false);
 	cancel_delayed_work_sync(&adapter->func_recovery_work);
 
 	netif_device_detach(netdev);
@@ -4634,6 +4633,7 @@ static int be_resume(struct pci_dev *pdev)
 	if (status)
 		return status;
 
+	be_intr_set(adapter, true);
 	/* tell fw we're ready to fire cmds */
 	status = be_cmd_fw_init(adapter);
 	if (status)

drivers/net/ethernet/intel/e1000/e1000.h

@@ -83,6 +83,11 @@ struct e1000_adapter;
 
 #define E1000_MAX_INTR			10
 
+/*
+ * Count for polling __E1000_RESET condition every 10-20msec.
+ */
+#define E1000_CHECK_RESET_COUNT	50
+
 /* TX/RX descriptor defines */
 #define E1000_DEFAULT_TXD		256
 #define E1000_MAX_TXD			256
@@ -312,8 +317,6 @@ struct e1000_adapter {
 	struct delayed_work watchdog_task;
 	struct delayed_work fifo_stall_task;
 	struct delayed_work phy_info_task;
-
-	struct mutex mutex;
 };
 
 enum e1000_state_t {