Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: plat-orion: make gpiochip label unique
  enable uncompress log on cpuimx35sd
  cpuimx35: fix touchscreen support
  cpuimx35sd: fix Kconfig
  clock-imx35: fix reboot in internal boot mode
  dma: MX3_IPU fix depends
  imx_v4_v5_defconfig: update default configuration
  cpuimx25sd: fix Kconfig
  arm/imx: fix cpufreq section mismatch
  ARM:imx:fix pwm period value
  ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3

arch/arm/configs/imx_v4_v5_defconfig

@@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_IMX_V4_V5=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
 CONFIG_DM9000=y
+CONFIG_SMC91X=y
 CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -139,6 +140,7 @@ CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_MC13783=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y

arch/arm/mach-imx/Kconfig

@@ -132,7 +132,7 @@ config MACH_MX25_3DS
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
 	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
@@ -148,7 +148,7 @@ config MACH_EUKREA_CPUIMX25
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25
+	depends on MACH_EUKREA_CPUIMX25SD
 	default MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
@@ -542,7 +542,7 @@ config MACH_MX35_3DS
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
 	bool "Support Eukrea CPUIMX35 Platform"
 	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
@@ -560,7 +560,7 @@ config MACH_EUKREA_CPUIMX35
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
+	depends on MACH_EUKREA_CPUIMX35SD
 	default MACH_EUKREA_MBIMXSD35_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD35_BASEBOARD

arch/arm/mach-imx/Makefile

@@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 
 # i.MX27 based machines
@@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o
 # i.MX35 based machines
 obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
 obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 

arch/arm/mach-imx/clock-imx35.c

@@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int cgr2 = 3 << 26, cgr3 = 0;
+	unsigned int cgr2 = 3 << 26;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	cgr2 |= 3 << 16;
@@ -521,6 +521,12 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+	clk_disable(&iim_clk);
 
 	/*
 	 * Check if we came up in internal boot mode. If yes, we need some
@@ -529,17 +535,11 @@ int __init mx35_clocks_init()
 	 */
 	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
 		/* Additionally turn on UART1, SCC, and IIM clocks */
-		cgr2 |= 3 << 16 | 3 << 4;
-		cgr3 |= 3 << 2;
+		clk_enable(&iim_clk);
+		clk_enable(&uart1_clk);
+		clk_enable(&scc_clk);
 	}
 
-	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
-	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX35", mx35_revision());
-	clk_disable(&iim_clk);
-
 #ifdef CONFIG_MXC_USE_EPIT
 	epit_timer_init(&epit1_clk,
 			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);

arch/arm/mach-imx/mach-cpuimx35.c

@@ -53,12 +53,18 @@ static const struct imxi2c_platform_data
 	.bitrate =		100000,
 };
 
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
 };
 
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -3247,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 
 /* 3430ES1-only hwmods */
 static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3430es1_dss_core_hwmod,
-	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 3430ES2+-only hwmods */
 static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 

arch/arm/plat-mxc/cpufreq.c

@@ -98,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy,
 	return ret;
 }
 
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
 	int i;

arch/arm/plat-mxc/include/mach/uncompress.h

@@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 	case MACH_TYPE_LILLY1131:
 	case MACH_TYPE_VPR200:
+	case MACH_TYPE_EUKREA_CPUIMX35SD:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:

arch/arm/plat-mxc/pwm.c

@@ -77,6 +77,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		do_div(c, period_ns);
 		duty_cycles = c;
 
+		/*
+		 * according to imx pwm RM, the real period value should be
+		 * PERIOD value in PWMPR plus 2.
+		 */
+		if (period_cycles > 2)
+			period_cycles -= 2;
+		else
+			period_cycles = 0;
+
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 

arch/arm/plat-orion/gpio.c

@@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	struct orion_gpio_chip *ochip;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
+	char gc_label[16];
 
 	if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
 		return;
 
+	snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+		orion_gpio_chip_count);
+
 	ochip = orion_gpio_chips + orion_gpio_chip_count;
-	ochip->chip.label = "orion_gpio";
+	ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
 	ochip->chip.request = orion_gpio_request;
 	ochip->chip.direction_input = orion_gpio_direction_input;
 	ochip->chip.get = orion_gpio_get;

drivers/dma/Kconfig

@@ -124,7 +124,7 @@ config MV_XOR
 
 config MX3_IPU
 	bool "MX3x Image Processing Unit support"
-	depends on ARCH_MX3
+	depends on SOC_IMX31 || SOC_IMX35
 	select DMA_ENGINE
 	default y
 	help
@@ -216,7 +216,7 @@ config PCH_DMA
 
 config IMX_SDMA
 	tristate "i.MX SDMA support"
-	depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5
+	depends on ARCH_MX25 || SOC_IMX31 || SOC_IMX35 || ARCH_MX5
 	select DMA_ENGINE
 	help
 	  Support the i.MX SDMA engine. This engine is integrated into