Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are are a couple of last-minute fixes for 4.16, mostly for
  regressions. As usual, the majory are device tree changes:

   - USB 3 support on rk3399 didn't work and is being reverted for now

   - One fix for an old suspend/resume bug on rk3399

   - A few regulator related fixes on Banana Pi M2, and on imx7d-sdb

   - A boot regression fix for all Aspeed SoCs failing to find their
     memory

   - One more dtc warning fix

  The other changes are:

   - A few updates to the MAINTAINERS file

   - A revert for an incorrect orion5x cleanup

   - Two power management fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: Fix SRAM W+X mapping
  ARM: dts: aspeed: Add default memory node
  mailmap: Update email address for Gregory CLEMENT
  ARM: davinci: fix the GPIO lookup for omapl138-hawk
  MAINTAINERS: Update Tegra IOMMU maintainer
  ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
  ARM: ux500: Fix PMU IRQ regression
  ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
  Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"
  arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset)
  ARM: OMAP: Fix dmtimer init for omap1
  MAINTAINERS: update email address for Maxime Ripard
  ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
  ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties

.mailmap

@@ -62,6 +62,7 @@ Frank Zago <fzago@systemfabricworks.com>
 Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
+Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>

MAINTAINERS

@@ -1152,7 +1152,7 @@ S:	Maintained
 F:	drivers/clk/sunxi/
 
 ARM/Allwinner sunXi SoC support
-M:	Maxime Ripard <maxime.ripard@free-electrons.com>
+M:	Maxime Ripard <maxime.ripard@bootlin.com>
 M:	Chen-Yu Tsai <wens@csie.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -4626,7 +4626,7 @@ F:	include/uapi/drm/drm*
 F:	include/linux/vga*
 
 DRM DRIVERS FOR ALLWINNER A10
-M:	Maxime Ripard  <maxime.ripard@free-electrons.com>
+M:	Maxime Ripard  <maxime.ripard@bootlin.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/sun4i/
@@ -13644,7 +13644,8 @@ S:	Supported
 F:	drivers/i2c/busses/i2c-tegra.c
 
 TEGRA IOMMU DRIVERS
-M:	Hiroshi Doyu <hdoyu@nvidia.com>
+M:	Thierry Reding <thierry.reding@gmail.com>
+L:	linux-tegra@vger.kernel.org
 S:	Supported
 F:	drivers/iommu/tegra*
 

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -42,6 +42,11 @@
 		};
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -42,6 +42,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/imx7d-sdb.dts

@@ -82,7 +82,7 @@
 		enable-active-high;
 	};
 
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg2_vbus";
 		regulator-min-microvolt = <5000000>;

arch/arm/boot/dts/rk3288.dtsi

@@ -927,6 +927,7 @@
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x10000>;
+		#sound-dai-cells = <0>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1176,6 +1177,7 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
+		#sound-dai-cells = <0>;
 		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;

arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -99,6 +98,7 @@
 	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 30000>;
@@ -118,7 +118,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
 	cd-inverted;
@@ -132,7 +132,7 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
@@ -163,6 +163,8 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
 	};
 };
 
@@ -193,7 +195,28 @@
 
 #include "axp22x.dtsi"
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_dc5ldo {
+	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1320000>;
 	regulator-name = "vdd-cpus";
@@ -233,6 +256,40 @@
 	regulator-name = "vcc-dram";
 };
 
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -127,8 +127,8 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
 		/* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
-		GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
 	},
 };
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -133,6 +133,9 @@ static void __init u8500_init_machine(void)
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
 				     u8540_auxdata_lookup, NULL);
+	else
+		of_platform_populate(NULL, u8500_local_bus_nodes,
+				     NULL, NULL);
 }
 
 static const char * stericsson_dt_platform_compat[] = {

arch/arm/plat-omap/dmtimer.c

@@ -888,11 +888,8 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	timer->irq = irq->start;
 	timer->pdev = pdev;
 
-	/* Skip pm_runtime_enable for OMAP1 */
-	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
-		pm_runtime_enable(dev);
-		pm_runtime_irq_safe(dev);
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		ret = pm_runtime_get_sync(dev);

arch/arm/plat-omap/include/plat/sram.h

@@ -5,13 +5,4 @@ void omap_map_sram(unsigned long start, unsigned long size,
 			unsigned long skip, int cached);
 void omap_sram_reset(void);
 
-extern void *omap_sram_push_address(unsigned long size);
-
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({				\
-	typeof(&(funcp)) _res = NULL;				\
-	void *_sram_address = omap_sram_push_address(size);	\
-	if (_sram_address)					\
-		_res = fncpy(_sram_address, &(funcp), size);	\
-	_res;							\
-})
+extern void *omap_sram_push(void *funcp, unsigned long size);

arch/arm/plat-omap/sram.c

@@ -23,6 +23,7 @@
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
+#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -42,7 +43,7 @@ static void __iomem *omap_sram_ceil;
  * Note that fncpy requires the returned address to be aligned
  * to an 8-byte boundary.
  */
-void *omap_sram_push_address(unsigned long size)
+static void *omap_sram_push_address(unsigned long size)
 {
 	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
 
@@ -60,6 +61,30 @@ void *omap_sram_push_address(unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+
+	return dst;
+}
+
 /*
  * The SRAM context is lost during off-idle and stack
  * needs to be reset.
@@ -75,6 +100,9 @@ void omap_sram_reset(void)
 void __init omap_map_sram(unsigned long start, unsigned long size,
 				 unsigned long skip, int cached)
 {
+	unsigned long base;
+	int pages;
+
 	if (size == 0)
 		return;
 
@@ -95,4 +123,10 @@ void __init omap_map_sram(unsigned long start, unsigned long size,
 	 */
 	memset_io(omap_sram_base + omap_sram_skip, 0,
 		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
 }

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -406,8 +406,9 @@
 	wlan_pd_n: wlan-pd-n {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
 
-		/* Note the wlan_module_reset_l pinctrl */
 		enable-active-high;
 		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 
@@ -983,12 +984,6 @@ ap_i2c_audio: &i2c8 {
 	pinctrl-0 = <
 		&ap_pwroff	/* AP will auto-assert this when in S3 */
 		&clk_32k	/* This pin is always 32k on gru boards */
-
-		/*
-		 * We want this driven low ASAP; firmware should help us, but
-		 * we can help ourselves too.
-		 */
-		&wlan_module_reset_l
 	>;
 
 	pcfg_output_low: pcfg-output-low {
@@ -1168,12 +1163,7 @@ ap_i2c_audio: &i2c8 {
 		};
 
 		wlan_module_reset_l: wlan-module-reset-l {
-			/*
-			 * We want this driven low ASAP (As {Soon,Strongly} As
-			 * Possible), to avoid leakage through the powered-down
-			 * WiFi.
-			 */
-			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		bt_host_wake_l: bt-host-wake-l {

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -411,8 +411,8 @@
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy0_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -444,8 +444,8 @@
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy1_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;