[NET]: ethtool ops are the only way

During the transition to the ethtool_ops way of doing things, we supported
calling the device's ->do_ioctl method to allow unconverted drivers to
continue working.  Those days are long behind us, all in-tree drivers
use the ethtool_ops way, and so we no longer need to support this.

The bonding driver is the biggest beneficiary of this; it no longer
needs to call ioctl() as a fallback if ethtool_ops aren't supported.

Also put a proper copyright statement on ethtool.c.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_main.c

@@ -613,38 +613,20 @@ static int bond_set_carrier(struct bonding *bond)
 static int bond_update_speed_duplex(struct slave *slave)
 {
 	struct net_device *slave_dev = slave->dev;
-	static int (* ioctl)(struct net_device *, struct ifreq *, int);
-	struct ifreq ifr;
 	struct ethtool_cmd etool;
+	int res;
 
 	/* Fake speed and duplex */
 	slave->speed = SPEED_100;
 	slave->duplex = DUPLEX_FULL;
 
-	if (slave_dev->ethtool_ops) {
-		int res;
-
-		if (!slave_dev->ethtool_ops->get_settings) {
-			return -1;
-		}
-
-		res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
-		if (res < 0) {
-			return -1;
-		}
-
-		goto verify;
-	}
+	if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
+		return -1;
 
-	ioctl = slave_dev->do_ioctl;
-	strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
-	etool.cmd = ETHTOOL_GSET;
-	ifr.ifr_data = (char*)&etool;
-	if (!ioctl || (IOCTL(slave_dev, &ifr, SIOCETHTOOL) < 0)) {
+	res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
+	if (res < 0)
 		return -1;
-	}
 
-verify:
 	switch (etool.speed) {
 	case SPEED_10:
 	case SPEED_100:
@@ -690,7 +672,6 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 	static int (* ioctl)(struct net_device *, struct ifreq *, int);
 	struct ifreq ifr;
 	struct mii_ioctl_data *mii;
-	struct ethtool_value etool;
 
 	if (bond->params.use_carrier) {
 		return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
@@ -721,9 +702,10 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 		}
 	}
 
-	/* try SIOCETHTOOL ioctl, some drivers cache ETHTOOL_GLINK */
-	/* for a period of time so we attempt to get link status   */
-	/* from it last if the above MII ioctls fail...            */
+	/*
+	 * Some drivers cache ETHTOOL_GLINK for a period of time so we only
+	 * attempt to get link status from it if the above MII ioctls fail.
+	 */
 	if (slave_dev->ethtool_ops) {
 		if (slave_dev->ethtool_ops->get_link) {
 			u32 link;
@@ -734,23 +716,9 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 		}
 	}
 
-	if (ioctl) {
-		strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
-		etool.cmd = ETHTOOL_GLINK;
-		ifr.ifr_data = (char*)&etool;
-		if (IOCTL(slave_dev, &ifr, SIOCETHTOOL) == 0) {
-			if (etool.data == 1) {
-				return BMSR_LSTATUS;
-			} else {
-				dprintk("SIOCETHTOOL shows link down\n");
-				return 0;
-			}
-		}
-	}
-
 	/*
 	 * If reporting, report that either there's no dev->do_ioctl,
-	 * or both SIOCGMIIREG and SIOCETHTOOL failed (meaning that we
+	 * or both SIOCGMIIREG and get_link failed (meaning that we
 	 * cannot report link status).  If not reporting, pretend
 	 * we're ok.
 	 */

net/8021q/vlan_dev.c

@@ -668,9 +668,6 @@ int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (real_dev->do_ioctl && netif_device_present(real_dev))
 			err = real_dev->do_ioctl(real_dev, &ifrr, cmd);
 		break;
-
-	case SIOCETHTOOL:
-		err = dev_ethtool(&ifrr);
 	}
 
 	if (!err)

net/bridge/br_if.c

@@ -29,35 +29,24 @@
  * Determine initial path cost based on speed.
  * using recommendations from 802.1d standard
  *
- * Need to simulate user ioctl because not all device's that support
- * ethtool, use ethtool_ops.  Also, since driver might sleep need to
- * not be holding any locks.
+ * Since driver might sleep need to not be holding any locks.
  */
 static int port_cost(struct net_device *dev)
 {
-	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-	struct ifreq ifr;
-	mm_segment_t old_fs;
-	int err;
-
-	strncpy(ifr.ifr_name, dev->name, IFNAMSIZ);
-	ifr.ifr_data = (void __user *) &ecmd;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	err = dev_ethtool(&ifr);
-	set_fs(old_fs);
-
-	if (!err) {
-		switch(ecmd.speed) {
-		case SPEED_100:
-			return 19;
-		case SPEED_1000:
-			return 4;
-		case SPEED_10000:
-			return 2;
-		case SPEED_10:
-			return 100;
+	if (dev->ethtool_ops->get_settings) {
+		struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+		int err = dev->ethtool_ops->get_settings(dev, &ecmd);
+		if (!err) {
+			switch(ecmd.speed) {
+			case SPEED_100:
+				return 19;
+			case SPEED_1000:
+				return 4;
+			case SPEED_10000:
+				return 2;
+			case SPEED_10:
+				return 100;
+			}
 		}
 	}
 

net/core/ethtool.c

@@ -3,10 +3,12 @@
  * Copyright (c) 2003 Matthew Wilcox <matthew@wil.cx>
  *
  * This file is where we call all the ethtool_ops commands to get
- * the information ethtool needs.  We fall back to calling do_ioctl()
- * for drivers which haven't been converted to ethtool_ops yet.
+ * the information ethtool needs.
  *
- * It's GPL, stupid.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  */
 
 #include <linux/module.h>
@@ -821,7 +823,7 @@ int dev_ethtool(struct ifreq *ifr)
 		return -ENODEV;
 
 	if (!dev->ethtool_ops)
-		goto ioctl;
+		return -EOPNOTSUPP;
 
 	if (copy_from_user(&ethcmd, useraddr, sizeof (ethcmd)))
 		return -EFAULT;
@@ -960,7 +962,7 @@ int dev_ethtool(struct ifreq *ifr)
 		rc = ethtool_set_gso(dev, useraddr);
 		break;
 	default:
-		rc =  -EOPNOTSUPP;
+		rc = -EOPNOTSUPP;
 	}
 
 	if (dev->ethtool_ops->complete)
@@ -970,15 +972,6 @@ int dev_ethtool(struct ifreq *ifr)
 		netdev_features_change(dev);
 
 	return rc;
-
- ioctl:
-	/* Keep existing behaviour for the moment.	 */
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (dev->do_ioctl)
-		return dev->do_ioctl(dev, ifr, SIOCETHTOOL);
-	return -EOPNOTSUPP;
 }
 
 EXPORT_SYMBOL(dev_ethtool);