Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of wireless updates intended for the 3.15
stream!

For the mac80211 bits, Johannes says:

"We have some cleanups and minor fixes as well as userspace API
improvements from a lot of people, extended VHT support for radiotap
from Emmanuel, CSA improvements from Andrei, Luca and Michal. I've also
included my work on hwsim to make dynamic registration of radios
possible."

Along with that, we get the usual round of updates to ath9k,
brcmfmac, mwifiex, wcn36xx, and the ti drivers -- nothing particularly
noteworthy, mostly just random updates and refactoring.

Also included is a pull of the wireless tree, intended to resolve
some potential merge issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/ath.h

@@ -161,6 +161,8 @@ struct ath_common {
 	bool btcoex_enabled;
 	bool disable_ani;
 	bool bt_ant_diversity;
+
+	int last_rssi;
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,

drivers/net/wireless/ath/ath10k/txrx.c

@@ -204,7 +204,7 @@ static void process_rx_rates(struct ath10k *ar, struct htt_rx_info *info,
 			break;
 		/* 80MHZ */
 		case 2:
-			status->flag |= RX_FLAG_80MHZ;
+			status->vht_flag |= RX_VHT_FLAG_80MHZ;
 		}
 
 		status->flag |= RX_FLAG_VHT;
@@ -266,7 +266,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 		   status->flag & RX_FLAG_HT ? "ht" : "",
 		   status->flag & RX_FLAG_VHT ? "vht" : "",
 		   status->flag & RX_FLAG_40MHZ ? "40" : "",
-		   status->flag & RX_FLAG_80MHZ ? "80" : "",
+		   status->vht_flag & RX_VHT_FLAG_80MHZ ? "80" : "",
 		   status->flag & RX_FLAG_SHORT_GI ? "sgi " : "",
 		   status->rate_idx,
 		   status->vht_nss,

drivers/net/wireless/ath/ath6kl/cfg80211.c

@@ -790,7 +790,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel,
 	if (nw_type & ADHOC_NETWORK) {
 		ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n",
 			   nw_type & ADHOC_CREATOR ? "creator" : "joiner");
-		cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
+		cfg80211_ibss_joined(vif->ndev, bssid, chan, GFP_KERNEL);
 		cfg80211_put_bss(ar->wiphy, bss);
 		return;
 	}
@@ -861,13 +861,9 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 	}
 
 	if (vif->nw_type & ADHOC_NETWORK) {
-		if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) {
+		if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC)
 			ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
 				   "%s: ath6k not in ibss mode\n", __func__);
-			return;
-		}
-		memset(bssid, 0, ETH_ALEN);
-		cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
 		return;
 	}
 
@@ -3256,6 +3252,15 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	struct ath6kl_vif *vif = netdev_priv(dev);
 	u16 interval;
 	int ret, rssi_thold;
+	int n_match_sets = request->n_match_sets;
+
+	/*
+	 * If there's a matchset w/o an SSID, then assume it's just for
+	 * the RSSI (nothing else is currently supported) and ignore it.
+	 * The device only supports a global RSSI filter that we set below.
+	 */
+	if (n_match_sets == 1 && !request->match_sets[0].ssid.ssid_len)
+		n_match_sets = 0;
 
 	if (ar->state != ATH6KL_STATE_ON)
 		return -EIO;
@@ -3268,11 +3273,11 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
 				      request->n_ssids,
 				      request->match_sets,
-				      request->n_match_sets);
+				      n_match_sets);
 	if (ret < 0)
 		return ret;
 
-	if (!request->n_match_sets) {
+	if (!n_match_sets) {
 		ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
 					       ALL_BSS_FILTER, 0);
 		if (ret < 0)
@@ -3286,12 +3291,12 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 
 	if (test_bit(ATH6KL_FW_CAPABILITY_RSSI_SCAN_THOLD,
 		     ar->fw_capabilities)) {
-		if (request->rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
+		if (request->min_rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
 			rssi_thold = 0;
-		else if (request->rssi_thold < -127)
+		else if (request->min_rssi_thold < -127)
 			rssi_thold = -127;
 		else
-			rssi_thold = request->rssi_thold;
+			rssi_thold = request->min_rssi_thold;
 
 		ret = ath6kl_wmi_set_rssi_filter_cmd(ar->wmi, vif->fw_vif_idx,
 						     rssi_thold);

drivers/net/wireless/ath/ath9k/Kconfig

@@ -120,18 +120,6 @@ config ATH9K_WOW
 	  This option enables Wake on Wireless LAN support for certain cards.
 	  Currently, AR9462 is supported.
 
-config ATH9K_LEGACY_RATE_CONTROL
-	bool "Atheros ath9k rate control"
-	depends on ATH9K
-	default n
-	---help---
-	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht. Be warned that there are various
-	  issues with the ath9k RC and minstrel is a more robust algorithm.
-	  Note that even if this option is selected, "ath9k_rate_control"
-	  has to be passed to mac80211 using the module parameter,
-	  ieee80211_default_rc_algo.
-
 config ATH9K_RFKILL
 	bool "Atheros ath9k rfkill support" if EXPERT
 	depends on ATH9K

drivers/net/wireless/ath/ath9k/Makefile

@@ -8,7 +8,6 @@ ath9k-y +=	beacon.o \
 		antenna.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o