Merge remote branch 'tip/perf/core' into oprofile/core

Conflicts:
	arch/arm/oprofile/common.c
	kernel/perf_event.c

CREDITS

@@ -3554,12 +3554,12 @@ E: cvance@nai.com
 D: portions of the Linux Security Module (LSM) framework and security modules
 
 N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
 D: Small contributions to ncpfs
 D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
 
 N: Thibaut Varene
 E: T-Bone@parisc-linux.org

Documentation/kprobes.txt

@@ -542,9 +542,11 @@ Kprobes does not use mutexes or allocate memory except during
 registration and unregistration.
 
 Probe handlers are run with preemption disabled.  Depending on the
-architecture, handlers may also run with interrupts disabled.  In any
-case, your handler should not yield the CPU (e.g., by attempting to
-acquire a semaphore).
+architecture and optimization state, handlers may also run with
+interrupts disabled (e.g., kretprobe handlers and optimized kprobe
+handlers run without interrupt disabled on x86/x86-64).  In any case,
+your handler should not yield the CPU (e.g., by attempting to acquire
+a semaphore).
 
 Since a return probe is implemented by replacing the return
 address with the trampoline's address, stack backtraces and calls

MAINTAINERS

@@ -962,6 +962,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
+ARM/S5P ARM ARCHITECTURES
+M:	Kukjin Kim <kgene.kim@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-s5p*/
+
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>
@@ -1220,15 +1227,15 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
@@ -2199,6 +2206,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
@@ -2662,6 +2675,8 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
@@ -3773,9 +3788,8 @@ W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
@@ -3899,10 +3913,8 @@ F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-M:	Lennart Poettering <mzxreary@0pointer.de>
+M:	Lee, Chun-Yi <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
-W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
@@ -3919,8 +3931,10 @@ S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
@@ -3962,8 +3976,8 @@ S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
-S:	Maintained
+M:	Petr Vandrovec <petr@vandrovec.name>
+S:	Odd Fixes
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
@@ -5091,8 +5105,10 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -568,6 +568,12 @@ endif
 
 ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
 endif
 
 # We trigger additional mismatches with less inlining
@@ -591,6 +597,11 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \

arch/Kconfig

@@ -158,4 +158,7 @@ config HAVE_PERF_EVENTS_NMI
 	  subsystem.  Also has support for calculating CPU cycle events
 	  to determine how many clock cycles in a given period.
 
+config HAVE_ARCH_JUMP_LABEL
+	bool
+
 source "kernel/gcov/Kconfig"

arch/alpha/kernel/entry.S

@@ -73,8 +73,6 @@
 	ldq	$20, HAE_REG($19);	\
 	stq	$21, HAE_CACHE($19);	\
 	stq	$21, 0($20);		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
 99:;					\
 	ldq	$19, 72($sp);		\
 	ldq	$20, 80($sp);		\
@@ -316,7 +314,7 @@ ret_from_sys_call:
 	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
-	beq	$0, restore_all
+	beq	$0, ret_to_kernel
 ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
@@ -329,6 +327,11 @@ restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
 
+ret_to_kernel:
+	lda	$16, 7
+	call_pal PAL_swpipl
+	br restore_all
+
 	.align 3
 $syscall_error:
 	/*
@@ -657,7 +660,7 @@ kernel_thread:
 	/* We don't actually care for a3 success widgetry in the kernel.
 	   Not for positive errno values.  */
 	stq	$0, 0($sp)		/* $0 */
-	br	restore_all
+	br	ret_to_kernel
 .end kernel_thread
 
 /*
@@ -911,15 +914,6 @@ sys_execve:
 	jmp	$31, do_sys_execve
 .end sys_execve
 
-	.align	4
-	.globl	osf_sigprocmask
-	.ent	osf_sigprocmask
-osf_sigprocmask:
-	.prologue 0
-	mov	$sp, $18
-	jmp	$31, sys_osf_sigprocmask
-.end osf_sigprocmask
-
 	.align	4
 	.globl	alpha_ni_syscall
 	.ent	alpha_ni_syscall