[SCSI] qla2xxx: Use standard PCIe Capability Link register field names

Use the standard #defines for PCIe Link Capability register fields
rather than bare numbers.  This also uses the new PCI Express Capability
accessor rather than reading the capability directly.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com>

drivers/scsi/qla2xxx/qla_os.c

@@ -494,18 +494,14 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 	static char *pci_bus_modes[] = { "33", "66", "100", "133", };
 	struct qla_hw_data *ha = vha->hw;
 	uint32_t pci_bus;
-	int pcie_reg;
 
-	pcie_reg = pci_pcie_cap(ha->pdev);
-	if (pcie_reg) {
+	if (pci_is_pcie(ha->pdev)) {
 		char lwstr[6];
-		uint16_t pcie_lstat, lspeed, lwidth;
+		uint32_t lstat, lspeed, lwidth;
 
-		pcie_reg += PCI_EXP_LNKCAP;
-		pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
-		lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
-		lwidth = (pcie_lstat &
-		    (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
+		pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
+		lspeed = lstat & PCI_EXP_LNKCAP_SLS;
+		lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
 
 		strcpy(str, "PCIe (");
 		switch (lspeed) {