net/mlx5e: Use ttl from route lookup on tc encap offload only if needed

Currnetly, the ttl for the encapsulation headers is taken from the
route lookup result. As a pre-step to allow for an offload case when
the user specifies the ttl, take it from the route lookup only if
not zero. While here, also move to use u8 instead int for the ttl.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -2129,7 +2129,7 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv,
 				   struct net_device **out_dev,
 				   struct flowi4 *fl4,
 				   struct neighbour **out_n,
-				   int *out_ttl)
+				   u8 *out_ttl)
 {
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
 	struct mlx5e_rep_priv *uplink_rpriv;
@@ -2153,7 +2153,8 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv,
 	else
 		*out_dev = rt->dst.dev;
 
-	*out_ttl = ip4_dst_hoplimit(&rt->dst);
+	if (!(*out_ttl))
+		*out_ttl = ip4_dst_hoplimit(&rt->dst);
 	n = dst_neigh_lookup(&rt->dst, &fl4->daddr);
 	ip_rt_put(rt);
 	if (!n)
@@ -2182,7 +2183,7 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 				   struct net_device **out_dev,
 				   struct flowi6 *fl6,
 				   struct neighbour **out_n,
-				   int *out_ttl)
+				   u8 *out_ttl)
 {
 	struct neighbour *n = NULL;
 	struct dst_entry *dst;
@@ -2197,7 +2198,8 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 	if (ret < 0)
 		return ret;
 
-	*out_ttl = ip6_dst_hoplimit(dst);
+	if (!(*out_ttl))
+		*out_ttl = ip6_dst_hoplimit(dst);
 
 	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
 	/* if the egress device isn't on the same HW e-switch, we use the uplink */
@@ -2221,7 +2223,7 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 static void gen_vxlan_header_ipv4(struct net_device *out_dev,
 				  char buf[], int encap_size,
 				  unsigned char h_dest[ETH_ALEN],
-				  int ttl,
+				  u8 ttl,
 				  __be32 daddr,
 				  __be32 saddr,
 				  __be16 udp_dst_port,
@@ -2254,7 +2256,7 @@ static void gen_vxlan_header_ipv4(struct net_device *out_dev,
 static void gen_vxlan_header_ipv6(struct net_device *out_dev,
 				  char buf[], int encap_size,
 				  unsigned char h_dest[ETH_ALEN],
-				  int ttl,
+				  u8 ttl,
 				  struct in6_addr *daddr,
 				  struct in6_addr *saddr,
 				  __be16 udp_dst_port,
@@ -2294,8 +2296,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv,
 	struct neighbour *n = NULL;
 	struct flowi4 fl4 = {};
 	char *encap_header;
-	int ttl, err;
-	u8 nud_state;
+	u8 nud_state, ttl;
+	int err;
 
 	if (max_encap_size < ipv4_encap_size) {
 		mlx5_core_warn(priv->mdev, "encap size %d too big, max supported is %d\n",
@@ -2316,6 +2318,9 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv,
 		err = -EOPNOTSUPP;
 		goto free_encap;
 	}
+
+	ttl = 0;
+
 	fl4.flowi4_tos = tun_key->tos;
 	fl4.daddr = tun_key->u.ipv4.dst;
 	fl4.saddr = tun_key->u.ipv4.src;
@@ -2399,8 +2404,8 @@ static int mlx5e_create_encap_header_ipv6(struct mlx5e_priv *priv,
 	struct neighbour *n = NULL;
 	struct flowi6 fl6 = {};
 	char *encap_header;
-	int err, ttl = 0;
-	u8 nud_state;
+	u8 ttl, nud_state;
+	int err;
 
 	if (max_encap_size < ipv6_encap_size) {
 		mlx5_core_warn(priv->mdev, "encap size %d too big, max supported is %d\n",
@@ -2422,6 +2427,8 @@ static int mlx5e_create_encap_header_ipv6(struct mlx5e_priv *priv,
 		goto free_encap;
 	}
 
+	ttl = 0;
+
 	fl6.flowlabel = ip6_make_flowinfo(RT_TOS(tun_key->tos), tun_key->label);
 	fl6.daddr = tun_key->u.ipv6.dst;
 	fl6.saddr = tun_key->u.ipv6.src;