net: Convert more users of mdiobus_* to mdiodev_*

This converts users of mdiobus to mdiodev using the following semantic
patch:

@@
identifier mdiodev;
expression regnum;
@@

- mdiobus_read(mdiodev->bus, mdiodev->addr, regnum)
+ mdiodev_read(mdiodev, regnum)

@@
identifier mdiodev;
expression regnum, val;
@@

- mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val)
+ mdiodev_write(mdiodev, regnum, val)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/base/regmap/regmap-mdio.c

@@ -14,7 +14,7 @@ static int regmap_mdio_read(struct mdio_device *mdio_dev, u32 reg, unsigned int
 {
 	int ret;
 
-	ret = mdiobus_read(mdio_dev->bus, mdio_dev->addr, reg);
+	ret = mdiodev_read(mdio_dev, reg);
 	if (ret < 0)
 		return ret;
 
@@ -24,7 +24,7 @@ static int regmap_mdio_read(struct mdio_device *mdio_dev, u32 reg, unsigned int
 
 static int regmap_mdio_write(struct mdio_device *mdio_dev, u32 reg, unsigned int val)
 {
-	return mdiobus_write(mdio_dev->bus, mdio_dev->addr, reg, val);
+	return mdiodev_write(mdio_dev, reg, val);
 }
 
 static int regmap_mdio_c22_read(void *context, unsigned int reg, unsigned int *val)
@@ -44,7 +44,7 @@ static int regmap_mdio_c22_write(void *context, unsigned int reg, unsigned int v
 	if (unlikely(reg & ~REGNUM_C22_MASK))
 		return -ENXIO;
 
-	return mdiobus_write(mdio_dev->bus, mdio_dev->addr, reg, val);
+	return mdiodev_write(mdio_dev, reg, val);
 }
 
 static const struct regmap_bus regmap_mdio_c22_bus = {

drivers/net/dsa/xrs700x/xrs700x_mdio.c

@@ -31,21 +31,21 @@ static int xrs700x_mdio_reg_read(void *context, unsigned int reg,
 
 	uval = (u16)FIELD_GET(GENMASK(31, 16), reg);
 
-	ret = mdiobus_write(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBA1, uval);
+	ret = mdiodev_write(mdiodev, XRS_MDIO_IBA1, uval);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_write returned %d\n", ret);
 		return ret;
 	}
 
 	uval = (u16)((reg & GENMASK(15, 1)) | XRS_IB_READ);
 
-	ret = mdiobus_write(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBA0, uval);
+	ret = mdiodev_write(mdiodev, XRS_MDIO_IBA0, uval);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_write returned %d\n", ret);
 		return ret;
 	}
 
-	ret = mdiobus_read(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBD);
+	ret = mdiodev_read(mdiodev, XRS_MDIO_IBD);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_read returned %d\n", ret);
 		return ret;
@@ -64,23 +64,23 @@ static int xrs700x_mdio_reg_write(void *context, unsigned int reg,
 	u16 uval;
 	int ret;
 
-	ret = mdiobus_write(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBD, (u16)val);
+	ret = mdiodev_write(mdiodev, XRS_MDIO_IBD, (u16)val);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_write returned %d\n", ret);
 		return ret;
 	}
 
 	uval = (u16)FIELD_GET(GENMASK(31, 16), reg);
 
-	ret = mdiobus_write(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBA1, uval);
+	ret = mdiodev_write(mdiodev, XRS_MDIO_IBA1, uval);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_write returned %d\n", ret);
 		return ret;
 	}
 
 	uval = (u16)((reg & GENMASK(15, 1)) | XRS_IB_WRITE);
 
-	ret = mdiobus_write(mdiodev->bus, mdiodev->addr, XRS_MDIO_IBA0, uval);
+	ret = mdiodev_write(mdiodev, XRS_MDIO_IBA0, uval);
 	if (ret < 0) {
 		dev_err(dev, "xrs mdiobus_write returned %d\n", ret);
 		return ret;

drivers/phy/broadcom/phy-bcm-ns-usb3.c

@@ -183,7 +183,7 @@ static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
 {
 	struct mdio_device *mdiodev = usb3->mdiodev;
 
-	return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
+	return mdiodev_write(mdiodev, reg, value);
 }
 
 static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)

drivers/phy/broadcom/phy-bcm-ns2-pcie.c

@@ -29,14 +29,12 @@ static int ns2_pci_phy_init(struct phy *p)
 	int rc;
 
 	/* select the AFE 100MHz block page */
-	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
-			   BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
+	rc = mdiodev_write(mdiodev, BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
 	if (rc)
 		goto err;
 
 	/* set the 100 MHz reference clock amplitude to 2.05 v */
-	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
-			   PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
+	rc = mdiodev_write(mdiodev, PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
 	if (rc)
 		goto err;