Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of updates intended for the 3.17 stream...

This is primarily a Bluetooth pull.  Gustavo says:

"A lot of patches to 3.17. The bulk of changes here are for LE support.
The 6loWPAN over Bluetooth now has it own module, we also have support for
background auto-connection and passive scanning, Bluetooth device address
provisioning, support for reading Bluetooth clock values and LE connection
parameters plus many many fixes."

The balance is just a pull of the wireless.git tree, to avoid some
pending merge problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bluetooth/Kconfig

@@ -30,8 +30,8 @@ config BT_HCIUART
 	help
 	  Bluetooth HCI UART driver.
 	  This driver is required if you want to use Bluetooth devices with
-	  serial port interface. You will also need this driver if you have 
-	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
+	  serial port interface. You will also need this driver if you have
+	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
 	  adapter and BrainBoxes Bluetooth PC Card.
 
 	  Say Y here to compile support for Bluetooth UART devices into the
@@ -41,9 +41,9 @@ config BT_HCIUART_H4
 	bool "UART (H4) protocol support"
 	depends on BT_HCIUART
 	help
-	  UART (H4) is serial protocol for communication between Bluetooth 
-	  device and host. This protocol is required for most Bluetooth devices 
-	  with UART interface, including PCMCIA and CF cards. 
+	  UART (H4) is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Bluetooth devices
+	  with UART interface, including PCMCIA and CF cards.
 
 	  Say Y here to compile support for HCI UART (H4) protocol.
 
@@ -52,7 +52,7 @@ config BT_HCIUART_BCSP
 	depends on BT_HCIUART
 	select BITREVERSE
 	help
-	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
+	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
 	  between Bluetooth device and host. This protocol is required for non
 	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
 	  CF cards.

drivers/bluetooth/ath3k.c

@@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0) },
 	{ USB_DEVICE(0x0CF3, 0x0036) },
 	{ USB_DEVICE(0x0CF3, 0x3004) },
-	{ USB_DEVICE(0x0CF3, 0x3005) },
 	{ USB_DEVICE(0x0CF3, 0x3008) },
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x0CF3, 0x311E) },
@@ -104,6 +103,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
+	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,7 +140,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
@@ -154,6 +153,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
@@ -290,10 +290,10 @@ static int ath3k_load_fwfile(struct usb_device *udev,
 	sent += size;
 	count -= size;
 
+	pipe = usb_sndbulkpipe(udev, 0x02);
+
 	while (count) {
 		size = min_t(uint, count, BULK_SIZE);
-		pipe = usb_sndbulkpipe(udev, 0x02);
-
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,

drivers/bluetooth/btmrvl_drv.h

@@ -68,6 +68,7 @@ struct btmrvl_adapter {
 	u8 hs_state;
 	u8 wakeup_tries;
 	wait_queue_head_t cmd_wait_q;
+	wait_queue_head_t event_hs_wait_q;
 	u8 cmd_complete;
 	bool is_suspended;
 };
@@ -89,6 +90,7 @@ struct btmrvl_private {
 #define MRVL_VENDOR_PKT			0xFE
 
 /* Vendor specific Bluetooth commands */
+#define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
 #define BT_CMD_AUTO_SLEEP_MODE		0xFC23
 #define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
 #define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
@@ -143,6 +145,7 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd);
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd);
 int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv);
 int btmrvl_enable_ps(struct btmrvl_private *priv);
 int btmrvl_prepare_command(struct btmrvl_private *priv);

drivers/bluetooth/btmrvl_main.c

@@ -114,6 +114,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
 				adapter->ps_state = PS_SLEEP;
+			wake_up_interruptible(&adapter->event_hs_wait_q);
 			BT_DBG("HS ACTIVATED!");
 		} else {
 			BT_DBG("HS Enable failed");
@@ -214,6 +215,23 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret;
+
+	if (!card->support_pscan_win_report)
+		return 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_PSCAN_WIN_REPORT_ENABLE,
+				   &subcmd, 1);
+	if (ret)
+		BT_ERR("PSCAN_WIN_REPORT_ENABLE command failed: %#x", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_pscan_window_reporting);
+
 int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv)
 {
 	int ret;
@@ -253,11 +271,31 @@ EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
 
 int btmrvl_enable_hs(struct btmrvl_private *priv)
 {
+	struct btmrvl_adapter *adapter = priv->adapter;
 	int ret;
 
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_ENABLE, NULL, 0);
-	if (ret)
+	if (ret) {
 		BT_ERR("Host sleep enable command failed\n");
+		return ret;
+	}
+
+	ret = wait_event_interruptible_timeout(adapter->event_hs_wait_q,
+					       adapter->hs_state,
+			msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED));
+	if (ret < 0) {
+		BT_ERR("event_hs_wait_q terminated (%d): %d,%d,%d",
+		       ret, adapter->hs_state, adapter->ps_state,
+		       adapter->wakeup_tries);
+	} else if (!ret) {
+		BT_ERR("hs_enable timeout: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = -ETIMEDOUT;
+	} else {
+		BT_DBG("host sleep enabled: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = 0;
+	}
 
 	return ret;
 }
@@ -358,6 +396,7 @@ static void btmrvl_init_adapter(struct btmrvl_private *priv)
 	}
 
 	init_waitqueue_head(&priv->adapter->cmd_wait_q);
+	init_waitqueue_head(&priv->adapter->event_hs_wait_q);
 }
 
 static void btmrvl_free_adapter(struct btmrvl_private *priv)
@@ -489,6 +528,8 @@ static int btmrvl_setup(struct hci_dev *hdev)
 
 	btmrvl_cal_data_dt(priv);
 
+	btmrvl_pscan_window_reporting(priv, 0x01);
+
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);
 
@@ -666,6 +707,7 @@ int btmrvl_remove_card(struct btmrvl_private *priv)
 	hdev = priv->btmrvl_dev.hcidev;
 
 	wake_up_interruptible(&priv->adapter->cmd_wait_q);
+	wake_up_interruptible(&priv->adapter->event_hs_wait_q);
 
 	kthread_stop(priv->main_thread.task);
 

drivers/bluetooth/btmrvl_sdio.c

@@ -108,27 +108,31 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 64,
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
 	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 256,
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
 	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
 	.sd_blksz_fw_dl	= 256,
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
 	.reg		= &btmrvl_reg_88xx,
+	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl	= 256,
 };
 
@@ -1067,6 +1071,7 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		card->firmware = data->firmware;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
+		card->support_pscan_win_report = data->support_pscan_win_report;
 	}
 
 	if (btmrvl_sdio_register_dev(card) < 0) {

drivers/bluetooth/btmrvl_sdio.h

@@ -89,6 +89,7 @@ struct btmrvl_sdio_card {
 	const char *helper;
 	const char *firmware;
 	const struct btmrvl_sdio_card_reg *reg;
+	bool support_pscan_win_report;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
 	struct btmrvl_private *priv;
@@ -98,6 +99,7 @@ struct btmrvl_sdio_device {
 	const char *helper;
 	const char *firmware;
 	const struct btmrvl_sdio_card_reg *reg;
+	const bool support_pscan_win_report;
 	u16 sd_blksz_fw_dl;
 };