net: hostess_sv11: fix the comments style issue

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wan/hostess_sv11.c

@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/*
- *	Comtrol SV11 card driver
+/*	Comtrol SV11 card driver
  *
  *	This is a slightly odd Z85230 synchronous driver. All you need to
  *	know basically is
@@ -44,17 +43,15 @@
 
 static int dma;
 
-/*
- *	Network driver support routines
+/*	Network driver support routines
  */
 
 static inline struct z8530_dev *dev_to_sv(struct net_device *dev)
 {
 	return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
 }
 
-/*
- *	Frame receive. Simple for our card as we do HDLC and there
+/*	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
 
@@ -65,24 +62,21 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
 	skb->dev = c->netdevice;
-	/*
-	 *	Send it to the PPP layer. We don't have time to process
+	/*	Send it to the PPP layer. We don't have time to process
 	 *	it right now.
 	 */
 	netif_rx(skb);
 }
 
-/*
- *	We've been placed in the UP state
+/*	We've been placed in the UP state
  */
 
 static int hostess_open(struct net_device *d)
 {
 	struct z8530_dev *sv11 = dev_to_sv(d);
 	int err = -1;
 
-	/*
-	 *	Link layer up
+	/*	Link layer up
 	 */
 	switch (dma) {
 	case 0:
@@ -127,8 +121,7 @@ static int hostess_open(struct net_device *d)
 static int hostess_close(struct net_device *d)
 {
 	struct z8530_dev *sv11 = dev_to_sv(d);
-	/*
-	 *	Discard new frames
+	/*	Discard new frames
 	 */
 	sv11->chanA.rx_function = z8530_null_rx;
 
@@ -154,8 +147,7 @@ static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 	return hdlc_ioctl(d, ifr, cmd);
 }
 
-/*
- *	Passed network frames, fire them downwind.
+/*	Passed network frames, fire them downwind.
  */
 
 static netdev_tx_t hostess_queue_xmit(struct sk_buff *skb,
@@ -172,8 +164,7 @@ static int hostess_attach(struct net_device *dev, unsigned short encoding,
 	return -EINVAL;
 }
 
-/*
- *	Description block for a Comtrol Hostess SV11 card
+/*	Description block for a Comtrol Hostess SV11 card
  */
 
 static const struct net_device_ops hostess_ops = {
@@ -187,8 +178,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 {
 	struct z8530_dev *sv;
 	struct net_device *netdev;
-	/*
-	 *	Get the needed I/O space
+	/*	Get the needed I/O space
 	 */
 
 	if (!request_region(iobase, 8, "Comtrol SV11")) {
@@ -200,8 +190,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 	if (!sv)
 		goto err_kzalloc;
 
-	/*
-	 *	Stuff in the I/O addressing
+	/*	Stuff in the I/O addressing
 	 */
 
 	sv->active = 0;
@@ -216,7 +205,8 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 	outb(0, iobase + 4);		/* DMA off */
 
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
-	   IRQ ;) - This is one driver RtLinux is made for */
+	 * IRQ ;) - This is one driver RtLinux is made for
+	 */
 
 	if (request_irq(irq, z8530_interrupt, 0,
 			"Hostess SV11", sv) < 0) {
@@ -230,8 +220,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 	sv->chanB.dev = sv;
 
 	if (dma) {
-		/*
-		 *	You can have DMA off or 1 and 3 thats the lot
+		/*	You can have DMA off or 1 and 3 thats the lot
 		 *	on the Comtrol.
 		 */
 		sv->chanA.txdma = 3;
@@ -246,11 +235,11 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 	}
 
 	/* Kill our private IRQ line the hostess can end up chattering
-	   until the configuration is set */
+	 * until the configuration is set
+	 */
 	disable_irq(irq);
 
-	/*
-	 *	Begin normal initialise
+	/*	Begin normal initialise
 	 */
 
 	if (z8530_init(sv)) {
@@ -266,8 +255,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
 
 	enable_irq(irq);
 
-	/*
-	 *	Now we can take the IRQ
+	/*	Now we can take the IRQ
 	 */
 
 	sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);