Merge remote-tracking branches 'asoc/topic/arizona', 'asoc/topic/atme…

…l', 'asoc/topic/cirrus', 'asoc/topic/cs4271', 'asoc/topic/cs42l51', 'asoc/topic/cs42l52', 'asoc/topic/cs42l73' and 'asoc/topic/da7210' into asoc-next

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -18,6 +18,7 @@ atmel,24c02		i2c serial eeprom  (24cxx)
 atmel,at97sc3204t	i2c trusted platform module (TPM)
 capella,cm32181		CM32181: Ambient Light Sensor
 catalyst,24c32		i2c serial eeprom
+cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
 dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
 dallas,ds1338		I2C RTC with 56-Byte NV RAM
 dallas,ds1339		I2C Serial Real-Time Clock

Documentation/devicetree/bindings/misc/atmel-ssc.txt

@@ -17,6 +17,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
   See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
 - dma-names: Must be "tx", "rx".
 
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+
 Examples:
 - PDC transfer:
 ssc0: ssc@fffbc000 {

drivers/misc/atmel-ssc.c

@@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+		ssc->clk_from_rk_pin =
+			of_property_read_bool(np, "atmel,clk-from-rk-pin");
+	}
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(ssc->regs))

include/linux/atmel-ssc.h

@@ -18,6 +18,7 @@ struct ssc_device {
 	struct clk		*clk;
 	int			user;
 	int			irq;
+	bool			clk_from_rk_pin;
 };
 
 struct ssc_device * __must_check ssc_request(unsigned int ssc_num);

include/linux/mfd/arizona/registers.h

@@ -1702,9 +1702,9 @@
 /*
  * R373 (0x175) - FLL1 Control 5
  */
-#define ARIZONA_FLL1_FRATIO_MASK                 0x0700  /* FLL1_FRATIO - [10:8] */
-#define ARIZONA_FLL1_FRATIO_SHIFT                     8  /* FLL1_FRATIO - [10:8] */
-#define ARIZONA_FLL1_FRATIO_WIDTH                     3  /* FLL1_FRATIO - [10:8] */
+#define ARIZONA_FLL1_FRATIO_MASK                 0x0F00  /* FLL1_FRATIO - [11:8] */
+#define ARIZONA_FLL1_FRATIO_SHIFT                     8  /* FLL1_FRATIO - [11:8] */
+#define ARIZONA_FLL1_FRATIO_WIDTH                     4  /* FLL1_FRATIO - [11:8] */
 #define ARIZONA_FLL1_OUTDIV_MASK                 0x000E  /* FLL1_OUTDIV - [3:1] */
 #define ARIZONA_FLL1_OUTDIV_SHIFT                     1  /* FLL1_OUTDIV - [3:1] */
 #define ARIZONA_FLL1_OUTDIV_WIDTH                     3  /* FLL1_OUTDIV - [3:1] */

sound/soc/atmel/atmel_ssc_dai.c

@@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 {
 	int id = dai->id;
 	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
 	struct atmel_pcm_dma_params *dma_params;
 	int dir, channels, bits;
 	u32 tfmr, rfmr, tcmr, rcmr;
@@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, start_event)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, start_event)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)

sound/soc/atmel/sam9g20_wm8731.c

@@ -155,25 +155,14 @@ static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
 		return ret;
 	}
 
-	/* Add specific widgets */
-	snd_soc_dapm_new_controls(dapm, at91sam9g20ek_dapm_widgets,
-				  ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
-	/* Set up specific audio path interconnects */
-	snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
 	/* not connected */
 	snd_soc_dapm_nc_pin(dapm, "RLINEIN");
 	snd_soc_dapm_nc_pin(dapm, "LLINEIN");
 
-#ifdef ENABLE_MIC_INPUT
-	snd_soc_dapm_enable_pin(dapm, "Int Mic");
-#else
-	snd_soc_dapm_nc_pin(dapm, "Int Mic");
+#ifndef ENABLE_MIC_INPUT
+	snd_soc_dapm_nc_pin(&rtd->card->dapm, "Int Mic");
 #endif
 
-	/* always connected */
-	snd_soc_dapm_enable_pin(dapm, "Ext Spk");
-
 	return 0;
 }
 
@@ -194,6 +183,11 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
 	.dai_link = &at91sam9g20ek_dai,
 	.num_links = 1,
 	.set_bias_level = at91sam9g20ek_set_bias_level,
+
+	.dapm_widgets = at91sam9g20ek_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
+	.dapm_routes = intercon,
+	.num_dapm_routes = ARRAY_SIZE(intercon),
 };
 
 static int at91sam9g20ek_audio_probe(struct platform_device *pdev)

sound/soc/cirrus/Kconfig

@@ -1,6 +1,6 @@
 config SND_EP93XX_SOC
 	tristate "SoC Audio support for the Cirrus Logic EP93xx series"
-	depends on (ARCH_EP93XX || COMPILE_TEST) && SND_SOC
+	depends on ARCH_EP93XX || COMPILE_TEST
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y or M if you want to add support for codecs attached to