Skip to content

Commit

Permalink
Merge branch 'net-ipa-kill-endpoint-delay-mode-workaround'
Browse files Browse the repository at this point in the history
Alex Elder says:

====================
net: ipa: kill endpoint delay mode workaround

A "delay mode" feature was put in place to work around a problem
where packets could passed to the modem before it was ready to
handle them.  That problem no longer exists, and we don't need the
workaround any more so get rid of it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
  • Loading branch information
David S. Miller committed May 7, 2020
2 parents 9c729e7 + a4dcad3 commit 6a5dc76
Show file tree
Hide file tree
Showing 3 changed files with 49 additions and 43 deletions.
1 change: 0 additions & 1 deletion drivers/net/ipa/ipa_data-sdm845.c
Original file line number Diff line number Diff line change
Expand Up @@ -74,7 +74,6 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
.tx = {
.status_endpoint =
IPA_ENDPOINT_MODEM_AP_RX,
.delay = true,
},
},
},
Expand Down
6 changes: 0 additions & 6 deletions drivers/net/ipa/ipa_data.h
Original file line number Diff line number Diff line change
Expand Up @@ -80,18 +80,12 @@ struct gsi_channel_data {
/**
* struct ipa_endpoint_tx_data - configuration data for TX endpoints
* @status_endpoint: endpoint to which status elements are sent
* @delay: whether endpoint starts in delay mode
*
* Delay mode prevents a TX endpoint from transmitting anything, even if
* commands have been presented to the hardware. Once the endpoint exits
* delay mode, queued transfer commands are sent.
*
* The @status_endpoint is only valid if the endpoint's @status_enable
* flag is set.
*/
struct ipa_endpoint_tx_data {
enum ipa_endpoint_name status_endpoint;
bool delay;
};

/**
Expand Down
85 changes: 49 additions & 36 deletions drivers/net/ipa/ipa_endpoint.c
Original file line number Diff line number Diff line change
Expand Up @@ -284,25 +284,52 @@ static struct gsi_trans *ipa_endpoint_trans_alloc(struct ipa_endpoint *endpoint,
/* suspend_delay represents suspend for RX, delay for TX endpoints.
* Note that suspend is not supported starting with IPA v4.0.
*/
static int
static bool
ipa_endpoint_init_ctrl(struct ipa_endpoint *endpoint, bool suspend_delay)
{
u32 offset = IPA_REG_ENDP_INIT_CTRL_N_OFFSET(endpoint->endpoint_id);
struct ipa *ipa = endpoint->ipa;
bool state;
u32 mask;
u32 val;

/* assert(ipa->version == IPA_VERSION_3_5_1 */
/* Suspend is not supported for IPA v4.0+. Delay doesn't work
* correctly on IPA v4.2.
*
* if (endpoint->toward_ipa)
* assert(ipa->version != IPA_VERSION_4.2);
* else
* assert(ipa->version == IPA_VERSION_3_5_1);
*/
mask = endpoint->toward_ipa ? ENDP_DELAY_FMASK : ENDP_SUSPEND_FMASK;

val = ioread32(ipa->reg_virt + offset);
if (suspend_delay == !!(val & mask))
return -EALREADY; /* Already set to desired state */
/* Don't bother if it's already in the requested state */
state = !!(val & mask);
if (suspend_delay != state) {
val ^= mask;
iowrite32(val, ipa->reg_virt + offset);
}

val ^= mask;
iowrite32(val, ipa->reg_virt + offset);
return state;
}

return 0;
/* We currently don't care what the previous state was for delay mode */
static void
ipa_endpoint_program_delay(struct ipa_endpoint *endpoint, bool enable)
{
/* assert(endpoint->toward_ipa); */

(void)ipa_endpoint_init_ctrl(endpoint, enable);
}

/* Returns previous suspend state (true means it was enabled) */
static bool
ipa_endpoint_program_suspend(struct ipa_endpoint *endpoint, bool enable)
{
/* assert(!endpoint->toward_ipa); */

return ipa_endpoint_init_ctrl(endpoint, enable);
}

/* Enable or disable delay or suspend mode on all modem endpoints */
Expand All @@ -311,7 +338,7 @@ void ipa_endpoint_modem_pause_all(struct ipa *ipa, bool enable)
bool support_suspend;
u32 endpoint_id;

/* DELAY mode doesn't work right on IPA v4.2 */
/* DELAY mode doesn't work correctly on IPA v4.2 */
if (ipa->version == IPA_VERSION_4_2)
return;

Expand All @@ -325,8 +352,10 @@ void ipa_endpoint_modem_pause_all(struct ipa *ipa, bool enable)
continue;

/* Set TX delay mode, or for IPA v3.5.1 RX suspend mode */
if (endpoint->toward_ipa || support_suspend)
(void)ipa_endpoint_init_ctrl(endpoint, enable);
if (endpoint->toward_ipa)
ipa_endpoint_program_delay(endpoint, enable);
else if (support_suspend)
(void)ipa_endpoint_program_suspend(endpoint, enable);
}
}

Expand Down Expand Up @@ -1133,8 +1162,8 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)
{
struct device *dev = &endpoint->ipa->pdev->dev;
struct ipa *ipa = endpoint->ipa;
bool endpoint_suspended = false;
struct gsi *gsi = &ipa->gsi;
bool suspended = false;
dma_addr_t addr;
bool legacy;
u32 retries;
Expand Down Expand Up @@ -1164,8 +1193,7 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)

/* Make sure the channel isn't suspended */
if (endpoint->ipa->version == IPA_VERSION_3_5_1)
if (!ipa_endpoint_init_ctrl(endpoint, false))
endpoint_suspended = true;
suspended = ipa_endpoint_program_suspend(endpoint, false);

/* Start channel and do a 1 byte read */
ret = gsi_channel_start(gsi, endpoint->channel_id);
Expand Down Expand Up @@ -1210,8 +1238,8 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)
err_endpoint_stop:
ipa_endpoint_stop(endpoint);
out_suspend_again:
if (endpoint_suspended)
(void)ipa_endpoint_init_ctrl(endpoint, true);
if (suspended)
(void)ipa_endpoint_program_suspend(endpoint, true);
dma_unmap_single(dev, addr, len, DMA_FROM_DEVICE);
out_kfree:
kfree(virt);
Expand Down Expand Up @@ -1312,31 +1340,16 @@ int ipa_endpoint_stop(struct ipa_endpoint *endpoint)

static void ipa_endpoint_program(struct ipa_endpoint *endpoint)
{
struct device *dev = &endpoint->ipa->pdev->dev;
int ret;

if (endpoint->toward_ipa) {
bool delay_mode = endpoint->data->tx.delay;

ret = ipa_endpoint_init_ctrl(endpoint, delay_mode);
/* Endpoint is expected to not be in delay mode */
if (!ret != delay_mode) {
dev_warn(dev,
"TX endpoint %u was %sin delay mode\n",
endpoint->endpoint_id,
delay_mode ? "already " : "");
}
if (endpoint->ipa->version != IPA_VERSION_4_2)
ipa_endpoint_program_delay(endpoint, false);
ipa_endpoint_init_hdr_ext(endpoint);
ipa_endpoint_init_aggr(endpoint);
ipa_endpoint_init_deaggr(endpoint);
ipa_endpoint_init_seq(endpoint);
} else {
if (endpoint->ipa->version == IPA_VERSION_3_5_1) {
if (!ipa_endpoint_init_ctrl(endpoint, false))
dev_warn(dev,
"RX endpoint %u was suspended\n",
endpoint->endpoint_id);
}
if (endpoint->ipa->version == IPA_VERSION_3_5_1)
(void)ipa_endpoint_program_suspend(endpoint, false);
ipa_endpoint_init_hdr_ext(endpoint);
ipa_endpoint_init_aggr(endpoint);
}
Expand Down Expand Up @@ -1448,7 +1461,7 @@ void ipa_endpoint_suspend_one(struct ipa_endpoint *endpoint)
* aggregation frame, then simulating the arrival of such
* an interrupt.
*/
WARN_ON(ipa_endpoint_init_ctrl(endpoint, true));
(void)ipa_endpoint_program_suspend(endpoint, true);
ipa_endpoint_suspend_aggr(endpoint);
}

Expand All @@ -1471,7 +1484,7 @@ void ipa_endpoint_resume_one(struct ipa_endpoint *endpoint)
/* IPA v3.5.1 doesn't use channel start for resume */
start_channel = endpoint->ipa->version != IPA_VERSION_3_5_1;
if (!endpoint->toward_ipa && !start_channel)
WARN_ON(ipa_endpoint_init_ctrl(endpoint, false));
(void)ipa_endpoint_program_suspend(endpoint, false);

ret = gsi_channel_resume(gsi, endpoint->channel_id, start_channel);
if (ret)
Expand Down

0 comments on commit 6a5dc76

Please sign in to comment.