Merge tag 'fixes-for-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.8-rc6

Unfortunately we have a bogus dwc3 patch leaked through the cracks and
got merged into Linus' HEAD. That patch ended up causing off-by-1 error
in our TRB accounting logic. Thankfully John Youn found out the problem
and we provided a revert to the bogus dwc3 patch in no time.

Apart from this off-by-1 error, we have two fixes to the Renesas drivers,
a small fix to our generic phy driver, a NULL pointer dereference fix for
f_eem and a build warning fix in dwc3.

drivers/usb/dwc3/dwc3-pci.c

@@ -249,7 +249,9 @@ static int dwc3_pci_runtime_resume(struct device *dev)
 
 	return pm_runtime_get(&dwc3->dev);
 }
+#endif /* CONFIG_PM */
 
+#ifdef CONFIG_PM_SLEEP
 static int dwc3_pci_pm_dummy(struct device *dev)
 {
 	/*
@@ -262,7 +264,7 @@ static int dwc3_pci_pm_dummy(struct device *dev)
 	 */
 	return 0;
 }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
 
 static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy)

drivers/usb/dwc3/gadget.c

@@ -884,9 +884,12 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 		return DWC3_TRB_NUM - 1;
 	}
 
-	trbs_left = dep->trb_dequeue - dep->trb_enqueue - 1;
+	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
 	trbs_left &= (DWC3_TRB_NUM - 1);
 
+	if (dep->trb_dequeue < dep->trb_enqueue)
+		trbs_left--;
+
 	return trbs_left;
 }
 

drivers/usb/gadget/function/f_eem.c

@@ -342,7 +342,7 @@ static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
 	struct sk_buff	*skb2 = NULL;
 	struct usb_ep	*in = port->in_ep;
 	int		headroom, tailroom, padlen = 0;
-	u16		len = skb->len;
+	u16		len;
 
 	if (!skb)
 		return NULL;

drivers/usb/gadget/udc/renesas_usb3.c

@@ -106,6 +106,7 @@
 
 /* DRD_CON */
 #define DRD_CON_PERI_CON	BIT(24)
+#define DRD_CON_VBOUT		BIT(0)
 
 /* USB_INT_ENA_1 and USB_INT_STA_1 */
 #define USB_INT_1_B3_PLLWKUP	BIT(31)
@@ -363,6 +364,7 @@ static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
 {
 	/* FIXME: How to change host / peripheral mode as well? */
 	usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+	usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
 
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
 	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);

drivers/usb/phy/phy-generic.c

@@ -144,14 +144,18 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
 int usb_gen_phy_init(struct usb_phy *phy)
 {
 	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+	int ret;
 
 	if (!IS_ERR(nop->vcc)) {
 		if (regulator_enable(nop->vcc))
 			dev_err(phy->dev, "Failed to enable power\n");
 	}
 
-	if (!IS_ERR(nop->clk))
-		clk_prepare_enable(nop->clk);
+	if (!IS_ERR(nop->clk)) {
+		ret = clk_prepare_enable(nop->clk);
+		if (ret)
+			return ret;
+	}
 
 	nop_reset(nop);
 

drivers/usb/renesas_usbhs/mod.c

@@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	if (usbhs_mod_is_host(priv))
 		usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
 
-	usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+	/*
+	 * The driver should not clear the xxxSTS after the line of
+	 * "call irq callback functions" because each "if" statement is
+	 * possible to call the callback function for avoiding any side effects.
+	 */
+	if (irq_state.intsts0 & BRDY)
+		usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
 	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
-	usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
+	if (irq_state.intsts0 & BEMP)
+		usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
 
 	/*
 	 * call irq callback functions